Nokia E7-00 RM-626 Service Manual Level 1&2
Contents
1. Service Manual Level 1 amp 2 56 Lift up the DISPLAY and turn it around While turning the DISPLAY be careful not to damage the DISPLAY flex P 57 Open the DISPLAY connector with the SS 93 Be careful not to damage the connector 60 Use the SRT 6 to release the SPACER FLEX LID Be protective film careful not to damage the components nearby 22 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care UN Service Manual Level 1 amp 2 Academy s 62 Open the WINDOW connector with the SRT 6 Be Do not use it again Discard it careful not to damage the connector 63 Release the shown part of the WINDOW flex with 64 The WINDOW can now be separated the dental tool Be very careful not to damage the flex while releasing it y E NM 66 Remove the EARPIECE with the tweezers Do not use the EARPIECE again Discard it 65 Release the FARPIECE with the SRT 6 23 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care ur Academy Service Manual Level 1 amp 2 67 The Nokia E7 00 disassembly is now complete END OF DISASSEMBLY 24 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy Service Manual Level 1 amp 2 10 ASSEMBLY INSTRUCTIONS 1 Nokia E7 00 assembly 2 You must use the Nokia Standard Toolkit version 2 You will als2. ste GPS ANTENNA NHF SPEAKER o 10225 N 10229 ANTENNA FRAME 0227 MENDA ADHESIVE 10230 SCREW SIZE 4 1 M1 4x3 9 10228 BATTERY BL 4D 10232 SIM HOLDER gt 10235 10233 10234 lt gt SCREW SIZE4 1 1 4 3 9 1 Only available lt Not reuseable Repair swap K s assembly after removal only in level 3 10 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 Care Academy T SERVICE DEVICES FLS 5 Flash Device CA 101 Service Cable BL 4D Battery SS 210 Camera Removal tool 55 231 RF Connector tool 11 Nokia E7 00 RM 626 Service Manual Level 1 amp 2 AC 10 Travel Charger Nokia Standard Toolkit v2 For more information refer to the Service Bulletin SB 011 on Nokia Online Supplier or manufacturer contacts for tool re order can be found in Recommended service equipment document on Nokia Online Confidential Copyright 2010 Nokia All rights reserved Version 1 0 Nokia 7 00 NOKIA Care stra Academy Service Manual Level 1 amp 2 8 SOFTWARE UPDATE Flash concept Point of Sale To use the FLS 5 Flash Dongle follow the user guide inside the sales package Please check always for the latest version of flash software which is available on Nokia Online CARE mx SUITE BSA m FE PRODUCT WITH E EMBEDDED BATTERY TRANSCEIVER
3. 12 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy Service Manual Level 1 amp 2 9 DISASSEMBLY INSTRUCTIONS 1 Nokia E7 00 disassembly 2 You must use the Nokia Standard Toolkit version 2 You will also need the SS 231 RF Connector tool 55 210 Camera Removal tool and an AV plug uis gt SES 3 Protect the WINDOW with protective film 4 Pull out the SIM HOLDER with the SRT 6 and remove it 5 Open the HDMI door i 6 Use the SRT 6 to release the he TOP END DECO as shown 13 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care 9 Service Manual Level 1 amp 2 8 Unscrew the two Torx size 4 screws in the order shown EE Dm 11 To release the BOTTOM END DECO slide the SRT 6 12 Remove the BOTTOM END under it to the direction shown 14 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care R626 Service Manual Level 1 amp 2 Academy d H dece p 15 Unscrew the shown size 4 screw Do not 16 Slide the device open use it again Discard it amp fan ee 17 Then turn the display part of the device as 18 Unscrew the four Phillips size 00 screws in the shown order shown Do not use them again Discard them 15 Confidential Copyright 2010 Nokia All rights reserved Vers
4. NOKIA Care uv Academy Service Manual Level 1 amp 2 SERVICE MANUAL Level 1 amp 2 NOKIA E 00 RM 626 Transceiver characteristics Band WCDMA 850 900 1800 1900 2100 EGSM 850 900 1700 1900 Display 4 AMOLED up to 16 million colors 16 9 widescreen aspect ratio 640x360 pixel resolution Camera 8 Mpix Full Focus EDOF camera with dual led flash Operating System Symbian 3 Connections HDMI connector with Dolby Digital plus analog TV out with stereo audio via 3 5 mm AV connector Micro USB 2 0 with OTG support Bluetooth 2 1 EDR and 3 0 WLAN 802 11 b g n Transceiver with BL 4D battery pack GSM Up to 9 hours Up to 430 hours WCDMA WCDMA Up to 5 hours Up to 470 hours Note Talk times are dependent on network parameters and phone settings 1 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 Table of contents t lt 4 2 WARNINGS AND 5 2 1 P NICE 5 2 2 OOS EEE 5 3 ESD PROTECTION 6 MAINTENANCE 1 5 BATTERY INFORMAT ON erre eren rrne nre rne reete
