Home
User manual
Contents
1. For Minit 3K Mini J1000 R Mini J2000 3 Connect the flat cable to circuit board For Mini series For Mini J series Connect the flat cable to CN1 Connect the flat cable to CN2 connector on N board on I board board MAP Nxxx board MSAIxxx 4 screw back the side amp top cover and complete the installation Il Installation of SNMP interface board amp True Relay Contact board amp USB board Insert the SNMP interface board or True Relay Contact board or USB board into the slot Make sure to push the board to the end And fix the board with screws Remark If the metal plate fixed on the front of the board does not fit the screw holes on the rear panel change the other metal plate enclosed with the kit Ill Installation of AS 400 Board Mini J series only
2. Insert the board into the slot and fix the board to the rear panel with screws The AS 400 board can also be mounted to UPS without metal slot installed Connect the flat cable one end to the AS 400 board and the other end to the CN2 of l board MSAIxxx Advanced Power Systems IV The pin assignments of True Relay Contact Board The reference ground of the signals connected to terminal 1 8 is Ping pt 2 3 4 41 5 6 7 8 9 10 1 gt Bypass on 2 gt AC Abnormal 3 gt AC Normal 4 gt Inverter On 5 gt Battery Low 6 gt Battery Bad 7 gt UPS Alarm 8 gt Ground 9 gt The high of UPS shutdown signal 10 gt The low of UPS shutdown signal SNMP Board amp True Relay Contact Board amp AS 400 Board amp USB Board For Mini Mini series Installation Manual Advanced Power Systems Bayreuther Str 6 D 91301 Forchheim Phone 49 0 9191 7005 0 www adpos ups de A Important Note To avoid potential danger to people and to avoid damage to UPS the installation must be carried out by qualify technician Before start the installation the UPS must be completely shut down and disconnect with AC mains I Installation of metal slot Parts Required 1 x Metal Slot with flat cable connected 2 x M3x6 screws Procedures 1 Open the top and sides of the cabinet 2 Mount the metal slot on the rear panel Please note the mounting ways are different by models see pictures below
Download Pdf Manuals
Related Search
Related Contents
Series 11and 12 Valves Thank You! VisionSwitch User Manual Intermec EasyCoder C4 Label Printer RTF - Blade User Manual.cdr - Analogue Haven VersaMax Nano and Micro Controllers Sony KDL-40CX523 User Guide Manual QC3 - demeq.com Copyright © All rights reserved.
Failed to retrieve file