Leica User Manual
Contents
1. 3 Tap the nudge button A Leica mojoMINI Field Navigation 62 4 The main navigation screen is displayed and the wayline is where the vehicle is 6 11 Day Night Settings Day night settings The brightness of the screen may be set to high daylight setting or low night setting To change from one brightness setting to the other carry out the following proce dure 1 On the guidance screen tap on the informa tion icon 2 The information screen appears 3 Two options are available e To change the brightness of the display tap on the day or night icon as required e To use the calculator tap on the calculator icon Leica mojoMINI Field Navigation 63 Leica mojoMINI Field Navigation 64 6 12 The Calculator Unit Conversions Calculator The calculator is a standard one memory calculator with a square root function and a number of quick conversion buttons To open the calculator either e tap the calculator icon at the bottom of the opening screen or e tap the calculator icon on the Field Navigation information screen The calculator screen contains buttons for unit conversions e hectares to acres and acres to hectares e kilograms to pounds and pounds to kilograms e litres to US gallons and US gallons to litres Enter the number that you wish to convert and tap the conversion button The answer appears immediately e The calculator is not available w2. Version 2 0 English when it has to be Leica mojoMINI Introduction Introduction Purchase AV Product identifica tion Congratulations on the purchase of a Leica mojoMINI system This manual contains important safety directions as well as instructions for setting up the product and operating it Refer to 8 Safety Directions for further informa tion Read carefully through this User Manual before you switch on the product To ensure safety when using the system please also observe the directions and instructions contained in the User Manual and Safety Handbook issued by the e Agricultural machinery manufacturer The type and serial number of your product are indicated on the type plate Enter the type and serial number in your manual and always refer to this information when you need to contact your agency or Leica Geosystems authorised service workshop Type Serial No Symbols used in The symbols used in this manual have the following meanings this manual Description Indicates an imminently hazardous situation which if not avoided will result in death or serious personal injury Indicates a potentially hazardous situation or an unintended use which if not avoided could result in death or serious personal injury Indicates a potentially hazardous situation or an unintended use which if not avoided may result in minor or moderate personal injury appreciable material financial and en
3. example for antenna power source or modem should be protected with appro priate protection elements like a lightning arrester These installations must be carried out by an authorised specialist If there is a risk of a thunderstorm or if the equipment is to remain unused and unattended for a long period protect your product additionally by unplugging all systems components and disconnecting all connecting cables and supply cables If the product is improperly disposed of the following can happen If polymer parts are burnt poisonous gases are produced which may impair health If batteries are damaged or are heated strongly they can explode and cause poisoning burning corrosion environmental contamination or all of these Leica mojoMINI Safety Directions 77 Leica mojoMINI Safety Directions 78 e By disposing of the product irresponsibly you may enable unauthorised persons to use it in contravention of the regulations exposing themselves and third parties to the risk of severe injury and rendering the environment liable to contamination Precautions The product must not be disposed with household waste Dispose of the product appropriately in accordance with the national regulations in force in your country Always prevent access to the product by unauthorised personnel Product specific treatment and waste management information can be downloaded from the Leica Geosystems home page at http www leica geosystems
4. com treat ment or obtained from your Leica Geosystems dealer 8 6 Description A Warning caution Electromagnetic Compatibility EMC The term Electromagnetic Compatability is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present and without causing electromagnetic distur bances to other equipment Electromagnetic radiation can cause disturbances in other equipment Although the product meets the strict regulations and standards that are in force in this respect Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed There is a risk that disturbances may be caused in other equipment if the product is used in conjunction with accessories from other manufacturers for example field computers personal computers two way radios non standard cables or external batteries Precautions Use only the equipment and accessories recommended by Leica Geosystems When combined with the product they meet the strict requirements stipulated by the guidelines and standards When using computers and two way radios pay attention to the information about electromagnetic compatibility provided by the manufac turer Leica mojoMINI Safety Directions 79 Leica mojoMINI Safety Directions 80 caution A Warning Radios or digital cellular phones Warning Disturbances caused by electromagne
5. e To reduce the risk of electric shock do not open any covers There are no user serviceable parts inside Refer all servicing to qualified personnel e f the mojoMINI will not be used for a length of time unplug any external power source e Keep liquids away from the mojoMINI do not place containers of liquid on or near It e Clean the mojoMINI only with a dry cloth e Do not block any ventilation openings Do not block air flow around the mojo MINI e Do not install near any heat sources for example radiators stoves electronic amplifiers e Ensure that the power cords are not damaged e Unplug the mojoMINI during storms A Warning This product should not be used in aircraft navigation 2 1 General installa tion information Two major compo nents System Installation Before Installation cE Installation does not require specialist knowledge This user manual contains sufficient information for installation and safe use e The following instructions are to be used as a general guide during the installa tion of the mojoMINI e Install the system in a clean and dry environment Failure to do so may result in product malfunctions e Ensure that the power cables do not chafe or rub e The two major components of the mojoMINI system are the mojoMINI display and the GeoSpective smart antenna e The mojoMINI display by itself is sufficient for road navigation For agricultural guidance the GeoSpective
6. gt Favourite gt Edit gt Edit Location 2 Tap the left or right arrow to select a group and then tap OK The favourite location will now be found in the group Leica mojoMINI Travelling to an Address 37 Leica mojoMINI Travelling to an Address Travelling to a Favourite 38 To travel to a favourite address carry out the following procedure 1 Tap Go gt Favourite and then tap the destination in the Favourites list 2 If the Favourite Is inside a group tap the group name and then tap the Favourite name The Travelling to screen appears 3 Tap Go to continue 5 6 Searching for a Point of Interest POI with a name If you know the name of a point of interest POI carry out the following procedure l 2 Tap Search gt Spell The Search Near screen appears Tap one of the screen buttons to select an option for the search area e near the current location e near the destination e at another location which must be specified or e along the route On the on screen keyboard type part or all of the name and tap Search Examples e To find a coffee shop type the word COFFEE and tap Search e To find Elephant and Castle you could type either all or part of the words ELEPHANT or CASTLE and tap Search By default the points of interest are listed in order of distance from the location Tap the Sort by ABC button for an alphabetical list To display a point of interest on a map tap the name in th
