Home

User's Manual

1. Press the STANDBY button and make sure that the ring in the front panel is blue e Make sure that the AV HDMI or component cable is firmly connected to the TV e Make sure that the antenna cable is properly connected to the product e Be sure to activate channel search e Check the brightness level of the TV e Check if the channel is currently on air e Make sure that STB or PVR is selected as input on the remote control 3 Poor picture sound quality e Make sure there is no mobile phone or microwave oven near the product Keep the power cable and the RF cable apart from each other Terrestrial Adjust the antenna direction to get a better picture Terrestrial If active antenna is being used and 5V antenna power is needed go to MENU gt Settings gt Installation gt Antenna Power and set 5V Antenna Power to On Note If the antenna is covered with snow or the RF is weakened by heavy rain the condition of the sound and picture may temporarily be poor However poor sound and picture quality due to weather conditions cannot be accepted as a malfunction of product No or poor sound e Check that your AV HDMI or component cable is connected correctly e Check the volume levels of your product and TV e Check if the product or TV is on mute e Check the audio type or soundtrack option where applicable Remote control does not operate e To control the product the top end of the remote control should point direct
2. Press the OK button to set reminders or recordings for future programmes OPT Q Viewing Programme information of other channels Press the A button while the i plate is displayed Press the OK button to change to the selected channel Searching related contents Press the OPT button while the i plate is displayed This option is supported only when the network is connected AU8 Managing Channels Channel List You can access the channel list in several ways Press the OK button Press the MENU button and select Channel List Changing Channels Select the channel you want to watch and press the OK button The channel will change Radio Favourite1 Favourite2 Favourite3 Favourite4 b DISCOVERY GES HIT24 HOR FS HH SEASONS DFdokukan TAQUILLA 10 CINEMANIA CINEMANIA 2 MTV Base MTY Deutschland E Sort Loumselia Note i Locked channel Press the i button to view the detailed channel information Press the OK or EXIT button to exit Press the TV RADIO button to switch between TV and Radio groups Editing Channels in Channel List Select a channel you want to edit and press the GREEN button Setting Favourite Channels Select a favourite group you want to move the channel to and Favourite press the OK button To remove a channel from a favourite group select the group and press the OK button again Locking Channels Changing Group Press the gt button to dis
3. Whatever Will BeBe Select the folder you want to move the files to and press La Vie en Rose i the OK button gt Copying the files to another storage ae a eee Select the storage and then select the folder to copy the i files to Video file Function buttons Playing file Copy dew tecondediie Coloured or OPTA burton Recording file When you move a locked file you will be prompted to enter the password The Copyright Act 1968 only permits to copy broadcasts for Private and Domestic purposes in limited circumstances HUMAX does not authorise any use of this feature in any way which may amount to a breach of any law or the rights of the owner of copyright in film or broadcast Note Recording icon Playing icon i HD icon f Lock icon Press the YELLOW button to switch the media type Press the BLUE button to switch the storage Press the i button to view the detailed programme information Renaming Files Playing Files Rename Enter the name of the file in the keyboard and press the Select a file and press the OK button and choose Resume play or Play from YELLOW button the start Creating New Folder To play multiple files successively select the files using the RED button and New Folder Enter the name of new folder in the keyboard and press the press the OK or PLAY button YELLOW button You can perform rewind fast forward and pause while playing back a recorded file Refer to Recording and Playback gt Playback fo
4. 214 LG 102 006 144 145 138 061 064 248 281 354 367 368 384 396 416 417 425 426 215 209 067 047 035 034 027 023 002 001 236 257 Mitsubishi 102 006 204 005 019 014 015 027 093 096 191 311 Mivar 034 035 047 048 094 112 NEC 005 002 003 025 035 040 049 066 140 239 379 Nokia 098 113 111 061 023 033 049 053 055 056 066 083 084 089 122 Nordmende 006 144 103 030 020 046 054 242 280 499 Onida 207 226 Orion 102 006 144 204 467 458 457 456 448 445 443 385 218 195 131 097 094 077 071 059 050 049 003 Orline 006 036 Ormond 134 204 Orsowe 094 Pacific 102 144 204 208 077 256 Packard Bell 254 293 Panasonic 006 098 061 129 038 023 063 094 187 251 294 353 359 279 306 Panavision 006 070 Philco 006 064 014 021 072 AU38 Appendix Philips 102 006 061 459 435 429 395 310 302 Technika 422 428 465 468 480 493 Sharp 015 A 125 110 101 073 066 054 029 TechniSat 102 131 237 Thomson 120 Technisson 144 242 361 United 445 Phonola 102 006 014 029 034 Technosonic 102 120 091 195 256 258 436 437 TV VCR DVD Combo Pioneer 006 086 061 064 020 023 024 046 073 ae tee 093 136 159 233
5. AU14 Scheduled Recording You can easily set recording reservations in TV Guide Schedule or i plate navigation mode 07 18 TUE 12 MAR 2013 a T 5 erikugg Hmm ih Det GHhelmmis de Aralsees Yon Nachtoulen und Frthaufstehern Receiving inionpatar Weal Doku Ereg Halten Sim mittoi Heii rgt E Schedule Group 24hrs WE 24hrs Select a future programme and press the OK button in TV Guide Select New Reservation and press the OK button in Schedule Press the OK button on a future programme in i plate and select Record The recording will start at the scheduled time and the record banner will display for a few seconds Press the STOP button to stop recording Note Press the GUIDE button to go to TV Guide Press the GUIDE button and press YELLOW button to go to Schedule Press the i button while watching a programme to display the i plate Fditing Recording Schedule You can edit or delete your reservations in Schedule To edit select a reservation and press the OK button You can change the options such as channel date start time end time repeat and mode To delete select a reservation and press the BLUE button Recording amp Playback Recording Conflict Recording Duration Conflict When an instant recording conflicts with one of the scheduled recordings or reminder you can either Adjust the recording duration Cancel one of the previously set rrecordings to reserve the ins
6. Logik 204 001 003 029 162 195 224 292 376 464 465 466 Logix 134 095 Luxor 098 204 061 023 033 035 047 055 056 060 083 084 122 211 Manhattan 006 134 204 164 192 237 293 Marantz 102 006 071 140 277 317 Bang amp Olufsen 014 Beko 006 144 086 145 111 064 072 172 361 405 Marks and Spencer 420 Matsui 102 006 144 030 204 087 005 080 074 153 195 097 094 369 445 077 447 065 059 056 052 044 035 033 028 011 008 004 003 002 Fujitsu General BenQ 223 328 329 Black Diamond 444 204 211 Brionvega 006 014 062 Bush 102 006 144 134 204 138 087 061 043 036 005 108 376 373 370 361 355 352 327 388 430 431 432 440 448 451 473 476 477 478 002 033 035 044 045 056 059 065 066 095 133 164 210 213 229 232 250 cello 397 410 418 419 420 Crown 006 144 134 204 086 145 087 111 143 064 361 135 072 071 053 033 002 Daewoo 102 006 124 444 036 441 406 341 338 271 249 195 192 190 164 133 119 091 079 066 035 034 002 Dell 235 278 DMTech 260 438 449 454 456 Ferguson 006 120 098 103 030 204 012 020 029 046 052 054 077 292 447 476 Finlux 102 006 144 145 333 327 172 122 118 094 089 084 083 070 055 035 023 018 017 014 011 010 Fuji
