HUAWEI E600 Data Card User Manual
Contents
1. Data Card User Manual HUAWEI Wonderful Communication Mobile Life Welcome to use E600 Data Card from Huawei Technologies Co Ltd HUAWEI E600 Data Card User Manual Copyright 2005 Huawei Technologies Co Ltd All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd Trademarks Wh and HUAWEI are trademarks of Huawei Technologies Co Ltd All other trademarks mentioned in this manual are the property of their respective holders Notice The information in this manual is subject to change without notice Every effort has been made in the preparation of this manual to ensure accuracy of the contents but all statements information and recommendations in this manual do not constitute the warranty of any kind expressed or implied Safety Precautions Please read the safety precautions carefully to ensure the correct and safe use of your wireless device For detailed information please see the section of Warnings and Precautions Do not switch your wireless device on when the use of wireless devices is prohibited or when the wireless device may cause interference or danger Do not use your wireless device while driving Follow relevant rules or regulations in hospitals and health care facilities Switch your wireless device off near medical devices Switch your wireles2. Note If the auto run program does not start go to the drive path find the Setup exe file and double click on it and then the program begins running 3 The Choose Language dialog box appears Select the needed installation language and click lt OK gt 4 Follow the instructions of the program 7 5 Once the installation is completed the shortcut icon Fe for the E600 Manager appears on the desktop 5 Installation Guide Installing the E600 Hardware Driver 1 Insert the E600 containing the SIM card into the PCMCIA slot of your computer 2 The system will find the new hardware and start the New Hardware Installation Wizard automatically 3 Ifa prompt such as The software failed to pass the Windows logo test appears click lt Continue Anyway gt to continue 4 When the system prompts you that the installation is finished click lt Finish gt to finish the installation of the E600 driver Removing the E600 If you want to remove the E600 from the computer please do it after having stopped it through the hardware removing function provided by Windows When you want to remove the E600 from your computer follow the procedure below 1 Double click on the icon on the lower right of the screen of your computer a dialog box of Removed device safely will appear 2 Stop the use of the E600 hardware NEC PCI to USB Open Host Controller 3 When the system prompts you that it is safe to remove the device pull ou
3. Do not place the wireless device on the seat or other places where it can get moving in a sudden stop or collision Observe the rules and regulations of airline companies Switch your wireless device off before boarding an aircraft P 63 16 Warnings and Precautions Operating Environment e Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device Radiation from the wireless device may erase the information stored on them e Do not put your wireless device in containers with strong magnetic field such as the induction cooker and microwave oven Otherwise circuit failure may happen as a result e Do not leave your wireless device in a high temperature place or use them in a place with flammable gas Otherwise malfunction of the product fire or explosion may happen as a result e The wireless device is not water resistant Keep it dry in use Otherwise malfunctions due to short circuit or corrosion of the product may happen as a result e Do not subject your wireless device to serious collision or shock or it may bring about malfunctions Do not place the wireless device in the area over the air bag or in the air bag deployment area Otherwise the wireless device may hurt you owing to the strong force when the air bag inflates e Please try to avoid using this device under thunder storms in case you are exposed to lightening shock or other injuries e Put your wireless device in pl
4. Forwarding Text Messages In the Outbox you can forward the messages that have already been sent out Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and click lt Forward gt 2 Input the telephone number you want to forward to in the blank column behind the Contacts or Click lt Contacts gt to select the number you want 3 The content of the message you want to forward appears automatically in the text box You can edit or modify it 4 Click lt Send gt to forward the message 34 TE 10 Messaging Making Calls In the Outbox you can dial out a number of a receiver whom a message has been sent to Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and click lt Call gt 2 The call service screen is displayed the number of the receiver whom this message was sent to appears on the screen and the number is dialed out automatically at the same time Deleting Text Messages You can remove the messages from the Outbox Step Operation and description 1 Select one or more messages and click lt Delete gt Double click a message to go to the screen with the detailed contents then click lt Delete gt 2 The messages are removed to the trash Saving Numbers You can save the receiver number of a message in the Outbox to your contacts Step Operation and description 1
5. Select a message or double click it to go to the screen with the detailed message and click lt Get Number gt 2 The new contacts screen is displayed and the receiver number of this message appears automatically in the Mobile column 3 Input the information for this number as required 4 Click lt Save gt nwo QE 10 Messaging Draft The new messages that you wrote on the Write window if having been saved will have been stored in the Draft Up to 1000 text messages can be stored in the Draft When you save these messages only the contents of them are saved in the Draft the numbers you specified are not saved Access the SMS screen click lt Draft gt and the Draft screen is displayed Editing Text Messages You can edit a message in the Draft Step Operation and description 1 Select a message and click lt Edit gt or Double click on a message item 2 The Write screen is displayed change the information and select lt Send gt lt Save gt or lt Clear gt Deleting Text Messages You can remove the messages in the Draft Step Operation and description 1 Select one or more messages and click lt Delete gt 2 The messages are removed to the trash Trash The messages you removed from the Inbox Outbox and Draft are all stored in the Trash Up to 1000 text messages can be stored in the Trash When the trash is full and another message is removed to it the earliest message in this box is removed