7. have selected a measurement to Leica mojoMINI am F change specify the value by tapping the up or down arrows on the screen The width is AG shown in both metric and US units either may be adjusted and the other changes accord EA 10 o 00 ingly EA 00 m 0 00 m Leica dh mails 2 Tap on VA after setting each measurement TT TE Leica mojoMINI Field Navigation 43 When you are finished tap on VY while both measurements are being displayed to continue to the next screen Leica mojoMINI Field Navigation 3 Tap on the appropriate guidance type a b ML U Leica mojoMINI LE SE mojoMINI_014 izo d e b c d e 44 AB Parallel guidance Fixed Contour guidance Information A Heading guidance Pivot guidance Navigation Screen Go straight to the field view without setting guidance 6 3 Setting an AB wayline E Setting AB Waylines To set an AB parallel wayline a straight line between two selected points carry out the following procedure 1 On the guidance screen tap on the AB Parallel guidance icon 2 The first AB Parallel guidance screen appears Leica mojoMINI 3 Drive to the position in the field where you want to set waypoint A and tap A on the screen Treatment coverage can be turned on or off by tapping while setting the wayline Leica mojoMINI Field Navigation 45 Leica mojoMINI
8. is dangerous to do so Possible problems The following suggstions may be useful in solving simple problems If you suspect that something is wrong turn the power off immediately and disconnect the power source Problem Possible Cause Possible Solution Cannot turn the unit on The adaptor is not Insert the adaptor fully connected into the cigarette lighter socket The battery needs Use the adaptor to supply recharging power and to recharge the battery The mojoMINI is connected The mojoMINI has not Turn the mojoMINI on by to the power adaptor and been used for a long time pressing Reset presssing the standby and the battery is button has no effect completely discharged The screen is dark The brightness may be Adjust the brightness turned down Problem The mojoMINI cannot receive GPS signals or the signals received are weak and cannot be used The reception of GPS signals is intermittent or unstable Leica mojoMINI Troubleshooting Possible Cause The view of the sky may be obstructed by buildings or metal objects The battery needs recharging Possible Solution Place the mojoMINI so that it has a clear view of the Sky Use the adaptor to supply power and to recharge the battery The view of the sky may be intermittently obstructed for example by a piece of foil lined paper Remove the obstruction The mojoMINI was moved too rapidly Do not move the
9. mojoMINI rapidly System software has failed Turn the mojoMINI off and on again 95 Leica mojoMINI Troubleshooting Problem Possible Cause 96 Possible Solution Can not get a Bluetooth connection to the smart antenna There is an obstruction reducing the signal strenght Mount the GeoSpective Smart antenna at the front of the vehicle roof and mount the mojoMINI display high on the vehicle front glass Leica mojoMINI Troubleshooting 97 Total Quality Management Our commitment to total customer satisfaction 5 E OL cc Geosystems AG Heerbrugg Switzerland has been E certified as being equipped with a quality system which NS fi O IVI meets the International Standards of Quality Management 00 and Quality Systems ISO standard 9001 and Environmental 2 ISO 9001 150 14001 Management Systems ISO standard 14001 ee N Ask your local Leica Geosystems dealer for more information about our TQM program 2011 Leica Geosystems AG Heerbrugg Switzerland Leica Geosystems AG Heinrich Wild Strasse CH 9435 Heerbrugg Switzerland when it has to be right Cuca Phone 41 71 727 31 31 www leica geosystems com Geosystems
10. restrictions in any EEA Member state e The conformity for countries with other national regulations not covered by the FCC part 15 or European directive 1999 5 EC has to be approved prior to use and operation 1575 42 3 MHz None Internal patch antenna Leica mojoMINI Technical Data 91 Leica mojoMINI International Limited Warranty Software Licence Agreement 92 10 International Limited Warranty Software Licence Agreement International Limited Warranty Software Licence Agree ment This product is subject to the terms and conditions set out in the International Limited Warranty which you can download from the Leica Geosystems home page at http www leica geosystems com internationalwarranty or collect from your Leica Geosystems distributor The foregoing warranty is exclusive and is in lieu of all other warranties terms or conditions express or implied either in fact or by operation of law statutory or otherwise including warranties terms or conditions of merchantability fitness for a particular purpose satisfactory quality and non infringement all of which are expressly disclaimed This product contains software that is preinstalled on the product or that is supplied to you on a data carrier medium or that can be downloaded by you online pursuant to prior authorization from Leica Geosystems Such software is protected by copy right and other laws and its use is defined and regulated by the Leica Geosy
11. sections pause the recording at the beginning of each straight line section and resume recording at the end of the straight line The mojoMINI will calculate a straight line to fill the gap between the two points Leica mojoMINI Field Navigation 51 Leica mojoMINI Field Navigation 52 5 Turn the tractor until the red line is vertical and drive along the wayline C amp The navigation lightbar at the top of the screen indicates the direction to steer the vehicle For example if the marker is to the left of center turn the steering wheel to the left The row number indicator at the bottom of the screen shows the position of the tractor and the number of rows left or right of the contour 6 6 Setting Pivot Guidance Setting a pivot wayline To set up Pivot circular guidance carry out the following procedure 1 On the guidance screen tap on the Pivot guidance icon 2 The first Pivot guidance screen appears 3 Drive to the starting point of the circle in the field waypoint A and tap A on the screen Leica mojoMINI fa S Treatment coverage can be turned on or off by tapping while setting the wayline Leica mojoMINI Field Navigation 53 Leica mojoMINI Field Navigation 54 4 Drive part way around the circle to waypoint B Leica mojoMINI and tap B i Drive further around the circle to waypoint C and tap C Ul 6 Turn the tractor until the red line is vertical and d
12. 4 1 Getting Started S The images in this manual are for reference purposes only Individual screens and icons may differ from the actual items 1 1 In the Box Contents mojoMINI_001 a mojoMINI display f Mounting bracket and mounting b USB cable for display cradle c SD memory card g GeoSpective smart antenna with d Stylus power cable and mounting kit e Car charger for display h Product documentation Leica mojoMINI Getting Started 9 Leica mojoMINI Getting Started 10 1 2 mojoMINI Display Components mojoMINI_002 Description a CS om a LCD screen b Speaker c Power button d On Off Reset switch e Card slot Charge indicator Earphone jack h USB style charging port TAA SS CREO AW SO 2 Component Function LCD screen The mojoMINI is operated by touching images on the screen either with a fingertip or with the stylus provided Component Function Charge indicator When the battery is charging the light is red When the battery is fully charged the light is green Power button To enter standby mode or to return from standby mode press the power button for a few seconds Card slot Insert the SD card into this slot Earphone jack Spoken instructions from the mojoMINI may be heard through earphones or the built in speaker If earphones are connected the speaker is disable