7. Renaming Favourite Groups Press the YELLOW button and select the favourite group you want to edit Press the OPT button Select Rename Favourite YELLOW Enter the name in the keyboard Changing Background C You can change the channel displayed in the background BLUE while editing Select the channel you want to watch and the press the BLUE button The background channel will change Selecting Releasing All Channels AU11 TV Guide TV Guide You can access the TV guide in several ways GUIDE Press the GUIDE button e Press the MENU button and select TV Guide Information of the selected programme Current number amp name programme name Current time simple information favourite group and icons and date Seasons magazine Le garage de Seasons Silberiligel Timm Th Das Geheimnis des Aralsees Roots Germania Von Nachteulen und Fruhautstehem Recnivirig nformation Naas Doku Krieg N24 Nachric Heute ist Halten Sie bitte Function buttons Coloured button Time bar Note Press the i button to view the detailed programme information Scheduled programme Red Record Blue Reminder Recording programme Present time W Series recording AU12 Watching Programmes 1 Select a programme and press the OK button The programme will display in the preview 2 Press the OK button again to exit the TV guide and watch the programme Setting Reminders or Recordings 1 Select a f
8. rewind or fast forward within the programme You can fast rewind back to the start point If you reach the start point while rewinding the programme automatically plays at normal speed To fast forward and skip scenes Press the gt gt button You can fast forward only when there is a time gap between the current watching point and the live broadcasting point caused by pause or rewind You can fast forward up to the current broadcasting point If you reach the live broadcasting point while fast forwarding the programme automatically plays at normal speed To record the Time Shift Recording buffer Rewind to the point you wish to record by pressing the lt lt REWIND or lt button and press the RECORD button on the remote control Note The recording will not appear immediately in the Media list as time is required to transfer the buffer into a recording AU17 Media List Media List You can play video music or photo files from the hard disk drive ves the USB storage devices or home network devices You can access the media list in several ways Press the MEDIA button Press the MENU button and select Video Music or Photo Connect a USB storage device and select the media type Switching Media 1 Press the YELLOW button 2 Select the media type and press the OK button e Video Music Photo Switching Storage 1 Press the BLUE button 2 Select the storage and press the OK e button i a HDD Displ
9. accessing TV Portal 20 Setting the padding time Go to MENU gt Settings gt Preferences gt Recording and set Start End Padding Time Appendix 21 Using HUMAX products that are purchased overseas in Australia e HUMAX products that are not purchased in Australia will not be usable in Australia and customer service will not be provided either 22 The product powers off automatically Go to MENU gt Settings gt Power Management and see if Automatic Power Down is On If there is no input for 3 hours the product powers off automatically to save energy e Check if Power Off Timer is On in MENU gt Settings gt Preferences gt Time 23 Changing to passive mode Go to MENU gt Settings gt Power Management and set Power Saving in Standby to On 24 Deleting an upper folder e Upper folder is not a folder or a file that you can delete It is there to be used as a Back function HUMAX Australia Customer Support Information concerning troubleshooting software upgrade and product Support is provided in the following website Should your product require warranty service please contact Humax Australia Customer Service Tel 1300 737 937 Opening Hours Mon Fri 9 00 17 00 excluding Public Holidays Address 7 602 Whitehorse Road Mitcham Vic 3132 Australia l E mail ausupport humaxdigital com Website www humaxdigital com au Language English AU35 Appendix Error Messages Error messages No or bad signal Terrestri
10. audio system for digital audio Connecting your TV directly to the audio video output of the product will assure a more vivid picture and enhance your viewing enjoyment Connecting the Network 3 1 Connecting to the LAN 1 Use the Ethernet cable to connect the product and the LAN router 2 Set the options for the LAN Refer to System gt Internet Setting for details Note We recommend the network connection over a direct LAN Quick Start Guide 3 2 Connecting to the Wireless Network 1 Plug the HUMAX wireless USB dongle into rear USB port 2 Set the options for the wireless network Refer to System gt Internet Setting for details Note Make sure that the distance between the WLAN access point and the product is not too far away This may lower the quality of service Powering On 1 Connect the power cord of the product to a wall outlet 2 Ensure the ON OFF switch at the rear of the product is switched to ON 3 Power on by pressing the STANDBY button on the remote control or the STANDBY button on the front panel of the product Wizard The installation wizard operates automatically when you power on the product for the first time or do factory default in menu Note f you exit the installation wizard without fully completing the channel searching procedure you may not have all of the channels available In this case go to MENU gt Settings gt Installation and search for more channels 1 Region S
11. channels is updated daily at 4 00 a m except when there is Regular Update or when there is a scheduled recording between 4 5a m Requiar Software Upik Caution Please be careful to keep the power on and the power cord plugged in during software update If the power is off during software update fatal damage may be caused to the product Software update through the network is also possible if you access HUMAX TV Portal Note New software is downloaded and installed only when the network is connected via LAN It may take approximately 40 minutes to update software Other functions such as scheduling programmes will not activate while software update takes place If new software is detected you can choose either to download immediately or later If you select Later the message will be displayed again when you switch into standby mode You can also update the software by connecting a USB device which has the new software file The file can be downloaded from the HUMAX website Software Upgrade via USB Memory Stick 1 Visit HUMAX Australia website www humaxdigital com au and go to Support gt Software Download 2 Check the latest software version and click the title to commence download and save it to an EMPTY USB memory stick Make sure you have no other files 3 Power off the receiver by switching off the switch located on the rear 4 Insert the USB memory stick into the USB port located at the rear of the receiver 5 Power on the