5. EU N A CELT E ty eat 1 m Aur i 4 e 1 lt ARAT n x Th Tey tus 1 a ry am b Dn T ww sn Ld M 21 Press also from the other side of the device as 28 Place the LID FRAME onto the WINDOW and press shown to lock the shown clip holding the WINDOW from all sides of the FRAME to attach it to the in the LID CHASSIS ASSEMBLY CHASSIS ASSEMBLY IYAN DN 29 Slide open the device Tighten these two TORX 30 Tighten these two TORX size 4 screws to the size 4 screws to the torque of 5 Ncm in the order torque of 12 Ncm in the order shown shown 29 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy Service Manual Level 1 amp 2 BASE CHASSIS ASSEMBLY 33 Tighten these two TORX size 4 screws to the 34 Tighten these two TORX size 4 screws to torque of 5 Ncm in the order shown torque of 12 Ncm in the order shown 35 Remove the DUMMY KEYMAT with the tweezers 36 Move the two coaxial cables to the side so that and close the device they are not damaged while assembling the ENGINE BOARD 30 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care M Academy Service Manual Level 1 amp 2 37 Connect the UI FLEX connector Be careful nott
6. Connect OWERTY to attach the camera retaining clips connector with the SS 93 Be careful not to damage the connector 32 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NOKIA Care R626 Academy Service Manual Level 1 amp 2 E AR NN 49 Place the CONNECTOR LOCK PLATE to its place 50 Close the device and insert the BATTERY to its Press the CONNECTOR LOCK PLATE with the SS 93 to place attach the two clips holding it MENT i Del 51 Remove the camera window protective film from 52 Insert the shown side of the BACK COVER into the inner side of the BACK COVER BASE CHASSIS ASSEMBLY 53 Then press from the opposite side to lock the 54 Tighten the four TORX size 4 screws to the BACK COVER to the BASE CHASSIS ASSEMBLY torque of 14 Ncm in the order shown 33 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care 9 Service Manual Level 1 amp 2 8 Nem 55 slide open the device Slide the WERT KEYMAT 56 Tighten the four Phillips size 00 screws to the edge under the BACK COVER EDGE as shown torque of 8 Ncm in the order shown DC close the device Push the BOTTOM END CAP into 58 Tighten the TORX aad screw to the torque of its place and make sure that both sides are correctly 10Ncm placed and there is no gap visible 59 Take new BO
7. M1 4x3 8 10220 10221 SCREW SIZE 4 D 1 lt gt SCREW SIZE 4 4 M1 6x2 5 1 0 1 9 10008 10009 4 12 amp T SCREW SIZE 4 1 4 5 6 10201 SCREW PHILLIPS QWERTY SIZE 00 M1 4x2 3 veut 10203 10202 od TYPE LABEL x Vu e 4 NOU Oe 10238 SCREW TORX SIZE 4 NM 003 SN M1 4x3 0 CONNECTOR LOCK PLATE 10237 1 Ed BOTTOM END CAP TOP END DECO d 10236 10001 N e SCREW TORX SIZE 4 RF1 4x3 0 10002 j 10003 Only available Not reuseable Repair swap Ver 1 0 Page 1 2 25 assembly iri after removal Only in level 3 9 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NOKIA Care Nokia E7 00 RM 626 Academy Service Manual Level 1 amp 2 A 3 BASE CHASSIS ASSEMBLY 10205 10216 MICROPHONE es iw 10214 BASE CHASSIS n ANTENNA PWB she g 10215 DOMESHEET QWERTY 10205 FLEX MODULE 10206 AV JACK COAX CABLE BLACK Ill 770207 Y POWER KEY 10209 10208 COAX CABLE WHITE A 4 LIGHT SWAP PACKAGE 10210 10222 10223 WASHER ME 10212 4 2 02 SCREW PHILLIPS ste LIGHT SWAP PWB XC ESO SIZE 00 M14x2 3 10222 10211 N CABLE COVER e 10213 CAMERA MODULE NO A5 PWB FRAME ASSEMBLY 10225 10227 ANTENNA FRAME ASSEMBLY A6 10229 10231
8. Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products may vary by region IMPORTANT This document is intended for use by qualified service personnel only 4 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy Service Manual Level 1 amp 2 2 WARNINGS AND CAUTIONS Please refer to the phone s user guide for instructions relating to operation care and maintenance including important safety information Note also the following 2 1 Warnings 1 CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI SKID BRAKING SYSTEMS UNDER CERTAIN FAULT CONDITIONS EMITTED RF ENERGY CAN AFFECT THEIR OPERATION IF NECESSARY CONSULT THE VEHICLE DEALER MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY 2 THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS SERVICE STATIONS BLASTING AREAS ETC 3 OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT INCLUDING CELLULAR TELEPHONES MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE 2 2 Cautions 1 Servicing and alignment must be undertake
9. TTOM END DECO 60 Attach the BOTTOM END DECO onto the BOTTOM END CAP as shown Press the BOTTOM END DECO to activate the adhesive 34 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy xcd E 61 Tighten the TORX size 4 screw to the torque of 10 Ncm 65 Tighten the two size 4 screws to the torque of 10 Ncm in the order shown 35 Confidential Copyright 2010 Nokia All rights reserved Nokia E7 00 RM 626 Service Manual Level 1 amp 2 n 62 Remove the protective film from the TO CAP 64 Push the TOP END CAP into its place as shown Make sure the TOP END CAP is correctly in its place and there are no gaps visible 66 lose the HDMI door Version 1 0 NOKIA Care R626 Academy Service Manual Level 1 amp 2 SA IET Ss en E 67 Remove the protective film from TOP END DECO 68 Remove the protectiv side Lu a BSS sua 69 Place the TOP END DECO as shown Push the TOP 70 Remove the volume key protective film END DECO to lock it into its place 315 mi m hn JUMT Hil bud iti 71 Push in the SIM HOLDER i 12 Test that the volume key is working by pushing it in both directions few times 36 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NOKIA Care R626 Academy Service Man
10. ed Do not short circuit the battery Accidental short circuiting can occur when a metallic object coin clip or pen causes direct connection of the and terminals of the battery metal strips on the battery for example when you carry a spare battery in your pocket or purse Shortcircuiting the terminals may damage the battery or the connecting object Leaving the battery in hot or cold places such as in a closed car in summer or winter conditions will reduce the capacity and lifetime of the battery Always try to keep the battery between 15 C and 25 C 59 F and 77 F A phone with a hot or cold battery may temporarily not work even when the battery is fully charged Batteries performance is particularly limited in temperatures well below freezing Do not dispose batteries in a fire Dispose of batteries according to local regulations e g recycling Do not dispose as household waste 8 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 6 EXPLODED VIEW LID FRAME 10004 WINDOW 10005 DISPLAY 10007 EARPIECE N 10006 N gt N A1 CHASSIS ASSEMBLY A2 A3 10217 I0221 LID CHASSIS ASSEMBLY A2 10101 10103 SPACER FLEX LID 10101 UI FLEX 10102 LID CHASSIS et 10103 HINGE ELEMENT n ELEMENT s sf AUXILIARY SHAFT 10218 e HINGE PIN fe 10219 SCREW TORX SIZE 4 ste HINGE COVER 22
11. ess below Nokia Care Academy service manuals nokia com Please keep in mind also that this documentation is continuously being updated and modified SO Watch always out for the newest version 3 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 1 COPYRIGHT Copyright 2010 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia Nokia Connecting People and Nokia X and Y are trademarks or registered trademarks of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Under no circumstances shall Nokia be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable law no warranties of any Kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document