13. 5 3 5 4 5 5 5 6 BoT 5 8 Travelling to a Specific Address Repeating a Journey Deleting Journey Data Route Information Favourite Journeys Searching for a Point of Interest Search by Point of Interest Categories Browsing for a Point of Interest 24 24 25 27 28 30 33 33 34 35 35 37 39 40 41 6 Field Navigation 42 6 1 Starting Field Navigation 42 6 2 Starting a New Field 43 6 3 Setting AB Waylines 45 6 4 Setting A Heading Guidance 48 6 5 Setting Fixed Contours Guidance 50 6 6 Setting Pivot Guidance 53 6 7 Recording Coverage 55 6 8 Field Boundaries 57 6 9 Continue Last Field 59 6 10 Nudging 61 6 11 Day Night Settings 63 6 12 Calculator 64 6 13 Changing the Brightness 65 7 Care and Transport 66 7 1 Transport 66 7 2 Storage 67 7 3 Cleaning and Drying 68 7 Leica mojoMINI Table of Contents Leica mojoMINI Table of Contents 8 Safety Directions 69 8 1 General Introduction 69 8 2 Intended Use 70 8 3 Limits of Use 71 8 4 Responsibilities 72 8 5 Hazards of Use 73 8 6 Electromagnetic Compatibility EMC 79 8 7 FCC Statement Applicable in U S 82 8 8 ICES 003 Statement Applicable in Canada 83 8 9 Labelling 84 9 Technical Data 85 9 1 GeoSpective Smart Antenna Performance 85 9 2 GeoSpective Smart Antenna Specifications 87 9 3 mojoMINI Specifications 89 9 4 Conformity to National Regulations 91 10 International Limited Warranty Software Licence Agreement 92 Appendix A Troubleshooting 9
14. Field Navigation 46 4 Drive to the desired endpoint waypoint B and tap B ES The distance between points A and B must be at least 30 metres 100 feet The greater the distance between the waypoints the better the accuracy of the working line will Be 5 Turn the tractor until the red line is vertical and drive along the wayline CS The navigation lightbar at the top of the screen indicates the direction to steer the vehicle For example if the marker is to the left of center turn the steering wheel to the left The row number indicator at the bottom of the screen shows the position of the tractor and the number of rows left or right of the AB Parallel wayline Leica mojoMINI Field Navigation 47 Leica mojoMINI Field Navigation 48 6 4 Setting A Heading Guidance Setting an A wayline To set an A Heading wayline starting point plus compass bearing carry out the following proce dure 1 On the guidance screen tap on the A Heading guidance icon L 2 The first A Heading guidance screen appears 3 Drive to the position in the field where you want to start waypoint A and tap A on the screen S Treatment coverage can be turned on or off by tapping while setting the wayline 4 Use the upper arrows to enter the compass bearing of the wayline in degrees 0 is north 90 is east 180 is south and 270 is west 5 Tap on WV 6 Turn the tractor
15. Leica Geosystems immediately if the product and the application becomes unsafe e To ensure that the national laws regulations and conditions for the operation of radio transmitters are respected The person responsible for the product must ensure that it is used in accordance with the instructions This person is also accountable for the training and the deployment of personnel who use the product and for the safety of the equipment in use 8 5 A Warning caution Hazards of Use The absence of instruction or the inadequate imparting of instruction can lead to incorrect or adverse use and can give rise to accidents with far reaching human material financial and environmental consequences Precautions All users must follow the safety directions given by the manufacturer and the direc tions of the person responsible for the product Watch out for erroneous measurement results if the product has been dropped or has been misused modified stored for long periods or transported Precautions Periodically carry out test measurements and perform the field adjustments indicated in the user manual particularly after the product has been subjected to abnormal use and before and after important measurements If the product is used with accessories for example masts staffs poles you may increase the risk of being struck by lightning Precautions Do not use the product in a thunderstorm Leica mojoMINI Safety Di
16. an initial convergence of at least 10 minutes Typical values Performance specifications subject to GPS system characteristics US DOD operational degradation ionospheric and tropospheric conditions sat ellite geometry baseline length multipath effects and the presence of intention al or unintentional interference sources Export licensing restricts operation to a maximum velocity of 515 metres per second Typical value No almanac or ephemerides and no approximate position or time Typical value Almanac and recent ephemerides saved and approximate time en tered 9 2 Input output connectors Connector protec tion GeoSpective Smart Antenna Specifications Connector Description GeoSpective COM PWR 8 to 36 V DC at 2 5 W typical while logging Serial Com port RS232 F compliant Rx and Tx signals only via optional cable Emulated radar output High supply voltage 0 5 V minimum Low 0 5 V minimum Load 3K Ohm minimum via optional cable 1 When tracking GPS satellites Item Protection Standard Electrical conducted coupled distur ISO 7637 2002 Survives all pulse types bance tolerance Leica mojoMINI Technical Data 87 Leica mojoMINI Technical Data 88 Size and weight 0155 3 mm Weight silice 495 g maximum Item Specification Storage Temperature 55 C to 90 C Not to exceed 95 non condensing Environmental specifications Immersion MIL STD 810F Met
17. aps Tap NavSet gt POI Icons and then tap check boxes beside items in the list to select them for display You may specify that the journey calculated by the mojoMINI should be either the quickest route or the shortest route To select a Journey type carry out the following procedure 1 Tap NavSet gt Road Type The Road Type 1 of 2 screen appears 2 Tap a route mode quickest or shortest to select it 3 To save the settings and return to the previous screen tap OK Leica mojoMINI Navigational Settings 31 Leica mojoMINI Navigational Settings 32 Roads to avoid Safety cameras If you wish to avoid motorways tollways ferries or gated communities carry out the following procedure 1 Tap NavSet gt Road Type and then tap the right arrow at the top of the screen The Road Type 2 of 2 screen appears 2 Tap the check boxes beside the road types that you wish to avoid 3 To save the settings and return to the previous screen tap OK In some countries safety camera locations are made public To specify an alert type carry out the following procedure 1 Tap NavSet gt Cameras The Safety Camera Options screen appears 2 Tap the button beside an option to select it 3 To save the settings and return to the previous screen tap OK If the Cameras button is not displayed then there is no safety camera data available for your location 5 Convention 5 1 Specifying an address Travelling to an Address A
18. azard exists e Do not operate the product with radio or digital cellular phone devices near to medical equipment e Do not operate the product with radio or digital cellular phone devices in aircraft Leica mojoMINI Safety Directions 81 Leica mojoMINI Safety Directions 82 8 7 AN Warning A Warning FCC Statement Applicable in U S This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interfer ence in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encour aged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifica
19. button in the bottom right hand corner of the screen Leica mojoMINI Street Navigation 27 Leica mojoMINI Street Navigation 28 3 4 General procedure Changing units Changing the Settings Settings may be changed at any time after initial setup Tap the System button and then tap one of the buttons that appear On the settings screen make the required changes The following settings may be changed e Units e Language e Time e Night Day e and Prompts To save the settings and return to the previous screen tap OK To return to the previous screen without making a change tap the return button in the top left hand corner To change the units of measurement carry out the following procedure 1 Tap System and then Units The Units of Measure screen appears 2 Tap a screen button to select a measurement system 3 To save the settings and return to the navigation screen tap OK Changing the language Setting the time Help and informa tion The language used in the display and spoken instructions can be changed Refer to Language page 25 for information about how to change the language settings The time can be changed by selecting a specific time zone Refer to Time zone page 26 for information about how to change the time zone settings Tap the Help button to display a screen with the address of a website with answers to common questions http www intrinsyc com destinator support Tap