12. dongle distributed by HUMAX Other products may not function or respond Go to www humaxdigital com au for details of where to buy If there is no internet connection visit the HUMAX website for the latest software versions http www humaxdigital com au or contact Humax Customer Support on 1300 737 937 AMEND gt Settings gt Installation gt Software Update Automatic Update Autoenatie Update ink Henua pje 1 Select Automatic Update and press the OK button to search for new software 2 When new software is detected select Yes to start the update process now Manual Update 1 Select Manual Update and press the OK button 2 Enter the options manually e Channel Select the channel Frequency Enter the frequency The corresponding frequency value will be automatically displayed Bandwidth Select the bandwidth 3 Select Search and press the OK button to search for new software 4 When new software is detected select Yes to start the update process now Please wait until the update is complete When completing the software update the product is automatically powered off and on again automatically powered off and on again AU27 Installation Regular Update You can set the software update to take place automatically at 4a m on a daily basis 1 Select Regular Update 2 Select an option e On Software is updated automatically at 4a m Off No automatic software update The EPG information for certain
13. receiver by switching on the switch located on the rear and immediately start tapping the front Standby touch button until the letter R appears on the front display 6 The front display will change to P and numbers will show indicating the progress You can also monitor the progress on the TV screen connected to the receiver 7 When the front display changes to END pull out the USB memory stick 8 To confirm successful update please go to Menu gt System gt System Information and check Software Version Note f the download progress stops around 89 it may take up to 5 minutes for it to restart DO NOT TURN OFF the receiver at this point AU28 Installation Dynamic Update AMEND gt Settings gt Installation gt Dynamic Update You can have the real time channel update take place automatically when necessary 1 Select Dynamic Channel Update 2 Select an option e On Channels are updated automatically when necessary Off No automatic channel update Antenna Power AW gt Settings gt Installation gt Antenna Power Active antenna is a portable or indoor antenna which needs power supply from the product because it does not have power cord for itself Connect an active antenna to the ANTENNA IN on the rear of the product The antenna power should be turned on if your TV is connected to an active antenna that requires external power 1 Select 5V Antenna Power 2 Select an option On 5V power is supplied from
14. the active antenna cable Off No power supplied Factory Default AMEND gt Settings gt Installation 1 Select Factory Default 2 A popup will appear Select Yes 3 You will be prompted to enter the password Enter the password Note The default password is 0000 If you have forgotten your password please contact HUMAX Australia Customer Service Warning Note that once you perform factory default all user configured data will be reset Shortly after you complete the factory default the installation wizard will appear automatically Dynamk harmel Upecd eter SY Antenna Power AU29 Cam we System System Channel List TV Guide Video Music Photo HUMAX TV Portal Preferences Edit Channels nstallation System Information Signal Detection Power Management Data Storage Internet Setting AU30 System Information You can view the system information Signal Detection You can check the signal strength and quality of the searched channels Note This menu is not activated during recording Power Management gt Power Saving in Standby Select On to inactivate certain functions and reduce the power consumption in standby to below 1W Passive Standby Mode gt Automatic Power Down Select On to enter standby mode automatically if no user interaction occurs for 3 hours Note A message will display 30 seconds before the product enters
15. the background while editing Select the channel you want to watch and press the YELLOW button Locking Unlocking Channels Selecting Releasing All Channels Managing Channels Editing Favourite List AEW gt Settings gt Edit Channels gt Password gt Edit Favourite List Edit Favourite List will help you add or remove channels from the favourite groups Group name Marked Total channels Favourite group name ab List 23 ABC 1 ABC NEWS 24 2 SBS HD a2 SBS Two Function buttons Coloured or OPT button Note e Press the TV RADIO button to switch between TV and Radio groups Press the MENU or EXIT button to exit Press the BACK button to return to the previous screen The channels that are automatically numbered by the broadcaster cannot be deleted or moved The default password is 0000 RED Adding Favourite Channels Select the channels to add using the amp and OK button in the left column and then press the RED button The added channels will be listed in the right column Removing Favourite Channels Select the channels to remove from the right column using the A V and OK button and then press the RED button L GREEN Changing Group To list the channels of other groups in the left column press the GREEN button and select a group you want Moving Favourite Channels Select the channels using the amp and OK button in the right column and then press the GREEN button L
16. the options you want using the A V lt 4 gt NUMERIC O 9 and OK buttons 4 Select OK to save and exit Note Press the i button to view the detailed programme information You can easily set reminders or recordings in TV Guide Find or i plate navigation mode AU13 Recording amp Playback Recording You can record programmes in the hard disk drive and playback the recorded programmes whenever you want Note Recording or copying is for private and domestic use only Instant Recording You can record the current programme instantly and change the recording duration Press the RECORD button to record the current programme instantly The recording will start from the current broadcast point and the record banner will display for a few seconds Press the STOP button to stop recording Start recording Inher ers 11 35 14 0 The recording will continue till the end of the current programme However if the programme ends within ten minutes it will continue until the end of the next programme When no programme information is provided the recording will continue for two hours Changing Recording Duration 1 Press the RECORD button while recording 2 Set the duration manually or select till the end of the current or next programme Select the recording duration by setting it manually or selecting another duration 13 20 120mins Tr tr 12 55 liWernationdl mews 13 30 Set Manually
17. 277 286 381 Grundig 448 Telefunken 006 120 144 103 086 320 202 105 090 an ve Pionier 086 064 327 082 055 054 052 046 020 016 012 348 Radiomarelli p05 CIs Tevion 102 006 144 134 204 208 468 405 If the code for your equipment is not listed visit the Relisys 190 192 193 194 220 221 271 310 333 403 376 355 327 298 246 242 232 230 following website and see MDB1 3 for a complete list of 338 341 355 390 172 128 Supported codes Saba 120 098 144 103 061 014 020 023 046 Thomson 006 120 103 020 046 052 054 056 ae oe eee global support 052 054 090 094 335 082 335 rcucodelist asp Sagem 113 080 182 253 337 Toshiba 030 204 005 115 129 092 447 364 313 Samsung 102 006 043 064 108 115 231 252 276 B08 282 212 AT Te 1835100 039 022 020 287 332 345 350 351 372 442 474 488 010 009 004 236 257 490 492 228 176 175 127 095 047 035 Tosumi 451 034 033 027 023 011 009 002 Vestel 006 134 204 035 211 333 370 Sanyo 204 064 005 019 442 370 363 358 Wideacen oo 357 356 222 200 150 140 097 053 048 035 034 033 025 023 017 011 008 003 Viewsonic 307 308 323 335 349 391 394 259 331 002 240 Wharfedale 102 006 095 189 256 327 370 452 453 Schaub Lorenz 098 144 086 111 061 056 066 215 477 502 256 267 Yamaha 169 314 330 184 Schneider 102 006 144 134 204 061 208 036 451 Zanussi 032 035 450 293 1