12. ft up and release the AV JACK Discard the AV JACK 4T Open up the device as shown and unscrew the four Torx size 4 screws in the order shown Do not use them again Discard them 20 Confidential Copyright O 2010 Nokia All rights reserved Nokia E7 00 RM 626 Service Manual Level 1 amp 2 44 Release also the WHITE COAX CABLE connector with the SS 231 Remove it with the tweezers 46 Use the tweezers to lift up and remove the POWER KEY Bodo ode _ 48 Turn the BASE CHASSIS ASSEMBLY to the other side as shown and unscrew the four size 4 screws in the order shown Do not use them again Discard them Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 49 Close the device Release the LID FRAME by lifting 50 Then release all the other sides and remove the up from one of its corners LID FRAME 51 Release the clip holding the WINDOW with the DENTAL TOOL a E 4 ia r ur ab M 4 AU y x Ht h F vial 78 j d T 2 2 4 1 L 53 Lift up the WINDOW very carefully with the SRT 6 54 Turn around the WINDOW While turning the from both sides Be careful not to damage the WINDOW be careful not to damage the WINDOW WINDOW flex Note that only the WINDOW has to be flex lifted The DISPLAY should remain on its place 21 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NIOKIA Care 9
13. ion 1 0 NOKIA Care Academy Service Manual Level 1 amp 2 19 Remove the QWERTY KEYMAT 20 Close the device and unscrew the four size 4 screws in the order shown These screws cannot be used again Discard them o o 21 To release the BACK COVER insert the SRT 6 22 Lift up and remove the BACK COVER between the BACK COVER and the BASE CHASSIS Then slide the SRT 6 to the direction shown Do this ONLY on LOCK KEY side a nta ee a A 1 EN 23 Lift up the BATTERY with the SRT 6 and remove it 24 Open the device as shown Release the CONNECTOR LOCK PLATE carefully with the dental tool Be careful not to injure yourself or the connector under the CONNECTOR LOCK PLATE with the sharp end of the dental tool 16 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care 9 Service Manual Level 1 amp 2 BEN i b SG tethers 25 Remove the CONNECTOR LOCK PLATE with the E connector with tweezers The CONNECTOR LOCK PLATE cannot be the dental tool Be careful not to damage the reused Discard it connector or any nearby components E E EEN 21 Close the device Open the three shown dips 28 The ANTENNA FRAME ASSEMBLY can be now holding the ANTENNA FRAME ASSEMBLY by using the separated SRT 6 29 Use the dental tool to lever out the IHF SPEAKER 30 Unscrew the two Torx size 4
14. n by qualified personnel only 2 Ensure all work is carried out at an anti static workstation and that an anti static wrist strap is worn Use only approved components as specified in the parts list 4 Ensure all components modules screws and insulators are correctly re fitted after servicing and alignment 5 Ensure all cables and wires are repositioned correctly 5 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy 3 ESD PROTECTION Service Manual Level 1 amp 2 Nokia requires that service points have sufficient ESD protection against static electricity when servicing the phone Any product of which the covers are removed must be handled with ESD protection The SIM card can be replaced without ESD protection if the product is otherwise ready for use To replace the covers ESD protection must be applied All electronic parts of the product are susceptible to ESD Resistors too can be damaged by static electricity discharge All ESD sensitive parts must be packed in metallized protective bags during shipping and handling outside any ESD Protected Area EPA Every repair action involving opening the product or handling the product components must be done under ESD protection ESD protected spare part packages MUST NOT be opened closed out of an ESD Protected Area For more information and local requirements about ESD protection and ESD Protected Area contact yo
15. ntly film pressing it with the SS 93 Be careful not to damage the connector or any nearby components y r rena fos Lig p gd 7 Pd reta D rived rur ehem SS 17 Attach the WINDOW flex adhesive by gently 18 Remove the SPACER FLEX LID adhesive pressing with the 55 93 Be careful to damage film the connector or any nearby components 21 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Nokia E7 00 Academy Service Manual Level 1 amp 2 pane _ 19 Place the SPACER FLEX by using the two 20 Connect t shown guiding pins Activate the SPACER FLEX LID adhesive by carefully pressing it with the SS 93 he DISPLAY connector with the SS 93 Be careful not to damage any nearby components A haar 21 Turn around DISPLAY Be careful not to damage the DISPLAY flex while turning the DISPLAY 23 Remove the DISPLAY protective film the WINDOW 28 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy Service Manual Level 1 amp 2 1 E nin YA k 25 Turn the WINDOW over While turning the 26 Press from side of the device as shown to lock WINDOW make sure that the WINDOW connector the shown clip holding the WINDOW in the LID stays connected and the WINDOW flex remains CHASSIS ASSEMBLY undamaged