20. d On Off Reset Use this switch to reset the system switch For storage ensure OFF position to prevent the internal battery from being drained Ensure the switch is in ON position to operate the mojoMINI USB style To charge the battery connect one end of the power adaptor charging port cable to this port and the other end to the cigarette lighter Spoken instructions from the mojoMINI may be heard through the speaker when earphones are not connected If earphones are connected the speaker is disabled Leica mojoMINI Getting Started 11 Leica mojoMINI Getting Started 12 1 3 Components LED description GeoSpective Smart Antenna a Power LED b Position status LED c Position type LED d Power Data port mojoMINI_013 Red Yellow Green Condition Pl Y Power is not available Power available but no satellites are tracking yet Off Tracking at least one satellite but not a valid position Off Position valid in basic autonomous mode On On On Position valid in an enhanced accuracy mode WAAS EGNOS MSAS 1 4 Connections AN Warning Before you connect the mojoMINI to any external device switch off both the mojo MINI and the external device 1 4 1 Inserting the SD Card SD Card mojoMINI_003 Leica mojoMINI Getting Started The SD card is inserted into the mojoMINI 13 Leica mojoMINI Getting Started 14 1 4 2 Connect
21. e list and tap Show on Map To obtain a route to a point of interest tap OK Leica mojoMINI Travelling to an Address 39 Leica mojoMINI Travelling to an Address 40 5 7 POI categories Search by Point of Interest Categories Points of interest are classified by categories for example Airports Amusement Parks ATMs and sometimes by sub categories where this is useful To search for a point of interest by category carry out the following procedure 1 Tap Search gt All The Search Near screen appears 2 Tap one of the screen buttons to select an option for the search area e near the current location or e near another location which must be specified The All POI Categories screen appears The list of categories is arranged alpha betically 3 If necessary use the Up and Down buttons at the right of the screen to scroll through the list 4 Tap on a category in the list and tap OK If a sub category list appears tap on a sub category to select it and tap OK 5 Tap on an item in the list to select it The list of items is arranged by distance from the selected location To view the list in alphabetical order tap on the Sort by ABC button 6 Tap Show on Map to display a map with the POI and then tap OK to display the Travelling to screen 7 Tap Go to calculate a route to the selected point of interest 5 8 Browsing for a Point of Interest Browsing To browse for a point of interest carry out the follo
22. e next turn tap Next Repeat to view subsequent turns To avoid a particular turn from the list of turn by turn instructions carry out the following procedure 1 On the Driving Directions screen view the turns in sequence 2 To avoid a turn tap Avoid when the turn appears in the list The mojoMINI will calculate a new route that avoids the specified turn The Lane Information bar displays all turns and the lanes from which they may be made at the next road junction 5 5 Saving a journey in Favourites Deleting a Favourite Organizing Favour ites in groups Favourite Journeys To save a completed journey in the History list into the Favourites list carry out the following procedure 1 Tap Go gt History The Select Recent Location screen appears 2 Tap on the journey that you wish to save as a favourite 3 Tap Save and use the on screen keyboard to type in a name for the journey 4 Tap OK and Save To delete a favourite from the list of Favourites carry out the following procedure 1 Tap Go gt Favourites and tap the name in the list of Favourites 2 Tap Edit gt Delete location Yes Favourites may be organized into groups in order to make it easier to find them To create a new group carry out the following procedure 1 Tap Go gt Favourites gt Edit gt Add Group 2 Use the on screen keyboard to type a name for the group To move a Favourite into a group carry out the following procedure 1 Tap Go
23. hen the mojoMINI is in Street Navigation mode e The gallon used in conversions is the US gallon not the Imperial gallon which is about 20 larger than the US gallon 6 13 Changing the Brightness Brightness To change the brightness of the screen carry out the following procedure 1 On the opening screen tap the tools icon at the bottom left of the screen 2 Tap the right arrow to make the screen brighter and tap the left arrow to make the screen dimmer 3 To return to the opening screen tap the return button Leica mojoMINI Field Navigation 65 Leica mojoMINI Care and Transport 66 7 Care and Transport 7 1 Transport Shipping When transporting the product by rail air or sea always use the complete original Leica Geosystems packaging transport container and cardboard box or its equiva lent to protect against shock and vibration Shipping transport When transporting or shipping batteries the person in charge of the product must of batteries ensure that the applicable national and international rules and regulations are observed Before transportation or shipping contact your local passenger or freight transport company 7 2 Storage Product Respect the temperature limits when storing the equipment particularly in summer if the equipment is inside a vehicle Refer to 9 Technical Data for information about temperature limits For storage ensure the mojoMINI display reset switch is in the OFF position to pre
24. hod 512 4 Procedure 1 Vibration Random MIL STD 810F Method 514 5 C17 Sinusoidal IEC 68 2 6 ASAE EP455 5 15 2 Level 1 Shock MIL STD 810 F Method 516 5 9 3 mojoMINI Specifications Type Navigation device 4 3 TFT with touch screen 480 x 272 pixel resolution speaker earphone Jack internal GPS patch antenna Interfaces 1 Bluetooth module 1 x SD Card slot 1 x USB port for power and charging only Power Supply Input Voltage 5V Power Consumption lt 8 W l l g M in f i Size and weight Weight 180 g approx mojoMINI_011 Leica mojoMINI Technical Data 89 Leica mojoMINI Technical Data 90 Environmental specifications Item Specification Operating Temperature O C to 60 C Storage Temperature 40 C to 75 C Humidity Not to exceed 90 rarely condensing Vibration 5 Hz 25 4 mm 47 mins STD operating temp 9 4 Conformity to national regula tions Frequency band Output power Antenna Conformity to National Regulations e FCC Part 15 applicable in US e Hereby Leica Geosystems AG declares that the mojoMINI and the GeoSpective Smart antenna are in compliance with the essential requirements and other rele vant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at http www leica geosystems com ce Class 1 equipment according European Directive 1999 5 EC R amp TTE can be placed on the market and be put into service without
25. ing Earphones Earphones Earphones can be connected at the right side of the mojoMINI Earphones are not deliv ered by Leica Geosys tems cE When an earphone jack is connected the speaker is turned off mojoMINI_004 A Warning Excessively loud volume may damage your hearing Precautions Turn the volume down before connecting earphones and then turn the volume up to a comfortable level 1 4 3 Power adaptor S Battery Precautions Power Supply Ria f The mojoMINI kit includes a power 7 adaptor which provides power from a Le ee vehicle with a cigarette lighter outlet Refer to 2 4 Using the Power Adaptor for more information The mojoMINI has a built in non replaceable rechargeable battery Charge the battery fully before use The initial full charge will take about three hours and a fully charged battery will deliver about two hours of use e The battery should be charged and used only when the temperature Is in the specified range 0 C 38 C 32 F 100 F e Do not block the flow of air around the mojoMINI ventilation is important e When the battery charge is low a battery low symbol will appear on the screen and the mojoMINI will eventually power off automatically Leica mojoMINI Getting Started 15 Leica mojoMINI Getting Started 16 1 5 Precautions General precau The following precautions should be followed when using the mojoMINI tions