18. 28 097 095 065 056 054 042 areas 035 023 010 Aiwa 445 SEG 006 134 204 087 043 036 005 285 211 210 119 062 056 035 034 002 Amstrad 026 Sei Sinudyne 006 014 032 094 097 Beko 086 Seleco 023 032 042 055 062 065 070 075 099 Daewoo 444 119 Sharp 005 130 216 015 029 088 094 177 274 GoldStar 006 334 365 409 166 288 Grundig 102 006 030 101 445 Siemens 006 030 028 096 101 Irradio 147 SKY 006 195 271 300 307 308 340 341 342 LG 027 343 344 391 400 421 Philips io Ob Sonoko 006 043 002 035 045 ae a Sony 006 301 005 446 412 393 375 360 325 ae re 255 203 185 174 058 003 g 442 Strong Zioa aayo AU39
19. Consumption Max 30 W Passive Standby Under 1 W Frequency Range Separate internal fuse eteeueD The input should be protected against lightning Audio Mode Single channel Dual channel Joint stereo Stereo Video Format 4 3 16 9 Size w h d 385 mm x 58mm x 257 mm Video Resolution 1080p 1080i 720p 576p 576i Weight Net 2 0 kg Bee aca Note The specifications are subject to change without notice RAM 256 MB EEPROM 8 KB udio Video Data In Out Video RCA YPbPr HDMI HDCP Audio Audio L R S PDIF Digital Audio Output Data In Out USB USB 2 0 Host 5 V 500 500 mA Max HDD 500 GB 1TB AU32 Appendix Trouble Shooting Before contacting the customer service centre make sure to read the tips below carefully If the problem persists after you complete the following procedure please contact HUMAX Australia Customer Service for further instructions 1 No message is displayed on the front display The product will not switch on e Check the main power cable and make sure it is plugged into a suitable power outlet e Check if the ring in the front panel is blue It is orange on standby mode by default e Check that the mains supply is switched on e Connect the power cable to a different power outlet e Check that the power switch is on at the rear of the product where applicable 2 No picture e Make sure that the product is powered on and in operation mode
20. Deleting message on the top right corner Do not switch off before the Deleting message disappears If you want to delete more than one file or a folder you can use the RED button to check mark the files or folders you want to delete at the same time 17 Reading files from the external HDD e Connect the external HDD to the USB port and press the MEDIA button and then press the BLUE button Then select USB Select a file you want to play out of the USB and press the OK button 18 The product does not recognize larger external HDDs e HUMAX recommends to use external HDDs up to 1TB only If the external HDD is making a ticking sound this may indicate that the electricity is not sufficient Please connect the power cable of the external HDD or connect another USB cable to the product 19 TV Portal is not working e Please make sure that the internet is properly connected e To check if the internet is connected when using a WLAN USB dongle Check if the USB dongle is lighted green Go to Menu gt Settings gt System gt System Information and see if the Network Connected message is displayed e To check if the internet is connected when using a wired LAN Go to Menu gt Settings gt System gt Internet Setting gt Configure LAN and check if the see the IP Address Netmask Gateway Address and DNS Address is correct Note Please note that the internet speed can be slow according to each user environment and this may cause delay in
21. HD Digital Terrestrial Receiver User s Manual HDR 7510T The default password is 0000 www humaxdigital com au lal UMAX Contents amp Accessories Contents Contents amp ACCESSOLICS sccsscsesscecssscceccssccsscescsssceesseeees 3 Contents Accessories Front Rear QUICK Start Guide u ieecscsscssscsscsscsssscsscescsssessscsssessesees 5 Remote C ontrol Connections Wizard Managing Channels s csssssssssssscsssssssssssssssssssesssessseeees 8 Programme Information i Plate Channel List Edit Channels E e EEE IA A A E A E 12 Recording amp PlaybaCk ssssssssesssssssssesssessssessseesssessseess 14 Recording Playback a EN ET EIEEE E AI E E 19 HUMAX TV Por tl i cecssscssssssescscsssscsssscsssccsssscscsccssecceseces 24 Preferences ccccecevsscivacvisioscusincesicavvsaiecerieartocsiacsieaveiaiecarweasi 25 Installation vececcscessessscsscessscsscsscsssscsscsscsssessscsscesscsesssccesecs 26 Automatic Search Manual Search Software Update Dynamic Update Antenna Power Factory Default OY SCM AEE AA 30 Fi 9 O21 0 OMe me ENT ATT Tene eS eT eee 32 Specification Trouble Shooting HUMAX Australia Customer Support Error Messages Using the Universal Remote Control Accessories Remote Control User s Manual Batteries W LAN USB Dongle RCA Cable IceTV Flyer Quick Manual AU3 Front Note The image may differ from the actual product STANDBY Swi
22. al Possible causes The aerial is not pointing properly What to do Adjust aerial Check the cable from the aerial If you cannot resolve the problem you may need to have your aerial and installation tested by a professional The channel has a signal but no audio or video Check if the channel is currently on air Please contact the broadcasting company The channel is scrambled or not available The channel has been deleted by the broadcasting company Check if the channel is currently on air Please contact the broadcasting company The channel is for data broadcasting Remove the channel from the channel list and check for new transponder details The audio is not available The channel has a video signal but no audio Error messages Select the audio option to confirm that the channel has audio options Possible causes No access Make sure you have a subscription to the channel No access No authorisation AU36 If the product has been in standby or power off for a long time please wait for authorisation It may take up to 60 minutes Appendix Using the Universal Remote Control Setting the Universal Remote Control Set up the universal remote control so that you can control your TV with this universal remote control 1 Select the mode PVR TV you want to set by pressing the corresponding button on the remote contro
23. ay or skip scenes during playback or time shifted recording Instant Replay Time 7 sec 15 sec 30 sec Skip Forward Time 30 sec 60 sec 120 sec 240 sec Auto Delete When this option is turned on old recordings will be deleted automatically when the HDD becomes full Note The record banner will be displayed with the i plate whenever you press the i button You can change the recording duration by pressing the RECORD button during instant recording or by going to MENU gt TV Guide gt Schedule for scheduled recording The recording will continue even if you press the STANDBY button while recording The scheduled recording will start even in standby mode if the hard disk drive is recognized While watching a recorded programme you can trick play using the playback control buttons such as pause fast rewind instant replay etc You can record the digital TV or radio programmes only Make sure that there is enough free space before recording If there is no sufficient space on the hard disk drive the recording will stop The space for recording a 1 hour programme may differ depending on the programme To view the recorded programme list press the MEDIA or MENU button and select Video AU15 Recording amp Playback Playback You can playback the recorded programmes that are stored in the hard disk drive Playing Recordings Video You can access the recorded programme list easily and play the recorded program