16. o 38 Lower down the ENGINE BOARD and check that damage connector or any nearby components the guiding pin is aligned correctly 39 Check also the second guiding pin on the other 40 Use the SS 231 and the same procedure as side of the engine board before to connect the BLACK COAX CABLE connector to the connector marked with a letter B Au 41 Use the SS 231 to connect the WHITE COAX CABLE 42 Place the ENGINE BOARD FRAME ASSEMBLY onto connector to the connector marked with a letter W the ENGINE BOARD Press from the shown places to lock it to its place 31 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy Service Manual Level 1 amp 2 ee ee ir gt tm t eM t Mosi Sen EA Se p i Piers at 43 Finally press from shown place to lock the 44 P remaining holder Make sure that the cables are not Press the ANTENNA FRAME ASSEMBLY to lock the damaged while attaching the ENGINE BOARD FRAME shown three clips Be aware not to press from the ASSEMBLY IHF ADHESIVE area marked with red rectangle 12 Nem 45 Tighten the two TORX size 4 screws to the torque of 12 Ncm in the order shown shown Make sure the CAMERA MODULE guiding is aligned with the guiding in the camera gasket AT Press gently the CAMERA MODULE with the 5 93 48 Open up device
17. o need the SS 231 RF Connector tool 4 Place the AV JACK with the tweezers and push it with the SS 93 as shown to lock it in its place d ES y 3 E 5 Slide the 55 231 to direction shown to lock it to e the BLACK COAX CABLE connector Make sure BLACK COAX CABLE is connected to the shown connector 25 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 we 8 To connect the WHITE COAX CABLE use the same shown Make sure that the metal shell of the cable is procedure as with the BLACK COAX CABLE placed in the shown place 9 Carefully bend the WHITE COAX CABLE to its place 10 Place the WASHER to its place with the tweezers as shown Make also sure that the metal shell of the WHITE COAX CABLE is in the shown place TONM 11 Tighten the Phillips size 00 screw to the torque of 10 Nom cables are inside the CABLE COVER 26 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy Service Manual Level 1 amp 2 lt e 13 Open up the EARPIECE package Remove the 14 Use the shown guiding on the EARPIECE protective film WINDOW to place the EARPIECE with the tweezers and push it down with the SS 93 to activate the adhesive 15 Remove the WINDOW flex adhesive protective 16 Connect the WINDOW connector by ge
18. rne rne 8 6 EXPLODED VIEW 9 ER ES RR RRRRCR E 11 5 eE e 12 9 DISASSEMBLY INSTRUCTIONS 2 0 0 0 ccccsccccsrccsrcccscccsscessecesscccssccesscessccesscessccceseccesecesscccsccsccesccessceessceeees 13 10 ASSEMBLY INSTRUCTIONS wesciscciccsccesesccccsivccccavecessecasdcnccendsecasezccsdecwesces cesicecasactanccsxscsciucucscesisacdasucsxecaapactaninanuavevisicdaneers 25 COMPO m S E 38 2 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NOKIA Care Nokia E7 00 Academy Service Manual Level 1 amp 2 CHANGE HISTORY Approved 18 11 2010 First approved version The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKTA products This Service Manual is to be used only by authorized NOKIA service suppliers and the content of it is confidential Please note that provides also other guidance documents e g Service Bulletins for service suppliers follow these regularly and comply with the given instructions While every endeavor has been made to ensure the accuracy of this document some errors may exist If you find any errors or if you have further suggestions please notify NOKIA using the addr
19. screws in the order Remove the IHF SPEAKER with the tweezers shown Do not use them again Discard them 17 Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care M Academy Service Manual Level 1 amp 2 m 31 Open the three shown clips holding the ENGINE BOARD FRAME ASSEMBLY with the SRT 6 as shown 33 Use the RF connector tool S5 231 to release the 34 Then slide it to direction shown to lock it to the two coax cables First place the tool on top of the connector Pull up the SS 231 to release the cable cable 35 Use the same procedure on the second cable 36 Turn the ENGINE BOARD carefully around Open connector the UI FLEX connector with the SRT 6 Be careful not to damage the connector or nearby components 18 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy Service Manual Level 1 amp 2 38 Use the camera removal tool SS 210 to release the CAMERA MODULE Lift up and remove the CAMERA MODULE 39 Remove the CABLE COVER 40 Unscrew the shown Phillips size 00 screw This screw cannot be reused Discard it 41 Remove also the WASHER with the tweezers 42 Use the SS 231 to release the other end of the BLACK COAX CABLE 19 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Academy 43 Remove the BLACK COAX CABLE with the tweezers 45 Use the AV plug to li
20. ual Level 1 amp 2 Re 73 Remove the protective film from the back cover 74 Remove the lock key protective film 75 Test that the lock key is working by pushing it 76 Now the Nokia E7 00 assembly procedure is few times complete END OF ASSEMBLY 31 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 NOKIA Care Nokia E7 00 RM 626 Academy Service Manual Level 1 amp 2 11 SOLDER COMPONENTS 2 101 s 38 Confidential Copyright 2010 Nokia All rights reserved Version 1 0
21. ur local Nokia After Market Services representative Confidential Copyright 2010 Nokia All rights reserved Version 1 0 NIOKIA Care R626 Academy Service Manual Level 1 amp 2 4 CARE AND MAINTENANCE This product is of superior design and craftsmanship and should be treated with care The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years e Keep the phone and all its parts and accessories out of the reach of small children e Keep the phone dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits e Do not use or store the phone in dusty dirty areas Its moving parts can be damaged e Do not store the phone in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics e Do not store the phone in cold areas When it warms up to its normal temperature moisture can form inside which may damage electronic circuit boards e Do not drop knock or shake the phone Rough handling can break internal circuit boards Do not use harsh chemicals cleaning solvents or strong detergents to clean the phone Do not paint the phone Paint clog the moving parts and prevent proper operation e Use only the supplied or an approved replacement antenna Unauthorised antennas modifications or attachments could damage the phone and ma
22. y violate regulations governing radio devices All of the above suggestions apply equally to the product battery charger or any accessory 7 Confidential Copyright O 2010 Nokia All rights reserved Version 1 0 Care R626 Academy Service Manual Level 1 amp 2 5 BATTERY INFORMATION Note A new battery s full performance is achieved only after two or three complete charge and discharge cycles The battery can be charged and discharged hundreds of times but it will eventually wear out When the operating time talk time and standby time is noticeably shorter than normal it is time to buy a new battery Use only batteries approved by the phone manufacturer and recharge the battery only with the chargers approved by the manufacturer Unplug the charger when not in use Do not leave the battery connected to a charger for longer than a week since overcharging may shorten its lifetime If left unused a fully charged battery will discharge itself over time Temperature extremes can affect the ability of your battery to charge For good operation times with Ni Cd NiMh batteries discharge the battery from time to time by leaving the product switched on until it turns itself off or by using the battery discharge facility of any approved accessory available for the product Do not attempt to discharge the battery by any other means Use the battery only for its intended purpose Never use any charger or battery which is damag
Download Pdf Manuals
Related Search