6. automatically Access the SMS screen click lt Trash gt and the trash screen is displayed 36 SEE 10 Messaging Restoring Text Messages You can restore text messages in the trash to their original boxes Step Operation and description 1 Select one or more messages and click lt Restore gt 2 The messages are restored to the original boxes they stayed in before they were removed Deleting Text Messages If you remove a message from the trash it is permanently removed Step Operation and description 1 Select one or more messages and click lt Delete gt 2 If you are sure to do this click lt OK gt and the messages are removed permanently Reports The Reports contains all the message reports you have received Up to 1000 text message reports can be stored in the Reports When this box is full and another report is coming in the earliest report in this box is removed automatically Access the SMS screen click lt Reports gt and the Reports box is displayed Step Operation and description 1 Select one or more messages and click lt Delete gt 2 If you are sure click lt OK gt and this return notification SMS message is removed nwo EF 10 Messaging Text Message Import Management You can import messages from the SIM card to the E600 Step Operation and description 1 Select File gt Import Message from SIM Card 2 Messages in the SIM card are imported into their respective boxes in the E600 an
7. message After the message is sent out it is saved automatically to the Outbox If the sending fails you will be prompted whether to send again If you cancel the sending the message will be saved automatically to the Outbox e Click lt Save gt to save the message to the Draft e Click lt Clear gt to clear the contacts and the text message you just input Note When your text message contains no more than 160 characters it will be sent as one message If this number is exceeded the message will be divided into several messages and sent one by one When you use the SMS Short Messaging Service you can always operate in this way to go to the Write screen or select contacts Inbox The Inbox contains the text messages you have received It supports up to 1000 messages When the Inbox is full and a new message is coming the earliest message in the Inbox is removed automatically to the Trash The amount of all the unread messages is displayed under the status information in the main screen in real time if any such message exists Go to the SMS window and click lt Inbox gt to open the Inbox Going to the Inbox to View Your Text Messages 1 Go to the Inbox to View Your SMS Messages Directly You may go to the Inbox to browse and view your text messages 30 TIE 10 Messaging Step Operation and description 1 fi Click on or select Tools gt SMS the SMS screen is displayed 2 Click on lt Inbox gt to go to
8. network or no network is currently available The network is normal A call is coming or data transmission is doing in the case of data service 4 Getting Started Computer Configuration Requirements To use the E600 the following are required for your computer A type H PCMCIA Card slot supporting CARDBUS e A Pentium 100 processor or above 32MB RAM or above Windows XP or Windows 2000 operating system Display resolution of 800 x 600 pixels or above that of 1024 x 768 pixels is recommended Preparing the E600 1 Take out the E600 from the protective cover 2 As shown in the following figure place the SIM Subscriber Identity Module card into the slot on the back of the E600 card with its golden contact downwards and the blunt corner inwards and make sure that the card is fully in place HUAWEI a Wf Installation Guide There are slight differences in the installation process between Windows XP Windows 2000 and so on During the actual installation if any step differs from what is described here please follow the specific installation instructions Here we will take the Windows XP operating system as an example Note Please make sure that the E600 Manager has been installed before the E600 card is inserted into the computer Installing the E600 Manager 1 Put the E600 CD into the CD ROM drive 2 The setup program will start automatically and the E600 installation screen will appear later
9. the System Prompts Import Message from SIM Card or the like After Selecting No Still Want to Import the Message What shall Do Select File gt Import Message from SIM Card to import the message from the SIM Card to the PC How to Dial the Telephone Numbers with Sign Double click on the telephone service interface or input them through the PC keyboard Why cannot Paste the Telephone Numbers Only such telephone numbers as 0123456789 are legal Confirm no other character is contained in the cut or pasted texts 62 INE 1 6 Warnings and Precautions Electronic Device e Switch your wireless device off near high precision electronic devices The phone may affect the performance of these devices e Such devices include hearing aids pacemakers fire alarm systems automatic gates and other automatic control devices If you are using an electronic medical device consult the device manufacturer and confirm whether the radio wave affects the operation of this electronic device Hospital Pay attention to the following points in hospitals or health care facilities e Do not take your wireless device into the operating room OR intensive care unit ICU or coronary care unit CCU e Switch your wireless device off near medial devices Observe any instructions wherever the use of wireless devices is prohibited Traffic Safety Do not use your wireless device while driving
10. whena Click lt Browse gt to select a sound file message is received Click lt Play gt to hear the sound Once a sound file is selected it plays when a new message comes Note The sound alert files can be in wav or mid form s we 13 Settings and Information Query e If you click lt Default gt all the items on the Prompts tab recover to the default values that is being checked Standby Hibernate Settings Enter the Standby Hibernate tab and then you have the following options Option Description Prevent Standby or To prevent the computer from standby or hibernate Hibernate mode Allow Standby or To allow the computer to start the standby or Hibernate hibernate mode Note If you click lt Default gt the Standby Hibernate status recovers to its default value that is allow standby or hibernate and close connection Diagnostics E600 allows you to query information about the E600 and the SIM card Select Tools gt Diagnostics Messages in SIM This information is displayed in the format of XX YY here XX is the number of the existing text messages and YY is the capacity of the SIM card Contacts in SIM This information is displayed in the format of XX YY here XX is the number of the existing contacts and YY is the capacity of the SIM card IMEI Number the IMEI number of the E600 API Version the version of the API Firmware Version the board so