24. ays the HDD Kenven USB Displays each partition of the connected USB storage devices Select a USB e Network Displays the connected home network devices Select a server AU18 Note The USB port on your product supply 800mA Make sure to connect the power if you use the USB storage device which requires an external power supply If the USB storage device is connected in standby mode it will automatically be recognised when the product is turned on Do not disconnect the USB storage device during playback the stored files or the USB storage device may be damaged USB storage devices below USB 2 0 are supported but they may not work properly HUMAX cannot guarantee compatibility with all USB storage devices and assumes no responsibility for any loss of data Media List Using the Home Network Media Server Your receiver is ahome network device capable of sharing media files with other home network devices such as the PC NAS or another HUMAX PVR when they are connected to the same home network You can play the video music or photo files that are stored in your PC on your receiver when the PC is connected to the same home network Connecting to Home Network 1 Connect the receiver to your home network by connecting to the router 2 Press the MENU button and go to Settings gt System gt Internet Setting 3 Set the options for the LAN or WLAN Refer to System gt I nternet Setting for details Playing Files On Y
25. elect the state you currently live in 2 Display Set the video output to your TV 3 Automatic Search Channel search will begin automatically Save the found channels when the search is complete 4 EPG Type Select the EPG Type you want If you already have an IceTV account or wish to take advantage of the additional features of IceTV select IceTV Note To use the IceTV EPG connect the receiver to the internet via Ethernet or USB wireless dongle Refer to Connecting the Network 5 Result The result of the installation wizard will show Select Finish to exit the wizard AU7 Managing Channels Programme Information i Plate Icons The i plate is an information banner that is displayed for a few seconds whenever you change channels Press the i button while you watch a programme to display the i plate Press the Exit button on the remote control to hide it Channel number and programme name 1003 SEASONS l E Playing time Icons Signal strength and quality Ins Magazine Locked Programme Parental guidance programme Subtitle Dolby Digital audio curent time anddatg Group name g Dolby Digital Plus audio Teletext Resolution HD programme Viewing detailed programme information Press the i button again while the i plate is displayed Viewing Previous next programme information Press the lt gt button while the i plate is displayed
26. ess the OPT button 2 Select Slide Mode and press the OK button Display Time 5 sec Display Time The duration a photo is Music Play On displayed e Music Play Select On to play music namini Cancel files during slideshow e Folder Select the folder the music files i Select are located in using the RED button 3 Select OK to save and exit Function buttons Thumbnail Coloured or OPT button Photo Slideshow Select a file and press the OK or PLAY button All files in the folder will display successively To slideshow the selected files only select the files using the RED button and press the OK or PLAY button The information banner displays while slideshow is paused AU22 Media List Viewing Photo Press the b Il button to pause a slideshow and display an information banner and the colour buttons You can change a photo using the lt gt buttons Editing Files You can delete move or rename the photo files Refer to Using Video List gt Editing Files AU23 HUMAX TV Portal HUMAX TV Portal TV Portal is a web service portal which allows you to access various applications The operation of the TV Portal depends on your internet provider TV Portal services including Catch Up TV and Video on Demand will add to your metered internet usage and may result in additional charges Please check with your ISP provider for details of their internet plan Please refer to the disclaimer in
27. have forgotten your password please contact HUMAX Australia Customer Service Enter the password to view the blocked programmes Language Setting You can set the system language Setting Power On Off Timer You can set the time the receiver powers on or powers off Video Setting Screen Ratio You can select the screen ratio of your TV Display Format You can select the display format according to the screen ratio of your TV Resolution You can set the resolution of the screen Audio Setting Digital Audio Output You can select the digital audio signal output Lip Sync You can adjust the sound difference between audio and video Screen Display Info Display Time You can set the duration the i plate is displayed whenever you change the channel Transparency You can set the transparency of the On Screen Display Subtitle Display You can set to display the subtitle automatically or not Subtitle Font You can set the subtitle font EPG Type Setting EPG Type You can set the EPG type to HUMAX mode or IceTV mode AU25 Installation Automatic Search Installation menu allows you to search the available TV and radio channels Aubos atic Saparch Note The default password is 0000 If you have forgotten your password please contact HUMAX Australia Customer Service Press the MENU or EXIT button to exit AMEND gt Settings gt Installation gt Automatic Search You can search channels automaticall
28. ings and make space for new recordings e Check if the recording conflicts with another channel Stop the current recording or wait until the recording is finished e Check that the product is switched on when the recording starts If you are missing first or end bits of the programme please set the padding time by going to MENU gt Settings gt Preferences gt Recording gt Sta rt End Padding Time 12 Cannot operate Time Shifted Recording PVR only e TSR may not be available during recording Wait until the recordings is finished Delete unnecessary programmes and make space for new recordings 13 Cannot playback PVR only The signal during recording may be weak or the hard disk may be too full e Playing back on live TV is only available after watching the channel for at least 30 seconds 14 Cannot change channels while recording PVR only e Certain channels may not be changed due to restriction of the tuner or connection type 15 Deleting a folder programme in media Press the MEDIA button and select a file or a folder you want to delete and press the OPT button and delete AU34 16 Moving files to the external HDD Press the MEDIA button and select a file or a folder you want to move and press the OPT button Select Move Copy and press the OK button When the Move Copy Files message displays select External and press the RED button Please note that once you move or copy a file or a folder there will be a
29. l The button will blink once Keep pressing the button for 3 seconds until the button lights on Enter the 3 digit code Every time a number is entered the button will blink When the third digit is entered the button will blink twice If a valid 3 digit code is entered the product will power off Press the OK button and the mode button will blink three times The setup is complete If the product does not power off repeat the instruction from 3 to 5 Note When no code is entered for 20 seconds the universal setting mode will switch to normal mode Try several setting codes and select the code that has the most functions Setting the Code Randomly 1 Select the mode PVR TV you want to set by pressing the corresponding button on the remote control The button will blink once Keep pressing the button for 3 seconds until the button lights on Press the PAGE CH or PAGE CH key randomly until the mode button blinks When the valid 3 digit code is found the mode button will blink twice and the product will power off 5 Press the OK button and the mode button will blink three times The setup is complete 6 If the product does not power off repeat the instruction from 3 to 5 Finding Out the Code You can find out the 3 digit code of the TV universal code that is active 1 Select the mode PVR TV you want to set by pressing the corresponding button on the