26. is situation can also apply if you turned the mojoMINI off before completing the field 1 On the initial field guidance screen tap IL Leica mojoMINI 2 A top down view of the work done before the mojoMINI was last turned off is displayed Tap on VA to continue Leica mojolMINi p S The continue last field screen displays how much area is already covered and the area remaining within the boundary This can be helpful for calculating how much product you still need to apply to the field Leica mojoMINI Field Navigation 59 Leica mojoMINI Field Navigation 60 3 You will then be taken to the main navigation screen where you can continue work ae When continuing the last field it is possible that the wayline will not be in the same place This can be fixed using nudge 6 10 Nudging Adjusting for posi When continuing the last field it is possible that the wayline will not be in the same tion drift place due to drift in the GPS position Nudge can be used to realign the waylines and coverage data to the correct position in the field S Misalignment can be seen when the vehicle is in the right place but waylines coverage and boundary on the mojoMINI are not in the right place 1 Position the vehicle on the wheel tracks of a previously completed pass 2 On the main navigation screen tap the light bar at the top of the screen Leica mo oMINI dej K Leica mojoMINI Field Navigation 61
27. language displayed is the language that will be used in voice prompts 4 To save the settings and return to the navigation screen tap OK To return to the previous screen without making a change tap the return button in the bottom right hand corner Time zone The time is set by selecting a time zone defined as Greenwich Mean Time GMT plus or minus a number of hours Important cities in the time zones are also listed To select a time zone carry out the following procedure 1 Tap System and then Time The Time Zone Settings screen appears 2 Tap the left or right arrows to select a time zone 3 If summer time daylight saving time is in force in your locality tap the Adjust for Summer Time check box 4 To save the settings and return to the navigation screen tap OK Units of measure To set the units of measurement carry out the following procedure 1 On the Units of Measure screen tap a screen button to select a measurement system 2 To save the settings and return to the navigation screen tap OK 3 3 The Button Bar Buttons The following section refers to a number of on screen buttons for example Go Search Route NavSet which are used to perform tasks The buttons are displayed in a button bar at the bottom of the screen i a4 Le r z LA A 4 lt Button bar To reduce clutter the button bar is usually invisible To perform tasks the button bar must be displayed To display the button bar tap the
28. le ask the machinery manufacturer for instructions before mounting or installing the product Limits of Use Suitable for use in an atmosphere appropriate for permanent human habitation not suitable for use in aggressive or explosive environments Local safety authorities and safety experts must be contacted before working in hazardous areas or in close proximity to electrical installations or similar situations by the person in charge of the product Leica mojoMINI Safety Directions 71 Leica mojoMINI Safety Directions 72 8 4 Manufacturer of the product Manufacturers of non Leica Geosystems accessories Person in charge of the product Responsibilities Leica Geosystems AG CH 9435 Heerbrugg hereinafter referred to as Leica Geosys tems is responsible for supplying the product including the user manual and original accessories in a completely safe condition The manufacturers of non Leica Geosystems accessories for the product are respon sible for developing implementing and communicating safety concepts for their products and are also responsible for the effectiveness of those safety concepts in combination with the Leica Geosystems product The person in charge of the product has the following duties e To understand the safety instructions on the product and the instructions in the user manual e To be familiar with local regulations relating to safety and accident prevention e To inform
29. liers GPS navigation devices use signals from satellites to determine their exact position and display it on a map Make sure that your mojoMINI has a clear view of the sky mounting it on the windscreen will usually be sufficient Satellite signals are not available in tunnels parking garages or indoors 3 2 Starting Language First Time Setup On start up the mojoMINI screen displays a Field icon D and a Road icon TI in a grey band in the middle of the screen Tap the Road icon and the street navigation software will start The mojoMINI will calculate its position This may take a few minutes depending on the number of satellites that are visible When the street navigation is used for the first time you will be prompted to select languages timezone and units of measure Display language and voice language are selected separately and are usually the same but can be different To set the language used in the display and in spoken instructions carry out the following procedure 1 Tap System and then Language The Language Settings screen appears 2 To select the display language tap the left or right arrows in the top row on the screen The language displayed is the language that will be used on the screens and in the icons Leica mojoMINI Street Navigation 25 Leica mojoMINI Street Navigation 26 3 To select the language for voice prompts tap the left or right arrows in the bottom row on the screen The
30. n J x mojoMINI_006 1 Clean the mount points with the alcohol wipes provided 2 Mount the GeoSpective smart antenna on the roof of the vehicle Use the adhe sive tape provided or the built in magnets 3 Use the GeoSpective cable to connect the port at the back of the smart antenna to a battery or other power supply The connector fits one way only 4 Turn on the power supply to the GeoSpective smart antenna Leica mojoMINI System Installation 19 Leica mojoMINI System Installation 20 2 3 Installing the mojoMINI mojoMINI installa The mounting bracket for the mojoMINI is held in place on the windscreen of the tion tractor or road vehicle by a suction cup 1 Slide the mounting cradle onto the end of the mounting bracket 2 Set the bottom edge of the mojoMINI unit onto the mounting cradle 3 Push the top edge of the mojoMINI under the clip at the top of the mounting cradle Clean the area of the windshield where the suction cup will be placed Lift the suction cup lever and press the suction cap to the windshield Push down the suction cup lever to attach the cup firmly to the windshield Rotate the unit until the screen is comfortably visible Insert the SD card into the slot at the right of the mojoMINI CON OWN AN Warning Do not mount the mojoMINI where it may obscure the driver s view of the road or field A Warning Do not mount the mojoMINI where it may be struck by a deployi