11. Emergency Call ivc icsccscccaiccscoscoctvedd en n anea a i iit 64 Rules for Exposure to Radio Frequency Energy ccsesceescesseseneeeseeees 64 HUAWEI iii Overview Welcome to use the HUAWEI E600 Data Card With the E600 you can easily e Access the Internet Make and answer calls Send and receive text messages e Use the function of contacts e Use the function of call register service 2 What s in Your Packing Box Your E600 packing box contains An E600 data card An earphone e A CD ROM containing a PDF document of user manual and a setup program A quick start guide Getting to Know Your E600 The following is an illustration of your E600 A Antenna Indicator Earphone jack Note This is a schematic picture of an E600 profile your E600 card may be different from this schematic picture It is subject to your actual one Antenna When using the E600 you may adjust the angle of the antenna according to the actual signal reception situation so as to reach a most favorable signal reception quality 3 Getting to Know Your E600 Earphone Jack Please insert your earphone into the jack on the E600 when you have call service Indicator This LED indicates the status of your E600 Normally the indicator is green Indicator status Meaning Single flash once in every two seconds Double flash once in every two seconds Quick flash The E600 is searching for a
12. aces beyond the reach of children Do not allow children to use the wireless device without guidance e Do not touch the antenna when a call is going on Touching the antenna may affect call quality and cause the wireless device to operate at a power level higher than needed Emergency Call You can use your wireless device for emergency calls However connections in all conditions cannot be guaranteed You should never rely solely on the wireless device for essential communications Rules for Exposure to Radio Frequency Energy The device is designed not to exceed the limits for exposure to RF energy set by ICNIRP International Commission on Non ionizing Radiation Protection The limits include a margin designed to assure the safety of all persons regardless of Sh ve 16 Warnings and Precautions age and health The rules for exposure to radio frequency energy adopt SAR as the measurement unit SAR is measured with a standard mode That is the wireless device is transmitted with authorized maximum transmit power in all used bands The SAR limit suggested by ICNIRP is 2W kg 10 g Average The measured maximum SAR value of wireless device is 0 163W kg 10g Average Ver V1 15 BOM 31014922 nwo os
13. can remove items from the Received calls Step Operation and description 1 Select one or more items 2 Click lt Delete gt If you are sure click lt OK gt Dialled Calls Click lt Dialled calls gt and the Dialled calls screen is displayed Sending Text Messages You can send messages to the numbers in the Dialled calls items 50 TIE 12 Call Register Step Operation and description 1 Select one or more items 2 Click lt Send gt and the E600 automatically retrieves the numbers in the items you select and the Write SMS screen is displayed 3 The numbers retrieved automatically are displayed in the blank column behind the Contacts Input the content for the message and click lt Send gt Make Calls You can dial out a number in a Dialled calls item Step Operation and description 1 Select an item 2 Click lt Call gt 3 The Call service screen is displayed and the number you have selected appears automatically in the screen and at the same time the number will be dialed out automatically Saving Numbers You can save numbers in the Dialled calls items pe dE 12 Call Register Step Operation and description 1 Select an item 2 Click lt Get Number gt 3 The New contacts screen is displayed By default the E600 will save the number of this item to the Mobile column in the contacts You can change the number if you think that this number is not the one you want to save to the Mobile
14. column 4 Click lt Save gt Removing Items You can remove items from the Dialled calls Step Operation and description 1 Select one or more items 2 Click lt Delete gt If you are sure click lt OK gt 52 TIE 1 3 Settings and Information Query Choosing Network You can manually search for a network or make the E600 search for a network automatically Select Settings gt Choose Network Auto The E600 automatically searches for a network and register itself to the network which it has found e Manual You can make the search manually and select a network to register the E600 Choosing Connection Type Select Settings gt Choose Connection Type on the menu bar Option Description GPRS Preferred The E600 will choose GPRS in precedence if possible 3G Preferred The E600 will choose 3G in precedence if possible GPRS Only The E600 will choose GPRS only 3G Only The E600 will choose 3G only Managing the PIN Code The PIN code is used to prevent your SIM card from the invalid use Generally the PIN code is provided along with your SIM card You can change your PIN Ps 13 Settings and Information Query code and you can also enable disable the PIN feature If you enable the feature you must enter a PIN code when the E600 starts up PIN Code Modification You can change your PIN code Step Operation and description 1 Select Settings gt Modify PIN Code 2 Enter the current PIN c
15. d 3 Once the importing is completed a prompt appears indicating the result 4 TS 11 Managing Your Contacts Exporting Contacts E600 allows you to export the items from the E600 contacts to the SIM card or a file Exporting Contacts Items to a File The procedure is as follows Step Operation and description 1 Select File gt Export Contacts gt To File 2 In the Save as window input a file name with csv as its extension 3 Click lt Save gt and the items in the E600 contacts are exported to the specified file Exporting Contacts Items to the SIM Card The procedure is as follows Step Operation and description 1 Select one or more items in the contacts Note If no contact information is selected this function of export is unavailable 2 Select File gt Export Contacts gt To SIM Card 3 Once the exporting is completed a prompt appears indicating the result Note The storage capacity of the SIM card for the contacts depends on the card itself When you export the contacts to the SIM card the E600 will interrupt the exporting process if the contacts you are exporting exceed the capacity of the SIM card If this happens however the contents that have already been exported by the process will remain unchanged fr 45 1 2 Call Register The call register contains information about dialed received and missed calls Each kind of register supports up to 1000 items A Click Ea or selec