30. ly towards the receiving part of the product e Remove and reinsert the batteries in the remote control e Replace the batteries in the remote control for a new set e Set the remote control to STB or PVR mode if you are using the universal remote control where applicable Cannot make reservations e Check that no previous reservations are conflicting with the new reservation The product has 2 tuners and therefore can only record 2 programmes at the same time No password information is given e The default password is 0000 Channel search does not work e Please make sure that antenna cable is appropriately connected to the product Terrestrial Use the appropriate antenna capable of receiving VHF or UHF channels for your area Cannot update new software If your product is connected to the internet you can go to TV Portal and run the Software Update application to update new software If your product is not connected to the internet you can update new software through USB Please visit http www humaxdigital com au support swdownload asp for more information about how to update new software through the USB AU33 Appendix 10 The product makes a humming noise Please make sure that there is no dust around the fan If the symptom persists please call HUMAX customer service on 1300 737 937 11 Cannot record progammes PVR only e The hard disk is full Please delete unnecessary record
31. mes Press the MEDIA button Press the MENU button and select Video Select a file and press the OK button Playback will start You can perform fast rewind fast forward and pause while playing back a recorded programme The green playbar is displayed when you press the playback control buttons during playback Play Status f Present time Start time Play pointer Total Time AU16 Playback Controls Play Pause Stop playback and go to live TV Rewind Fast Forward Replay the scene HOODOO Skip the scene Note Refer to Media List gt Using Video List for more details about the recorded programmes Recording amp Playback Pausing and Rewinding Live TV TSR Time Shifted Recording TSR allows you to pause a live broadcast and return later where you left off TSR starts when channel is selected The TSR function temporarily saves the programmes you watch to the hard disk drive automatically The maximum TSR time is 120 minutes To pause the programme you are watching Press the b Il button Press the b Il button to return Pause makes a time gap between the live broadcasting point and watching point The time gap is equivalent to the period the programme has been paused Press the W button to close the time gap and go to live programme To rewind and watch missed scenes Press the q lt button Press the Il button at the point where you want to start watching You can pause
32. ou use a router or modem that has a 1 Select FTP Server DHCP Dynamic Host Configuration Protocol 2 Select On to use the receiver as an FTP server server function select DHCP The IP address will 3 Go to Internet Setting gt Configure Lan WLAN to automatically be determined find out the IP address which is needed to connect to e Manual If there is no DHCP server on the network the FTP server and you want to set the IP address manually select 4 Enter your IP address FTP Xxx Xxx X Xxx on your Manual Enter the values for IP Address Subnet Mask internet browser address field Gateway Address and DNS Address 5 Enter the user name and password 3 Select Apply to connect to the selected network and User name HumaxETP press the OK button Password Your PIN code Default 0000 Note When entering the IP address manually enter 3 digits in a row The network is connected by LAN when both WiFi and LAN are activated HUMAX recommends the network connection over a direct LAN Content Sharing You can find video music and photo files in the HDD and play them on your TV or send those files to other devices Make sure the network is connected to both devices 1 Select Content Sharing 2 Select On to connect to the HDD from other devices AU31 Appendix Specification No of Tuners 2 Input Voltage 90 250 V Input Connector IEC 169 2 female Type SMPS 174 230 MHz VHF 520 820 MHz UHF Power
33. our Receiver Files stored in the PC NAS or another HUMAX PVR Press the MEDIA button Press the BLUE button and select Network Select a server from the list Press the YELLOW button and select the media type Select the files you want to play aR WN gt Note Home network media server software such as Window Media Player must be installed and executed on the PC to share media files stored in the PC The media files must be stored in the library folder of the PC Windows 7 or higher and Windows Media Player 11 or higher are recommended Home Network Media Player l WZ Media Server AU19 Media List Using Video List Note l l l l l l l You will be prompted to enter the password when you play the locked files You can play TV radio recordings or video files stored in the hard disk drive Some playback control buttons may not function depending on the contents USB storage device or the home network devices Press the MENU button and select Video Editing Files Path Storage Sort Sorting Files Media Video i You can sort the video files in alphabetical or time order Ger a k ree storage P j 155 8 GB available Deleting Files i Delete INE Select Yes and press the OK button Drama 2011 Lock Locking Files SEPIA Unlock Enter the password tzOmin gt Moving the files within the same storage
34. play the list of the selected channel group TV Radio Favourite 1 5 Recent Sorting Channels Press the RED button to sort the channels in numerical or RED alphabetical order rock Select On or Off Deleting Channels Derete Press the OK button Banana Renaming Channels Press the OK button and enter the name in the keyboard Note The default password is 0000 If you have forgotten your password please contact Humax Australia Customer Service To edit multiple channels go to MENU gt Settings gt Edit Channels AU9 Managing Channels Edit Channels Editing Channel List RED AW gt Settings gt Edit Channels gt Password gt Edit Channel List Edit Channel List will help you edit multiple channels Group name Marked Total channels J aU YELLOW Ww Cc m 1 J Function buttons Coloured button Note Locked channel Press the TV RADIO button to switch between TV and Radio groups Press the MENU or EXIT button to exit Press the BACK button to return to the previous screen The channels that are automatically numbered by the broadcaster cannot be deleted or moved The default password is 0000 AU10 Deleting Channels Select the channels using the amp and OK button and press the RED button Changing Group To list the channels of other groups press the GREEN button and select a group you want Changing Background You can change the channel displayed in