31. n instruction in the form Tap XX gt YY means Tap the button labelled XX and then tap the button labelled YY when it appears ina pop up or new screen Travelling to a Specific Address To specify a destination address that is a particular street address carry out the following procedure 1 Tap Go gt Address The Type in Destination As screen appears 2 Tap one of the buttons to select a way of entering an address You may enter e the town or city name first e the street name first e a road junction or e a postcode 3 Use the on screen keyboard to enter names Instructions are given in a panel at the top of the screen After you have entered a few characters you may tap on the See List button to view a list of possibilities Use the Up and Down buttons at the right of the list to scroll up and down Tap on an item in the list to select it and then tap OK 4 Tap Go Leica mojoMINI Travelling to an Address 33 Leica mojoMINI Travelling to an Address 34 5 2 Repeating a Journey Have you been Details of recent journeys are retained in the mojoMINI memory and those journeys there before may be repeated To repeat a previous journey carry out the following procedure 1 Tap Go gt History The Select Recent Location screen appears 2 If necessary use the Up and Down buttons at the right of the screen to scroll up and down 3 Tap a location in the list to select it 4 Tap OK 5 On the Travelling to screen tap G
32. ng airbag Leica mojoMINI System Installation 21 Leica mojoMINI System Installation 22 2 4 Power adaptor Using the Power Adaptor The mojoMINI is supplied with a power adaptor which supplies power and recharges the battery 1 Connect the adaptor power plug into the USB style power inlet on the bottom edge of the mojoMINI 2 Connect the other end to the ciga rette lighter socket a w e Both 12 V and 24 V power inputs may be used e Before starting the vehicle disconnect the mojoMINI from the power adaptor 2 5 Connection to the GeoSpective Smart Antenna Connection to the The GeoSpective smart antenna transmits information wirelessly to the mojoMINI mojoMINI using Bluetooth technology There are no wires between the two units CE There is no configuration required Leica mojoMINI System Installation 23 Leica mojoMINI Street Navigation 24 3 3 1 S Charging before use Maps supplied How to get a good signal S Street Navigation Before Use The mojoMINI must be configured before use Charge the battery fully before using the mojoMINI You can recharge the mojoMINI while driving connect the cigarette lighter power cord to the mojoMINI power socket and plug the adaptor into the cigarette lighter The maps provided with your mojoMINI depend on where you bought the device Other maps are available for purchase go to www MYmojoMINI com for a list of supp
33. ns Only use chargers recommended by Leica Geosystems to charge the batteries High mechanical stress high ambient temperatures or immersion into fluids can cause leackage fire or explosions of the batteries Precautions Protect the batteries from mechanical influences and high ambient temperatures Do not drop or immerse batteries into fluids If battery terminals come in contact with Jewellery keys metallised paper or other metals short circuited battery terminals can overheat and cause injury or fire for example by storing or transporting in pockets Precautions Make sure that the battery terminals do not come into contact with metallic objects If the product is used with accessories for example masts staffs or poles you may increase the risk of being struck by lightning Danger from high voltages also exists A Warning near power lines Lightning voltage peaks or the touching of power lines can cause damage Injury and death Precautions Do not use the product in a thunderstorm as you may increase the risk of being struck by lightning Be sure to remain at a Safe distance from electrical installations Do not use the product directly under or in close proximity to power lines If it is essential to work in such an environment contact the safety authorities responsible for elec trical installations and follow their instructions To prevent damages due to indirect lightning strikes voltage spikes cables for
34. o 5 3 Deleting journey data 5 4 S Turn by turn Deleting Journey Data To delete journey data from the mojoMINI carry out the following procedure 1 Tap Go gt History The Select Recent Location screen appears 2 If necessary use the Up and Down buttons at the right of the screen to scroll up and down 3 Tap a location in the list to select it 4 Tap Delete and tap Yes to confirm the deletion Route Information When travelling the current street name distance to destination time and esti mated time of arrival are displayed To show a list of turn by turn instructions carry out the following procedure 1 Tap Route gt Directions The Driving Directions screen appears A driving direction comprises e a turn symbol an instruction to turn left or right to veer left or right or turn at a roundabout or traffic circle e the name of the new street and e the distance to be travelled along the new street Leica mojoMINI Travelling to an Address 35 Leica mojoMINI Travelling to an Address 36 Summary map Map of turns Avoiding a turn S Lane information 2 If necessary use the Up and Down buttons at the right of the screen to scroll up and down To show a simplified version of the route map tap Route gt Summary To show detailed maps of turns one by one carry out the following procedure 1 On the Driving Directions screen tap Turns A map of the first turn appears 2 To view th
35. off and on by TON ean 6 8 Field Boundaries Recording a field 1 To set a field boundary go to the main field navigation screen and tap Ny boundary 2 You will then have the option to set the boundary on the left wing of the imple ment in the center where the GPS antenna is located or the right wing of the implement These three options are represented by the three buttons below Leica mojoMINI L Lt L a Left wing tip b b Center mojoMINI_015 c Right wing tip 3 Tap the button which is suits the current job you are doing 4 Drive around the field boundary the path will be recorded and displayed on screen Leica mojoMINI Field Navigation 57 Leica mojoMINI Field Navigation 58 5 As you approach the start of the boundary the Close Boundary KZ button will flash You can choose to tap KZ and the boundary will close by joining the current boundary recording point to the start of the boundary recording 6 After you close the boundary you will be taken to the information screen which will show the area within the boundary a gt e The boundary can be closed automatically if you drive across the very start of the boundary e You can set a guidance pattern as well as start and stop coverage recording while you are recording a boundary 6 9 Continue Last Field Continuing a field If you stop work before completing a field you may want to come back and continue that field Th
36. rections 73 Leica mojoMINI Safety Directions 74 caution caution Inadequate securing of the working site can lead to dangerous situations for example in traffic on building sites and at industrial installations Precautions Always ensure that the working site is adequately secured Adhere to the regulations governing safety and accident prevention and road traffic Only Leica Geosystems authorised service workshops are entitled to repair these products If the accessories used with the product are not properly secured and the product is subjected to mechanical shock for example blows or falling the product may be damaged or people may sustain injury Precautions When setting up the product make sure that the accessories are correctly adapted fitted secured and locked in position Avoid subjecting the product to mechanical stress The product uses the GPS P Code signal which by U S policy may be switched off without notice During the transport shipping or disposal of batteries it is possible for inappropriate mechanical influences to constitute a fire hazard Precautions Before shipping the product or disposing of it discharge the batteries by running the product until the batteries are flat caution caution When transporting or Shipping batteries the person in charge of the product must ensure that the applicable national and international rules and regulations are observed Before tran
37. rive along the wayline CS The navigation lightbar at the top of the screen indicates the direction to steer the vehicle For example if the marker is to the left of center turn the steering wheel to the left The row number indicator at the bottom of the screen shows the position of the tractor and the number of rows inside or outside the original pivot wayline The row numbers are minus for pivot lines which are smaller than the primary line and positive for lines that are larger 6 7 Recording Coverage Start and stop The mojoMINI can record and display the covered area max 300 ha 740 ac coverage recording Recording coverage is useful for showing where you have already been and how much ground you have covered When used with the field boundary feature coverage recording can be used to calculate how much ground is still to be covered 1 To turn coverage on tap If you are not moving the coverage will not be turned on but will be paused as shown 2 Once you have started to move and have covered some ground the system will display covered ground in blue as shown Leica mojoMINI Field Navigation 55 Leica mojoMINI Field Navigation 56 3 If you stop the vehicle while coverage is turned on it will again be paused CS e When the vehicle is not moving coverage can be switched between off and Se paused by tapping j e When the vehicle is moving coverage can be switched between
38. rson responsible for the product must ensure that all users understand these directions and adhere to them Leica mojoMINI Safety Directions 69 Leica mojoMINI Safety Directions 70 8 2 Permitted use Adverse use A Warning Intended Use e Street navigation and field guidance e Data communication with external appliances e Measuring raw data and computing coordinates using satellite signals e Use of the product without instruction e Use outside of the intended limits e Disabling safety systems e Removal of hazard notices e Opening the product using tools e Modification or conversion of the product e Use after misappropriation e Use of products with obviously recognizable damages or defects e Use with accessories from other manufacturers without the prior explicit approval of Leica Geosystems e Inadequate safeguards at a work site Adverse use can lead to injury malfunction and damage It is the task of the person responsible for the equipment to inform the user about hazards and how to counteract them The product is not to be operated until the user has been instructed on how to work with it AN Warning 8 3 Environment A Danger Unauthorised modification of agricultural machinery by mounting or installing the product may alter the function and safety of that agricultural machinery Precautions Follow the instructions of the machinery manufacturer If no appropriate instruction is availab
39. smart antenna transmits information wirelessly to the mojOMINI display using Bluetooth technology Leica mojoMINI System Installation 17 Leica mojoMINI System Installation 18 2 2 Equipment required A Warning Mounting require ments Installing the GeoSpective Smart Antenna The GeoSpective smart antenna Is a high performance GPS receiver which is used in conjunction with the mojoMINI For installation and setup you will need the GeoSpective smart antenna alcohol wipes adhesive strips a GeoSpective cable to connect the GeoSpective smart antenna to the vehicle battery The GeoSpective smart antenna must be protected by a 5A fast blow fuse or damage to wiring may result This damage is not covered by warranty If the power supply voltage is outside the specified range the GeoSpective smart antenna will not operate If the power supply voltage exceeds 48 V DC then the GeoSpective smart antenna may be permanently damaged This damage Is not covered by warranty When installing the GeoSpective smart antenna choose a location that has a clear view of the sky so that all satellites above the horizon can be tracked Mount the GeoSpective smart antenna ona secure stable structure where it will not present any danger Most installations are on the tractor cab roof e The smart antenna must be mounted on the centre line of the implement or the centre line of the working width if different Installatio
40. sportation or shipping contact your local passenger or freight transport company Installing near mechanically moving machine components may damage the product Precautions Deflect the mechanically moving machine components as far as possible and define a safe installation zone Beware of inadequate steering if machine Is defective like after a crash or other damaging events or alterations to the machine Precautions Periodically perform control measurements and field adjustments on the machine as specified in the User Manual While steering or navigating the machine accidents may occur due a the operator not paying attention to the surroundings persons ditches traffic etc or b malfunctions of a system component interference etc Precautions The operator assures that the machine is operated guided and monitored by a qual ified user e g a licensed driver The user has to be able to take emergency meas ures for example an emergency stop Leica mojoMINI Safety Directions 75 Leica mojoMINI Safety Directions 76 A Warning AN Warning AN Warning AN Warning A Danger Batteries not recommended by Leica Geosystems may be damaged if charged or discharged They may burn and explode Precautions Only charge and discharge batteries recommended by Leica Geosystems Using a battery charger not recommended by Leica Geosystems can destroy the batteries This can cause fire or explosions Precautio
41. stems Software Licence Agreement which covers aspects such as but not limited to Scope of the Licence Warranty Intellectual Property Rights Limitation of Liability Exclusion of other Assurances Governing Law and Place of Jurisdiction Please make sure that at any time you fully comply with the terms and conditions of the Leica Geosystems Software Licence Agreement Such agreement is provided together with all products and can also be referred to and downloaded at the Leica Geosystems home page at http www leica geosys tems com swlicense or collected from your Leica Geosystems dealer You must not install or use the software unless you have read and accepted the terms and conditions of the Leica Geosystems Software Licence Agreement Installa tion or use of the software or any part thereof is deemed to be an acceptance of all the terms and conditions of such licence agreement If you do not agree to all or some of the terms of such licence agreement you may not download install or use the software and you must return the unused software together with its accompa nying documentation and the purchase receipt to the dealer from whom you purchased the product within ten 10 days of purchase to obtain a full refund of the purchase price Leica mojoMINI International Limited Warranty Software Licence Agreement 93 Leica mojoMINI Troubleshooting 94 Appendix A Troubleshooting A Warning Never try to repair the unit yourself it
42. the About button to display a screen with information about Destinator version and copyright Leica mojoMINI Street Navigation 29 Leica mojoMINI Navigational Settings 30 4 Convention Checking the signal Maps Navigational Settings An instruction in the form Tap XX gt YY means Tap the button labelled XX and then tap the button labelled YY when it appears in a pop up or new screen To check the GPS signal data tap NavSet gt Signal The GPS Signal screen displays whether or not a GPS signal is available the number of satellites in view the current latitude Southern latitudes are shown as negative longitude positive numbers indicate east of Greenwich and negative numbers indicate west the speed of the vehicle and altitude above sea level To display map information tap NavSet gt Maps The Select Map screen shows the name of the current map If you have more than one map installed you may change the map Click OK after you have selected another map Pedestrian setting Going home POI Symbols Quickest or shortest route To select a route suitable for pedestrians for example without freeways tap NavSet gt Pedestrian To change back tap NavSet gt Car To select your home address as a destination tap NavSet gt Home If you have not recorded your home address as a destination tap Set Address and enter the details You may specify what point of interest symbols appear on the m
43. tic radiation can result in erroneous measure ments Although the product meets the strict regulations and standards which are in force in this respect Leica Geosystems cannot completely exclude the possibility that the product may be disturbed by very intense electromagnetic radiation produced by for example nearby radio transmitters two way radios or diesel generators Precautions Check the plausibility of results obtained under these conditions If the product is operated with connecting cables attached at only one of their two ends the permitted level of electromagnetic radiation may be exceeded and the correct functioning of other products may be impaired Precautions While the product is in use connecting cables must be connected at both ends Use of the product with radio or digital cellular phone devices Electromagnetic fields can cause disturbances in other equipment in installations in medical devices for example pacemakers or hearing aids and in aircraft It can also affect humans and animals Precautions Although the product meets the strict regulations and standards which are in force in this respect Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed or that humans or animals may be affected e Do not operate the product with radio or digital cellular phone devices in the vicinity of filling stations or chemical installations or in other areas where an explosion h
44. tions not expressly approved by Leica Geosystems for compli ance could void the user s authority to operate the equipment 8 8 A Warning ICES 003 Statement Applicable in Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Leica mojoMINI Safety Directions 83 Leica mojoMINI Safety Directions 84 8 9 Labelling Labelling mojoMINI Labelling GeoSpec tive smart antenna me re N 18771 RT AG B PYT S LEIC rer ill DLL ll LR HU Rew 1 01 FIM ot Dinig Made in CANADA Leica Ari io j 9 Technical Data 9 1 GeoSpective Smart Antenna Performance tas Channel configuration 14 GPS L1 2 SBAS Horizontal position accu Autonomous 1 2m 25 cm racy RMS SBAS 0 8m 18 cm Measurement precision L1 C A code 18 cm RMS L1 carrier phase 1 5 mm RMS Maximum data rate Measurements 5 Hz Position 5 Hz Time to first fix Cold start4 65s Hot start 355 Signal re acquisition 0 5 s typical Velocity accuracy 0 03 m s RMS Leica mojoMINI Technical Data 85 Leica mojoMINI Technical Data 86 1 Satellite Based Augmentation Systems SBAS include WAAS North America EG NOS Europe and MSAS Japan Typical values with Glide enabled Pass to pass or time relative position error is the one dimensional horizontal cross track position error after 15 minutes or less after
45. until the red line is vertical and drive along the wayline CS The navigation lightbar at the top of the screen indicates the direction to steer the vehicle For example if the marker is to the left of center turn the steering wheel to the left The row number indicator at the bottom of the screen shows the position of the tractor and the number of rows left or right of the A Heading wayline Leica mojoMINI Field Navigation 49 Leica mojoMINI Field Navigation 50 6 5 Setting Fixed Contours Guidance Setting a fixed contour To set a Fixed Contour wayline carry out the following procedure 1 On the guidance screen tap on the Fixed Contour guidance icon 2 The first Fixed Contour guidance screen Leica mojoMINI appears 6 3 Drive to the position in the field where you r want to start waypoint A and tap A on the screen f A LE 18 CE Treatment coverage can be turned on or off by tapping Er while setting the wayline 4 Drive along the curved line to the desired endpoint waypoint B and tap B i While the mojoMINI is recording contour data the pause symbol Qu is shown If you want to pause the recording at any time tap the pause symbol The resume symbol will appear Tap the resume symbol S when you are ready to continue recording S If you are recording a contour that contains one or more straight line sections joining curved
46. vent the internal battery from being drained Li lon batteries e Refer to 9 Technical Data for information about storage temperature range e A storage temperature range of O to 30 C 32 to 86 F in a dry environment is recommended to minimise self discharging of the battery e At the recommended storage temperature range batteries containing a 10 to 50 charge can be stored for up to one year After this storage period the batteries must be recharged e After storage recharge batteries before using Leica mojoMINI Care and Transport 67 Leica mojoMINI Care and Transport 68 7 3 Cleaning and Drying Product and acces Use only a clean soft lint free cloth for cleaning If necessary moisten the cloth with sories water or pure alcohol Do not use other liquids these may attack the polymer compo nents Damp products Dry the product the transport container the foam inserts and the accessories at a temperature not greater than 40 C 104 F and clean them Do not repack until everything is completely dry Always close the transport container when using in the field Cables and plugs Keep plugs clean and dry Blow away any dirt lodged in the plugs of the connecting cables 8 Safety Directions 8 1 General Introduction Description e The following directions should enable the person responsible for the product and the person who actually uses the equipment to anticipate and avoid opera tional hazards e The pe
47. viron mental damage or all of these Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner Information This product includes software licensed from Intrinsyc Software International Inc 2004 2008 Leica mojoMINI Introduction 3 Leica mojoMINI Introduction Trademarks e Windows is a registered trademark of Microsoft Corporation e Destinator is a registered trademark of Intrinsyc Software International Inc e Bluetooth Is a registered trademark of Bluetooth SIG Inc e SD is a trademark of the SD Card Association All other trademarks are the property of their respective owners Table of Contents In this manual Chapter Section Page 1 Getting Started 9 1 1 In the Box 9 1 2 mojoMINI Display 10 1 3 GeoSpective Smart Antenna 12 1 4 Connections 13 1 4 1 Inserting the SD Card 13 1 4 2 Connecting Earphones 14 1 4 3 Power Supply 15 1 5 Precautions 16 2 System Installation 17 2 1 Before Installation 17 2 2 Installing the GeoSpective Smart Antenna 18 2 3 Installing the mojoMINI 20 2 4 Using the Power Adaptor 22 2 5 Connection to the GeoSpective Smart Antenna 23 Leica mojoMINI Table of Contents 5 Leica mojoMINI Table of Contents 3 Street Navigation 4 5 3 1 3 2 3 3 3 4 Before Use First Time Setup The Button Bar Changing the Settings Navigational Settings Travelling to an Address 5 1 5 2
48. wing procedure 1 Tap Search gt Browse 2 On the confirmation screen tap Yes 3 On the map that appears search for points of interest move the map by touching the screen and dragging your finger For more information about a point of interest touch it this will also give you the option to navigate to the point 4 Tap the bottom of the map to return to GPS mode S If you cannot find a point of interest that you know exists it may not be included in the map supplied Leica mojoMINI Travelling to an Address 41 Leica mojoMINI Field Navigation 42 6 Field Navigation 6 1 Starting Field Navigation Starting field guid On the mojoMINI opening screen tap on the Field icon Vy ance The initial screen appears Leica mojoMINI PP a Antenna connection Ei ju status b GPS and speed status c Start new field P d Continue last field e Return button return to previous or displayed eae screen Press Will to start a new field or to continue your last field with the previous wayline ae Some features may not be available until the mojoMINI has a GPS position 6 2 Starting a New Field Setting the vehicle After selecting the start new field option set the implement width and distance from offsets the antenna to the implement by tapping the measurement you want to change S Both measurements are important for spacing out the waylines and accurately displaying treatment coverage 1 When you
Download Pdf Manuals
Related Search