16. d in the minimized mode when it starts or otherwise Option When the box is checked Launch data cardon The E600 manager starts along with the Windows Windows start up Start with the main The program is displayed in the minimized mode when window minimized it starts Note If you click lt Default gt the two items on this tab recover to the default values that is being unchecked Call Alerts Settings Selecting the Prompts tab the options you can select for the coming call alerts nwo 5s 13 Settings and Information Query are sound alert and display alert Option Description Display alerts when Check the box and an alert window is displayed when a call coming a call comes You can e Click lt Answer gt to answer the call or e Click lt Reject gt to reject the call Sound Click lt Browse gt to select a sound file e Click lt Play gt to hear the sound Once a sound file is selected it plays when a call comes Note The alert sound files can be in wav or mid form Message Alerts Settings Selecting the Prompts tab the options you can select for the coming message alerts are sound alert and display alert Option Description Display alerts when Check the box and an alert window is displayed when a message is a new message comes You can received e Click lt View gt to see the new message or e Click lt Close gt to leave the message unseen Play a sound
17. d the original messages in the card are all removed Note When the E600 Manager is started or the E600 is inserted the program searches the SIM card for the unread message If there is any you are prompted to import the messages to the E600 If you agree the unread messages will be imported to the E600 manager SMS Settings Select Settings gt SMS Settings and the SMS settings screen is displayed 38 ve Option 10 Messaging Description Request status report You can enable or disable this function When the function is enabled and you are sending a message the network will send a message to inform you that the receiver has got the message you have sent Use same SMS centre for reply Set the SMS center number which receivers used to reply messages to the same one as the sender SMS Bearer Domain The bearer field that is used to send messages e Circuit Switched CS messages are sent through the CS domain e Packet Switched PS messages are sent through the PS domain Validity Select the valid period during which messages can be stored in the SMS center SMC Number Note The number of the current SMS centre is supposed to be included in the SIM card this information will automatically fill up as soon as the SIM card is loaded If no such information or it has been accidentally deleted contact your provider to get this number If no storage space is available in your SIM ca
18. d volume statistic values and the duration of the connection Last Reset Time recording the time when you execute the reset operation for the last time Click lt Reset gt and you can clear the last volume statistic information and the total volume statistic information nw Call Service When you request the call service you need to insert the earphone to the jack on the E600 Note You can use the control key on the earphone to answer or reject a coming call conveniently when the ring for a coming call sounds press the control key to answer the call or press and hold the key to reject it Make Calls The E600 provides many easy and quick ways to make calls By Directly Entering a Telephone Number You may make a call by entering directly a telephone number Step Operation and description 1 Click on E or select Tools gt Call the Call service screen is displayed 2 Enter a telephone number by one of the following ways Enter the number directly with the keyboard of your computer Click the telephone keypads on the Call screen mpm Click on Se to make a call ea Click on to end a call 9 Call Service Note You can remove the number on the call screen digit by digit by pressing the CLR key Pressing and holding it can remove the whole number n You can also press the backspace key of your computer to do this By Selecting a Telephone Number from the Contacts List Yo
19. es 29 Text Message Import Management eceessecsseceseceeeceeseceeeeeeeeeeneeenaeeeee 38 SMS Settings cccesceccevegeaiesssag decked cs bescidas e dasa secetecd sadbecaveat deceased cncsbecede 38 MiManaging Your Contacts ee ereis ieii EE E E 41 Managing the Items in the Contacts cccecesseeseesscesecneeeseeeeceseeeeeseneenees 41 Importing Exporting Contacts 0 0 cceseeecseeeecreeseeeeseceeesesecaeeecnevseeneaees 44 DEC AMMRE GIS tS tiseecncee eters ceeeeccac eee eae E 47 Missed Calls i e ssnesssvessssesaseesdescssesostadesssaaseasivesssteidesvsessenssesteiyiessedesadeassbeevaae 47 Received Callsis ic cccivssessssestes shesestetansvsass ins a a EEEE 49 Dialed Callino iia a AEE E EE 50 lBSetinesand normati oni Query a SS Choosing Network siirsi i esnai ae i EE EATE EAE S 53 Choosing Connection Type cccceccesessseescesecsseeseeseeeceaecaeeeseeeceaeeeeeeeeaees 53 Managing the PIN Code sssssesssssssesssssesesssseserstsereessesteesssseserstssesersessese 53 System Setn OS ra A AAE A EA O SR 55 IDEENE TON A OAA EAEE A EE AE 57 AshechnicGalsParameters arn a A AA A E A AA A A see ehet onan 59 AOON O OD O a NE S 6l 16 WarningsandiBrecautions o A E eee EA e A 63 Electronic DEVICE resar raar A EAER EAREN 63 Hospital eaer aoei aeoea i EEE A AAEE AEE EA Ra 63 ii HUAWEI Contents Frattic Safety s22 een SES Ae EA Rs 63 Operating Environment cccccccesceseeseesecesecesecseeeeceseceeeseeeceaecaeeseeeeease 64
20. escription 1 Select one or more items 2 Click lt Delete gt If you are sure click lt OK gt 13 TAS 12 Call Register Received Calls Click lt Received calls gt and the Received calls screen is displayed Sending Text Messages You can send messages to the numbers in the Received calls items Step Operation and description 1 Select one or more items 2 Click lt Send gt and the E600 automatically retrieves the numbers in the items you select and the Write SMS screen is displayed 3 The numbers retrieved automatically are displayed in the blank column behind the Contacts Input the content for the message and click lt Send gt Making Calls You can dial out a number in a Received calls item Step Operation and description 1 Select an item 2 Click lt Call gt 3 The Call service screen is displayed and the number you have selected appears automatically in the screen and at the same time the number will be dialed out automatically Saving Numbers You can save numbers in the Received calls items P 49 12 Call Register Step Operation and description 1 Select an item 2 Click lt Get Number gt 3 The New contacts screen is displayed By default the E600 will save the number of this item to the Mobile column in the contacts You can change the number if you think that this number is not the one you want to save to the Mobile column 4 Click lt Save gt Removing Items You
21. ftware version of the E600 Hardware Version the hardware version of the E600 ave 1 4 Technical Parameters Item Description PC Card Type Type II 68 Pin CARDBUS Radio System GSM GPRS 900MHz 1800MHz WCDMA 2100MHz Radio Frequency band GSM GPRS 880MHz 915MHz Uplink 925MHz 960MHz Downlink GSM GPRS 1710MHz 1785MHz Uplink 1805MHz 1880MHz Downlink WCDMA 1920MHz 1980 MHz Uplink 2110MHz 2170MHz Downlink Radio power output GSM GPRS 900M Power class 4 33dBm GSM GPRS 1800M Power class 1 30dBm WCDMA Power class 3 24dBm Services Voice GSM WCDMA Data GPRS Class 10 Type B WCDMA PS 384kbps Downlink 128kbps Uplink SMS GSM GPRS WCDMA Concurrent WCDMA support Voice and PS Data service concurrent Size D W H 120 mm 54 mm 10 mm Weight 50g Battery Powered via the PC card slot uses laptop battery Operating 0 C 55 C temperature Storage temperature 20 C 70 C P 59 1 5 FAQ on E600 Data Card How to Judge Whether the E600 Data Card has been Installed Correctly After installing the E600 Data Card two devices are displayed in the device manager namely the HUAWEI Mobile Connect 3G Modem and the HUAWEI Mobile Conncet 3G Application Interface Check whether these two devices are installed correctly at first If a yellow exclamatory mark or other signs appear in front of the devices it means that the data card has not been installed co
22. iption 1 Select one or more items from the contacts 2 Click lt Send gt and then the E600 automatically picks up the numbers in the Mobile columns of the items you just select from the contacts and the Write SMS screen is displayed 3 The mobile numbers retrieved appear in the blank column behind the Contacts Input the content for the message and click lt Send gt ZY HUAWEI 11 Managing Your Contacts Making Calls You can dial out the number you have selected from the contacts The procedure is as follows Step Operation and description 1 Select the item that contains the number you want to dial from the contacts click lt Call gt 2 Ifthe item you have selected contains only one telephone number the Call service screen will be displayed automatically If two or more telephone numbers are contained in the item you select the Select Phone Number window is displayed and you are prompted to select one number After doing that click lt OK gt and the Call service screen is displayed 3 The number you have selected appears on the Call service screen automatically and at the same time the number will be dialed out automatically Searching for Items in the Contacts The E600 provides the function of searching for wanted items in the Contacts Step Operation and description 1 Click lt Find gt 2 e Select a field item such as Name Mobile Family Office or E mail from the pulldown list in the C
23. l D ee all The shortcut key for 5 trl H e e The shortcut key for ad Ctrl M The shortcut key for mute by which you can switch between the mute and normal modes Ctrl The shortcut key for volume adjustment P 27 1 0 Messaging Sending and Receiving Text Messages Writing New Text Messages Click or select Tools gt SMS the SMS screen is displayed Step Operation and description 1 Click on lt Write gt the Write screen is displayed 2 Enter a telephone number by one of the following ways Way 1 to select a number from the Contacts list Click lt Contacts gt select one contact and click lt OK gt the number of this contact recorded on the Mobile column in the Contacts will be selected Way 2 to enter a number directly In the blank field behind the Contacts enter numbers directly With the E600 you can send a message to several contacts in one time To do so if you adopt way 1 you can press lt Shift gt key to select a sequence of contacts or press lt Ctrl gt to select them one by one if you adopt way 2 you can use semicolons as the separator between the numbers Note The E600 supports to send text messages in groups of up to 20 numbers e You can directly input the numbers or select them from the Contacts 10 Messaging Step Operation and description 3 Input the text message The maximum length of each text message is 1000 characters 4 Click lt Send gt to send the
24. lick lt Get Number gt 2 The new contacts screen is displayed and the sender number of this message appears automatically in the blank field behind Mobile Number 3 Input the information for this number as required 4 Click lt Save gt Outbox The text messages you have sent out are saved in the Outbox Up to 1000 messages can be stored in this box When the Outbox is full and an additional message is coming the earliest message in the Outbox will be moved to the trash automatically Access the SMS screen click lt Outbox gt and the Outbox is displayed Viewing Text Messages in the Outbox You may go to the Outbox to check and view messages P E 10 Messaging Step Operation and description 1 You may browse all the messages in the Outbox 2 Double click a message to view the detailed contents Sending Text Messages In the Outbox you can send a new message to the receivers you have already sent a message to Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and click lt Send gt e You can also send messages in groups To do so select several messages and click lt Send gt 2 The telephone numbers of the receivers whom the message was sent to are displayed automatically in the blank column behind the Contacts You can change these numbers 3 Input the content for the new message 4 Click lt Send gt to send the new message
25. me of the current data connection nwo EE 6 Descriptions of the E600 Manager GUI When the screen is maximized Status Description information Signal strength Indicates the current network type and the signal strength Information is described as below e 3G 3G network in which both voice and data services can be used at present e 3G CS 3G network in which only voice services can be used at present e 3G PS 3G network in which only data services can be used at present GSM 2G network in which only voice services can be used at present e GPRS 2G network in which both voice and data services can be used at present Network Displays the information about the network operator Connection Includes The duration of the current connection The data volume of the current connection The volume rate and the top rate of the current sending and received data Missed calls Displays the number of missed calls in real time New text messages Displays the number of new text messages in real time New text message Displays the number of new text message reports in reports real time 16 Sa Menu 1 File 1 1 Connect Disconnect 1 2 Import Contacts 1 2 1 From File 1 2 2 From SIM Card 1 3 Export Contacts 1 3 1 To File 1 3 2 To SIM Card 1 4 Import Message from SIM Card 1 5 Exit 2 Tools 2 1 Open Browser 2 2 Call 2 3 SMS 2 4 Contacts 2 5 Call Register 2 6 Volume Statistic 2 7 Diagnostic
26. n change it 3 Input the content for the message you want to reply 4 Click lt Send gt to reply Forwarding Messages You can forward messages received in the Inbox Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and click lt Forward gt 2 Input the telephone number you want to forward to or click lt Contacts gt to select the number 3 The content of the message you want to forward appears automatically in the text box You can edit or modify it 4 Click lt Send gt to forward the message Making Calls You can playback the number of a message sender Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and click lt Call gt 2 The call service screen is displayed the number of the sender appears and it is dialed out automatically at the same time 32 TIE 10 Messaging Deleting Messages You can remove the messages you have received Step Operation and description 1 e Select one or more messages and click lt Delete gt e Double click a message to go to the screen with the detailed message and click lt Delete gt 2 The messages are removed to the trash Saving Numbers You can save the sender s numbers of the received messages to your contacts Step Operation and description 1 Select a message or double click it to go to the screen with the detailed message and c
27. o the Main Screen Main Screen Overview The initial screen after the E600 manager starts is as follows BR HUAWEI E600 Data Card File Tools Settings Help Network No Network File Tools Settings Help Ou 03 10 2005 17 54 47 E600 Data Card Rate Top rate Missed calls New messages New SMS reports Shortcut Icons and Keys The list below describes the Shortcut icons and keys provided by the E600 Manager 4 NE Shortcut icon key go 9 2 eel eer 6 Descriptions of the E600 Manager GUI Description Connect Disconnect the network Start the default Internet browser in your operating system Access the Call service screen Access the SMS screen Access the Contacts service screen Access the Call Register service screen Access the online help Status Information on the Screen The status information shown on the screen depends on the service that is going on All the status information that may appear and their descriptions are listed below When the screen is being initialized and in minimized status Status information Description Signal strength Network Duration of this connection Volume of this connection Displays the current signal strength The more the vertical bars the stronger the signal is Information about the current operator Displays the duration of the current data connection Displays the volu
28. ode and the new PIN code and then enter the new code again to confirm it 3 Click lt OK gt to modify it PIN Code Validation After accessing the program of data card management you can still use the function of validating the PIN code Step Operation and description 1 Select Settings gt PIN Code Protection 2 Selecting Validate you can access the PIN code validation flow which is the same as that when the E600 manager starts For more information please refer to the descriptions on page 13 PIN Code Protection You can enable disable the PIN function If the function is enabled you must enter a PIN code when the E600 starts up Otherwise you need not do this Step Operation and description 1 Select Settings gt PIN Code Protection 54 TIE 13 Settings and Information Query Step Operation and description 2 Select Enable or Disable After that you should enter the PIN code according to the prompt Enable You must enter the PIN code when the E600 starts up e Disable You need not enter the PIN code when the E600 starts up System Settings The system settings include the startup mode of the E600 manager the alert mode for incoming calls the alert mode for text messages and the standby hibernate mode for the computer and so on Select Settings gt Options Startup Settings Selecting the Startup tab you can set the E600 manager to start along with the Windows to be displaye
29. ome changes 4 Click lt Save gt Accessing the Internet You can access the Internet through establishing a 3G or GPRS connection Step Operation and description 1 Select Settings gt Network Connection Settings choose a profile you want and click lt OK gt 2 ga Click on to establish a 3G or GPRS connection 3 After a prompt appears indicating that the connection is set up click B on or start the Explorer on your machine and then you can access the Internet 4 9 0 Click on a to disconnect the connection Once the connection is established the following detailed information about the network connection is displayed on the main screen The duration of the current connection e The data volume of the current connection The volume rate and the top rate of the current sending and received data 20 SE 8 Internet Service Note E600 supports concurrent service of data service and voice service in 3G network For more information please ask for service provider Volume Statistic You can view the content of the volume statistic Select Tools gt Volume Statistic on the menu bar Last Volume Statistic volume information for the last connection with the Internet including sent and received volume statistic values and the duration of the connection Total Volume Statistic information about the total volume of all connections since the last reset operation you made including sent and receive
30. ondition area Enter relevant searching terms in the Value text box e Choose Whole word only and or Case sensitive for Matching Type 3 Click lt Next gt or lt Prev gt to begin searching nwo EE 11 Managing Your Contacts Importing Exporting Contacts Importing Contacts The E600 allows you to import the contacts items from the SIM card or a file in a specified format to the E600 contacts Importing Items in Files of Specified Formats to the E600 Contacts The file formats that the E600 supports for importing are txt and csv Step Operation and description 1 Select File gt Import Contacts gt From File 2 From the Open window select a file you want to import 3 Click lt Open gt and the items in the file are imported to the E600 contacts automatically Importing Contacts Items from the SIM Card to the E600 Contacts You can import the contacts items from the SIM card to the E600 contacts The procedure is as follows Step Operation and description 1 Select File gt Import Contacts gt From SIM Card 2 Choose one method e Move Import Original contacts items in the SIM card will be deleted e Copy Import Original contacts items in the SIM card will remain unchanged Click lt OK gt and then select the columns in the contacts the item information will be imported to such as Mobile Family or Office and select whether you want to proceed always in this way Click lt OK gt to procee
31. r to System Settings When you have any missed calls the amount of your current missed calls is displayed in real time under the status information on the main screen With the Setting of Sound Alert When there is an incoming call you will hear a sound alert Step Action 1 g gt Click on or select Tools gt Call the Call service screen is displayed Click on Se to answer a call 3 2 Click on J to end a call pne E 9 Call Service With the Setting of Display Alert An alert window is displayed when a call comes You can choose to Option Description Click lt Answer gt Answer the call Click lt Reject gt Reject the call Volume Adjustment and Mute Click on or select Tools gt Call the Call service screen is displayed You can adjust the volume no matter when you are making a call or not You can also mute your voice so that the person you are talking to cannot hear you even though the line is still active To increase the volume press t e To decrease the volume press To mute your voice press To resume normal talk press J Shortcut Keys for Call Service The following table shows the shortcut keys and their usage description 25 TINE 9 Call Service Shortcut Description keys Enter After entering a call number press this key to make the call directly e Press this key to receive an incoming call Ctrl B The shortcut key for E2 tr
32. rd for the reports the Request status report option is invalid please contact your card provider for details AP o 1 1 Managing Your Contacts The E600 supports up to 1000 items in the contacts You can create modify and delete items in the contacts You can also send messages make calls with the contacts The E600 also supports the import export of the contacts for your convenience to manage the contacts Managing the Items in the Contacts EF Click rom or select Tools gt Contacts and the contacts management screen is displayed Creating New Items in the Contacts Procedure Step Operation and description 1 Click lt New gt 2 Fill in the Name Mobile Number Family Phone Number Office Phone number E mail addresses and or the Other information 3 Click lt Save gt to save a new item in the contacts Modifying Items in the Contacts Procedure 11 Managing Your Contacts Step Operation and description 1 Select the item to be modified from the contacts double click on this contact or click lt Edit gt 2 Make some changes 3 Click lt Save gt Removing Items from the Contacts Procedure Step Operation and description 1 Select one or more items to be removed from the contacts click lt Delete gt 2 If sure click lt OK gt Sending Text Messages The E600 allows you to select numbers from the contacts and send messages The procedure is as follows Step Operation and descr
33. rrectly and you need to retry After Installing the E600 Management Software the System Always Prompts Data Card not Exist Why Probably you have inserted the data card before the completion of installing the E600 management software Pull out the data card and insert it after the installation of E600 management software is completed Then install the E600 hardware driver by following the guide for hardware installation What Shall Do if cannot Access the Internet 1 Check whether you have activated the wireless online service at first You can ask the local network operator on how to activate it 2 Ifyou affirm that the wireless online service has been activated refer to the section of Internet Service to implement relevant settings Only Part of the Message is Displayed After Use the Paste Function to Edit it Why While editing the message at most 1000 characters are supported in the text If the quantity of the pasted information exceeds the limitation the exceeding part will be deleted automatically When a Message is received no Prompting Window Appears Why Because you have not set the function of Display alerts when a message is awe e 15 FAQ on E600 Data Card received Select Settings gt Options and then select the Prompt tab and check the Display alerts when a message is received from the Message alerts settings After the E600 Management Program is Started
34. s 3 Settings 3 1 Choose network AP r 7 Menu 3 1 1 Auto 3 1 2 Manual 3 2 Choose connection type 3 2 1 GPRS Preferred 3 2 2 3G Preferred 3 2 3 GPRS Only 3 2 4 3G Only 3 3 Modify PIN code 3 4 PIN Code Protection 3 4 1 Validate 3 4 2 Enable 3 4 3 Disable 3 5 Options 3 6 SMS Settings 3 7 Network Connection Settings 4 Help 4 1 Help Topics 4 2 HUAWEI Online Support 4 3 About 18 D Internet Service Network Connection Settings Create a Profile Select Settings gt Network Connection Settings on the menu bar Step Operation and description 1 Click lt New gt 2 Enter a new profile name in the Profile name field 3 Enter required information for the setting items of APN IP Authentification DNS WINS and Authentication protocol 4 Click lt Save gt to finish creating the new profile Note For the parameters required to be set and their values contact your network operator Deleting a Profile Select Settings gt Network Connection Settings on the menu bar Step Operation and description 1 From the Choose Profile Name field select a profile you want to delete 2 Click lt Remove gt To confirm the removing click lt OK gt EP 19 8 Internet Service Modifying a Profile Select Settings gt Network Connection Settings on the menu bar Step Operation and description 1 From the Choose Profile Name field select a profile you want to modify 2 Click lt Modify gt Make s
35. s device off in aircraft The radio signal from it may cause interference to control signals of the aircraft HiB D ts Switch your wireless device off near high precision electronic devices It may affect the performance of these devices Do not attempt to disassemble your wireless device or its accessories Only qualified personnel may service or repair the wireless device Do not place your wireless device and its accessories in containers with strong electromagnetic field Do not place magnetic storage media near your wireless device Radiation from the wireless device may erase the information stored on them Do not put your wireless device in a high temperature place or use it in a place with flammable gas such as a gas station Keep your wireless device and its accessories away from children Do not allow children to use your wireless device without guidance Observe any laws or regulations on the use of wireless device Respect others privacy and legal rights when using your wireless device e e o N Contents OVERVIEWS ern E EA norten regen RET Nee Sete eset ARA 1 2 What s in Youn Racking BOX oere cerceccarecsse csscsecccscsseescsereecteanccneestcescrateenectenens 3 BIGeEttin gto Know Your E600 Mee eeann ee eaa eeaeee Erea e E AEn E EEAS a Eo Aeee n EO EEE CAREER ETE 5 4 Getting Started eeaeee E aE A 7 Computer Configuration Requirements ccccceesceseesseesceeece
36. seeeeeeeeeeeenneens 7 Preparinig the E600 3 co cc ccsccedcovesssescdescsecescovsaceteandeschenedeacdecestesecesedebecstcunsess 7 SUnstalllanoniGuidew sauces eoese earn teneenemeen Hameo meee 9 Installing the E600 Manager ececccssesseeesceeceseeseeeceseceaeeseeseeeaeeneeaeeneees 9 Installing the E600 Hardware Driver 00 cc eeeeesesceeeeceeeeceseeeceereeeneeaees 10 Removing the E600 enine ereer easar EE EE E EA 10 Uninstalling the E600 Manager ccc eceseecseeseseceseeeceereceeeseseesaeseeeeeees 11 6 Descriptions of the E600 Manager CO 13 Accessing the E600 Manager GUI ee eeeseeseseceseeecneeeeeneeseteesaeeeeneeaes 13 Introduction to the Main Screen sceseecseeeecseeseeeceseeeceeseeseeecseveeeneeaees 14 WAIVE oe E E E AEA a sor cantvaneec ame tra E ES 17 SHIMEIMEE SCR CER cress on seros E R ees E A ee ee R 19 Network Connection Settings cccccccesccssecseessceseceseeseeseeeecesecseeeseeeeeeaeenee 19 Accessing the Internetaren oaeo i eaa AEE TEO a 20 Vol me Statisti Croen ds csciscssstes Caister E EN E AAA E AAR EARNE 21 CASEI E R ee T Make Calls Contents Ariswering Galenco ene Bee EN i 25 Volume Adjustment and Mute ccecceecceseessesscesecesecseeeeceeceseceeeseeeeeaeenee 26 Shortcut Keys for Call Service eececcesesssesscesecseeeeeeseceaecseeeseeseeeeeseeneees 26 DUO SSSR 0a Sry ese cc ee a Le Se eS E oe oC NSO aE nC 29 Sending and Receiving Text Messages ccccescesseescesecetecseesseeseeeeceseenee
37. t Tools gt Call Register the Call Register screen is displayed Missed Calls Click lt Missed calls gt and the Missed Calls screen is displayed Sending Text Messages You can send messages to the numbers in the Missed calls items Step Operation and description 1 Select one or more items 2 Click lt Send gt and then the E600 automatically retrieves the numbers in the items you select and the Write SMS screen is displayed 3 The numbers retrieved automatically are displayed in the blank column behind the Contacts Input the content for the message and click lt Send gt Making Calls You can dial out a number in a Missed calls item 12 Call Register Step Operation and description 1 Select an item 2 Click lt Call gt 3 The Call service screen is displayed and the number you have selected appears automatically in the screen and at the same time the number will be dialed out automatically Saving Numbers You can save numbers in the Missed calls items Step Operation and description 1 Select an item 2 Click lt Get Number gt 3 The New contacts screen is displayed By default the E600 will save the number of this selected item to the Mobile column in the contacts You can change the number if you think that this number is not the one you want to save to the Mobile column 4 Click lt Save gt Removing Items You can remove items from the Missed calls Step Operation and d
38. t the E600 0 Soa 5 Installation Guide Uninstalling the E600 Manager You can uninstall the E600 Manager through the Add Remove function of Windows anv gi Descriptions of the E600 Manager GUI Accessing the E600 Manager GUI 1 To start the program double click the shortcut icon ned of the E600 Manager on the desktop 2 Ifyou are prompted to enter the PIN Personal Identification Number code please enter a correct one and click lt OK gt You can try three times to enter your PIN If you failed to do that after three times your SIM card would be locked If this happens use the PUK PIN Unblocking Key code to unlock it You can try 10 times to enter your PUK code If you failed to do that after 10 times your SIM card would not operate If this happens please contact your operator When you failed to enter the PIN code or the PUK code you can click lt Cancel gt to cancel the operation of this validation Then the functions related to the SIM card such as connecting to the Internet making and answering calls sending and receiving text messages and reading the messages recorded in the SIM card will be unavailable for you However you can still make emergency calls The PIN code and the PUK code are provided by your network operator For information about how to modify and enable disable your PIN code please refer to Managing the PIN Code P 13 6 Descriptions of the E600 Manager GUI Introduction t
39. the Inbox and browse double click a message to view the detailed contents There are two types of icons in the Inbox amp Standing for unread messages 8 Standing for read messages 2 View Text Messages When New Messages Come According to the settings you have made on Settings gt Options you can be alerted by a new text message in different ways You can select Sound alert and Display alert for specific operations refer to System Settings e With sound alert being set When a new message is coming you can hear the sound alert Step Operation and description 1 Click on pam or select Tools gt SMS the SMS screen is displayed 2 Click on lt Inbox gt to go to the Inbox and check new messages double click a message to view the detailed contents With display alert being set When a new message is coming you can see the alert window Option Operation and description Click lt View gt on The content of the message is displayed the alert window Click lt Close gt on The content of the message is not displayed the alert window nw dE 10 Messaging Replying Messages You can reply to the sender directly in the Inbox Step Operation and description 1 Select a text message or double click it to go to the screen with the detailed message and click lt Reply gt 2 The telephone number of the original sender appears automatically in the blank field behind the Contacts and you ca
40. u may make a call by selecting a telephone number from the Contacts list Step Operation and description 1 5 2 Click on cf displayed or select Tools gt Call the Call service screen is 2 Click on 224 and the Contacts list is displayed Double click a contact or select a contact and then click lt Call gt Ifthe selected contact has only one number the number will appear on the call screen and be dialed out directly e Ifthe contact has two or more numbers double click on this intended number from the pop up Select Phone Number window or click lt OK gt after selecting the number and the selected number will appear on the call screen and be dialed out directly PD Click on FJ to end the call By Selecting a Recently Dialed Number You may make a call by selecting one from the recently dialed numbers Step Operation and description 1 ap Click on B displayed or select Tools gt Call the Call service screen is 24 TE 9 Call Service Click on to display a list of 10 recently dialed numbers Double click the intended telephone number or click lt Call gt after selecting the number then the number will be dialed out directly Zp Click on is to end the call Answering Calls The default alert mode of the E600 for incoming calls is by sound You can select Settings gt Options to set the mode You can select the sound alert and the display alert For specific operations refe
Download Pdf Manuals
Related Search