35. r details on playback control and playbar AU20 Media List Using Music List Music Player The music player displays You can play music files stored in the hard disk drive USB storage device or the during playback home network devices Press the MENU button and select Music Path Storage Free storage 155 8 GB available fi Upper Folder Miss You mpd Everything misia mps ee Play Pause Time is Running Gut imp3 Stop the music player and display the list Play the previous file Play the next file Change the play mode PUMO O Exit the music player and go to live TV EXIT Function buttons Title Artist Album Coloured or OPT button as Editing Files You can delete move or rename the music files Refer to Using Video List gt Playing Files Editing Files Select a file and press the OK or PLAY button All files in the folder will play successively To play the selected files only select the files using the RED button and press the OK or PLAY button AU21 Media List Using Photo List You can play photo files stored in the hard disk drive USB storage device or the home network devices Press the MENU button and select Photo Play Pause Stop slideshow and display the photo list Show the previous photo Show the next photo POOa O Path erage Exit slideshow and go to live TV EXIT Media Photo Slide Mode You can play music files during slideshow 1 Pr
36. remote control The button will blink once 2 Keep pressing the button for 3 seconds until the button lights on 3 Press the INFO button 4 The 3 digit code number will blink starting from the 3rd digit Button TV Button TV STANDBY POWER MEDIA aK MUTE GUIDE GUIDE mus OK OK TV UP UP 1 DIGIT 1 LEFT LEFT 2 DIGIT 2 3 GE RIGHT RIGHT 4 DIGIT 4 DOWN DOWN 5 DIGITS EXIT EXIT 6 DIGIT 6 LAST 7 DIGIT 7 RECALL BACK PP LAST 8 DIGIT 8 CHANNEL 9 DATY VOL VOL 0 DIGIT 0 11 Ta E TV Portal INFO OSD MENU MENU DISPLAY gt TEXT EXPAND LIST Channel list II TEXT HOLD RIGHT RIGHT E PIP INPUT P P REC PIP MOVE P P 44 PIP OFF TEXT TEXT gt gt PIP TV DTV ATV DTV D A TEXT MIX TV RADIO DTV TV DTV TEXT OFF TV IGN RED RED lbs WIDE GREEN GREEN FORMAT YELLOW YELLOW WIDE 16 9 ASPECT BLUE BLUE ZOOM AU37 Appendix Brand Code Acer 261 278 305 Acoustic Solutions 210 312 324 370 386 428 477 Akai 102 006 098 144 145 111 061 043 074 148 232 280 128 122 461 109 462 489 094 084 083 065 035 034 033 028 023 011 004 002 154 321 Alba 006 144 134 204 087 064 036 005 108 473 455 447 388 099 084 077 072 065 059 034 023 002 Loewe 006 064 014 048 093 094 123 131 167 414 434
37. standby mode If you ignore this message the product enters standby mode automatically Data Storage gt Storage Select a storage to display the capacity of the storage gt Format Storage Format the selected storage Internet Setting Note This function is available only when the wireless USB dongle or Ethernet cable has been connected to the receiver Make sure that the wireless USB dongle or Ethernet cable is connected correctly Refer to Connecting the Network for details Configuring WLAN 1 Select Configure WLAN 2 Configure the wireless setting options e Network Name The wireless network name Security Type The WLAN security type Password The WLAN password 3 Select Apply to connect to the selected wireless network and press the OK button Note If your wireless network is not listed select Input Network Name and enter your network name in the keyboard System Channel List m TV Guide Video Music L Photo HUMAX TV Portal Preferences Edit Channels Installation System Information Signal Detection Power Management Data Storage Internet Setting Configuring LAN FTP File Transfer Protocol Server 1 Select Configure LAN Using the Home Networking function you can copy the 2 Select your IP configuration type between DHCP and recorded files from the hard disk drive to your PC with no Manual external USB devices DHCP If y
38. t or right Changes the audio volume Changes the channel or page i information OPT Option 2 COLOUR Buttons NUMERIC TV Portal MENU Inserting Batteries Displays the channel and programme information Displays the channel attributes or additional options For interactive applications 0 9 Goes to HUMAX TV Portal Displays the main menu Insert the batteries matching the positive and negative at each end AU5 Quick Start Guide Connections This section describes how to connect your product to match your particular devices and to gain optimum signal quality Warning Connect all devices before you plug any power cords into the wall outlet Always turn off the product TV and other devices before you connect or disconnect any cables Note If you encounter any problems setting up your product please contact HUMAX Australia Customer Service ANTENNA IN ANTENNA OUT AU6 Access Point Router Connecting the Antenna Connect the aerial to the ANTENNA IN Connecting the TV 2 1 Using an HDMI cable For the best picture quality use an HDMI cable to connect to the TV 2 2 Using an RCA cable For good picture quality use an RCA cable to connect to the TV 2 3 Using a component cable For very good picture quality use a component cable to connect to the TV Note Use an S PDIF cable to connect to the
39. tant recording duration Record modified duration 06 45 automatically Cancel That 70s show 16 45 1730 Cancel Mannen som talar 16 30 17 50 Cancel the scheduled recording or reminder Cancel the current recording Watching Conflict If a scheduled recording is about to start while you are watching one programme a The following programme is about to start The channel will be changed when it starts Continue record notice will pop up 30 seconds before E the scheduled recording starts 6TV6 09 00 10 25 OK The channel will change at the start OK OK time and the scheduled recording will start automatically Cancel The scheduled recording will be canceled Scheduling Conflict When a new scheduled recording conflicts with one of the previously set recordings or reminder you will be prompted to select up to two Select up to two programmes to record Scubs 13 00 13 50 programmes you want to keep El Beverly Hills 90210 13 35 14 30 E The secret life of the 13 00 15 00 Setting Recording Options A gt Settings gt Preferences gt Recording Setting Padding Time You can set the recording padding time in case the recording starts earlier or ends later than scheduled Start Padding Time Additional recording time before the programme starts End Padding Time Additional recording time after the programme ends Setting Jump Time You can set the jump time to repl
40. tches between operation and standby modes USB Connect a USB storage device Rear ANTENNA IN Connect to a TV antenna ANTENNA OUT Connect to the TV or VCR VIDEO AUDIO Use an RCA cable to connect to the TV COMPONENT OUT Use a component cable to connect to the TV SPDIF Use an SPDIF cable to connect to the digital audio device HDMI Use an HDMI cable to connect to the TV USB Connect a wireless USB dongle or external USB devices Ethernet Connect a LAN cable fos OF i w AU4 Quick Start Guide Remote C ontrol neo woe text a PVR TV STANDBY TV RADIO WIDE TEXT MUTE Playback Control Buttons TV AV MEDIA GUIDE EXIT BACK OK ARROW Buttons VOL P A v Switches to PVR mode Switches to TV mode Switches between operation and standby modes Switches between TV and radio modes Sets the display format Enters the digital text service Mutes audio REC Record lt 4 Rewind gt gt Fast Forward gt IIPlay Pause W Stop Instant Replay Skip Changes the input source Displays the media list Displays the programme guide Exits all On Screen Display OSD screens Returns to the previous channel or the previous screen Selects a menu or confirms Moves the cursor up down lef
41. the next section for more details You can access TV Portal in several ways Press the TV Portal button Press the MENU button and select HUMAX TV Portal FRI 17 42 M E fom TV APPS S FEATURED APPS You Tube TAUBE PACER MY APPS a APPEARKET ii SOE T WARE UP E E DRT ME DELETE SOFT WAS E UPDATE INTERNET RAG Note Press the TV Portal button to return to TV Portal home while using the portal service Press the EXIT button to exit Press the BACK button to return to the previous screen AU24 Note TV Portal is powered by independent service providers and the services are subject to change without notice The services may be discontinued temporarily or permanently without further notice HUMAX is not responsible for the content or the discontinuity of the services Available services may vary depending on countries More applications are to be updated Disclaimer You agree that your use of the HUMAX TV Portal Service Service is at your sole risk and acknowledge that the Service and anything contained therein including but not limited to content services goods or advertisements the Items are provided AS IS and that HUMAX makes no warranty of any kind express or implied as to the Items including but not limited to merchantability no infringement title or fitness for a particular purpose or use HUMAX is not responsible for the quality of the broadband and an
42. tsu 002 011 032 035 042 137 173 187 002 032 035 137 Fujitsu Siemens 172 211 230 246 268 369 Funai 144 134 043 275 336 369 407 GoldStar 006 144 145 111 061 001 007 020 023 027 034 035 047 067 Gooding 087 Goodmans 102 006 120 144 103 134 124 444 204 087 043 036 005 478 211 232 477 250 476 271 445 355 370 373 440 376 382 383 386 002 004 011 035 047 052 054 065 066 084 091 094 119 121 133 172 195 210 Graetz 144 087 061 023 053 065 211 Grundig 102 006 030 087 142 005 108 498 476 448 447 445 430 405 370 271 267 250 225 135 121 010 101 096 028 077 Grunkel 211 Hannspree 262 263 264 342 401 402 463 Hantarex 006 002 094 190 260 289 Hinari 006 043 036 005 002 033 059 077 443 Hisense 102 092 165 254 265 366 491 Hitachi 006 098 124 204 208 005 019 037 146 152 153 163 169 193 197 007 206 210 217 227 295 296 330 377 399 424 483 020 021 023 027 035 054 056 060 076 081 083 084 085 089 091 094 018 106 107 011 Humax 505 299 506 507 245 319 322 411 433 479 Hyundai 164 190 192 241 244 271 291 317 338 340 341 439 Inno Hit 036 002 011 035 045 047 094 211 Irradio 006 036 002 047 065 147 JVC 111 036 005 129 130 015 029 065 072 137 149 207 264 362 408 496 Keymat 258 300 398 436 437 Lenoir 002
43. utton 2 Select Keyword and press the gt button 3 Select a keyword and press the OK button 4 Press the YELLOW button to add the selected programme to schedule Note To enter a new keyword select New Keyword Type the new keyword and press the YELLOW button to confirm By Genre Press the GREEN button Select Genre and press the gt button Select a genre and press the OK button Select the specific genre and press the OK button Scroll through the list and press the YELLOW button to add to schedule De WON eS Note Press the i button to view the detailed programme information Press the OK button to watch a found programme You can set reminders or recordings for future programmes Scheduling Reminders and Recordings Schedule shows you the list of reminders and recordings and helps you manage them A Schedule LETUE 2JUN 2013 TUE JUN New Reservation izfO6 TUE 7300 01 00 Seasons maqaalie 13 06 TUE 09 00 10253 Channel 4 iif WED 6S 20 0700 World Dup Sking iog THU EO Q00 11 75 NEA Basketball iziga FRI 3O 2000 723 Kira Mum al 14 LALO SAT DM0 1025 Smoker Extra Guide E Schedule Group mw 24hrs 1 Press the YELLOW button 2 You can add edit or delete your reminders or recordings To add select New Reservation and press the OK button To edit select a reservation and press the OK button To delete select a reservation and press the BLUE button 3 Reservation will pop up You can change
44. uture programme and press the OK button 2 Select Record the whole series Record the whole programme or Reminder and press the OK button 3 Press the OK button again to cancel the reservation The reserved programmes will be added automatically to Schedule Note If the programme you wish to record conflicts with other two recording programmes adjust the reservation appropriately If the channel is locked you will be prompted to enter your password to complete the reservation The default password is 0000 If you have forgotten your password please contact HUMAX Australia Customer Service If a programme you wish to record is in a series you can record the whole series Go to Scheduling Reminders and Recordings to reschedule reminders or recordings on the next page Changing Group To list the channels of other groups press the BLUE button and select a group you want TV Guide Finding Programmes Find will help you find the programmes more specifically according to the keyword or genre wW Find Programme HI TUE 2JUN 2013 New Keyword Star Tek Theatmica Waller 0700 127 06 BAC Star Star tek Wisurechion 0 40 12 06 ARCI shar Spanked fo Death 80550 1206 HEEL Sapias The Enpe Stipes MP 7700 T306 BRC Shar Wars The Clone Wiara 2050 245 06 BHEL Star Wars Episode li Attack Bow 106 Channels Stor Vims Episode i A Ae D739 JEG Chaonneld Schedule Group 24hrs 24hrs By Keyword 1 Press the GREEN b
45. y disruptions or discontinuation of the Services as a result of broadband provided by your Internet Service Provider ISP HUMAX does not warrant that the Service is compatible with your equipment or that the Service is free of errors or viruses and is not liable for any damage you may suffer as a result of such destructive features You agree that HUMAX its Suppliers and its third party agents shall have no responsibility or liability for any injury or damages whether caused by the negligence of HUMAX its employees subcontractors agents Suppliers or otherwise arising in connection with the Service and shall not be liable for any lost profits losses punitive incidental or consequential damages or any claim against HUMAX by any other party or any fault inaccuracy omission delay or any other failure in the Service caused by your equipment or arising from your use of the Service on such equipment For any issues or questions about the compatibility with your broadband please contact your ISP Preferences Preferences Channel List TV Guide Video Music Photo HUMAX TV Portal Preferences Parental Control Recording Media Playback Screen Display EPG Type Edit Channels Installation System Parental Control Restriction of Access You can block the programme if the programme is above the age limit Change STB Password Enter a new password Note The default password is 0000 If you
46. y without entering any other information 1 Select Automatic Search Channel search starts 2 Select Save and press the OK button to save the results Note Select Stop and press the OK button to stop the channel search The channels searched from the previous channel search will remain Manual Search AMEND gt Settings gt Installation gt Manual Search You can search channels manually by searching parameters 1 Select Manual Search 2 Configure the search options e Channel Select the channel Frequency Enter the frequency The corresponding frequency value will be automatically displayed Bandwidth Select the bandwidth Select 7MHz if your region is Australia Network Search Select On or Off 3 Select Search and press the OK button 4 Select Save and press the OK button to save the results Note Select Stop and press the OK button to stop the channel search The channels searched from the previous channel search will remain AU26 Installation Software Update The software will be updated automatically through the Regular Update feature as a default You can also check for newly released software versions by selecting SW Update in HUMAX TV Portal It is recommended that you periodically check for the availability of software update Make sure the internet is connected You can connect the internet using a wireless USB dongle or a LAN cable When using a wireless USB dongle it is recommended to use a USB

User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents