CP-RIO6-Ax/Bx User Guide, Rev. 2.0
Contents
1. Introduction CP RIO6 Ax Bx ge This page has been intentionally left blank Page 1 2 ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction 1 Introduction 1 1 Board Overview The CP RIO6 Ax Bx 6U CompactPCI rear transition module has been designed for use with Kontron 6U CompactPCI CPU boards and provides comprehensive rear I O functionality for peripherals In order to use the CP RIO6 Ax Bx a special 6U CompactPCI backplane with rear VO support as well as a compatible and correctly configured CPU board are required There are four modules described in this user guide CP RIO6 A CP RIO6 A216 CP RIO6 B and CP RIO6 B216 All four modules provide various data communication and multimedia in terfaces as well as support for two optional USB 2 0 NAND Flash modules and four external SATA devices The CP RIO6 Ax Bx comes with four USB 2 0 ports four onboard SATA ports two COM ports and an HD audio codec supporting five audio ports such as one onboard CD In port one Mic In port one Line In port one Line Out port and one S P DIF Out port Further more the CP RIO6 A and the CP RIO6 A216 are equipped with one VGA CRT port on the front panel The CP RIO6 B and the CP RIO6 B216 provide a DVI D port and a HDMI port on the front panel In addition the CP RIO6 A and the CP RIO6 B are equipped with two Gigabit Ethernet ports on the front panel The CP RIO6 Ax Bx has three CompactPCI connectors for connecting the CP RIO6 Ax Bx to the2. please follow only the instructions supplied by the present manual Keep all the original packaging material for future storage or warranty shipments If it is necessary to store or ship the board please re pack it as nearly as possible in the manner in which it was delivered Special care is necessary when handling or unpacking the product Please consult the special handling and unpacking instruction on the previous page of this manual Page xii ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Preface Two Year Warranty Kontron grants the original purchaser of Kontron s products a TWO YEAR LIMITED HARDWARE WARRANTY as described in the following However no other warranties that may be granted or implied by anyone on behalf of Kontron are valid unless the consumer has the express written consent of Kontron Kontron warrants their own products excluding software to be free from manufacturing and material defects for a period of 24 consecutive months from the date of purchase This warranty is not transferable nor extendible to cover any other users or long term storage of the product It does not cover products which have been modified altered or repaired by any other party than Kontron or their authorized agents Furthermore any product which has been or is sus pected of being damaged as a result of negligence improper use incorrect handling servicing or maintenance or which has been damaged as a result of excessive current vo
3. backplane 1 2 CP RIO6 Ax Bx Feature Comparison The following table provides a feature comparison of the CP RIO6 Ax Bx Table 1 1 CP RIO6 Ax Bx Feature Comparison CP RIO6 A CP RIO6 A216 CP RIO6 B CP RIO6 B216 VGA X X DVI D X X HDMI X X 2x GbE X X a D COM1 X X X X c 2x USB 2 0 X X X X c Mic In X X X X Line In X X X X Line Out X X X X S P DIF Out X X X X COM X X X X o 2x USB 2 0 NAND Flash X X X X a 4x SATA X X X X ge 8 CD In X X x x 2 o Internal Line Out Mono X X X X 2x FAN X X X X ID 1030 8996 Rev 2 0 Page 1 3 Introduction 1 3 Board Diagrams CP RIO6 Ax Bx The following diagrams provide additional information concerning the boards functionality and component layout 1 3 1 Functional Block Diagrams Figure 1 1 CP RIO6 A CP RIO6 A216 Functional Block Diagram Serial HD Audio Stereo input Controller Driver co Page 1 4 Stereo input Stereo output ein se input Onboard Connector Front Panel Connector ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction Figure 1 2 CP RIO6 B CP RIO6 B216 Functional Block Diagram Digital output tine Stereo input St
4. 1 10 1 1 J2 FAN1 J1 FAN2 SATA CD in Internal J10 1 Line Out Mono 1 2 J20 COM1 S P DIF Out ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction 1 4 Technical Specification Table 1 2 CP RIO6 Ax Bx Main Specifications CP RIO6 Ax Bx SPECIFICATIONS VGA One VGA interface on a 15 pin D Sub connector J22 for connecting a CP RIO6 A CP RIO6 A216 standard analog monitor DVI D One DVI D interface digital only on a 29 pin DVI connector J23 for CP RIO6 B CP RIO6 B216 connecting a monitor with a DVI D interface HDMI One HDMI interface on a 19 pin HDMI connector J21 for connecting a g CP RIO6 B CP RIO6 B216 Monitor with a HDMI interface 5 Ethernet Two Gigabit Ethernet interfaces implemented as a dual RJ 45 connector CP RIO6 A CP RIO6 B J19A B E COMI One serial RS 232 port on a 9 pin D Sub connector J20 5 USB Two USB 2 0 interfaces on type A connectors J17 and J18 LL HD Audio AD1884A HD audio codec supporting the following ports e Mic In stereo port on a 3 5 mm stereo jack pink J16 e Line In stereo port on a 3 5 mm stereo jack blue J16 e Line Out stereo port on a 3 5 mm stereo jack green J16 e _S P DIF Out digital port on an optical fiber connector Toslink J15 The CP RIO6 Ax Bx provides no audio jack detection support SATA Four SATA interfaces implemented as onboard connectors J8 J9 J12 and J13 for connecti
5. 6 Rev 2 0 CP RIO6 Ax Bx Preface 1 1 1 2 1 3 1 4 1 5 1 6 1 7 2 1 2 2 2 3 2 4 2 5 2 6 27 2 8 2 10 2 11 2 12 2 13 2 14 2 15 List of Figures CP RIO6 A CP RIO6 A216 Functional Block Diagram 1 4 CP RIO6 B CP RIO6 B216 Functional Block Diagram 1 5 CP RIOGAxBx Front Panels iscsi Sic z sika slov Radko ia 1 6 CP RIO6 A Board Layout Front View ee 1 7 CP RIO6 A216 Board Layout Front View 1 8 CP RIO6 B Board Layout Front View ER RR rn 1 9 CP RIO6 B216 Board Layout Front View 1 10 USB Connectors J17 and J18 see ED N N radn lk DE RE in 2 3 USB NAND Flash Connectors J7 and 2 4 Serial Port Connector 420 COMTE 2 5 Serial Port Connector JE COME renee ara 2 6 D Sub VGA Connector JEL iaia 2 7 EVI onnet et Ee ED eee 2 8 HDMI Connector J21 slice 2 9 Gigabit Ethernet Connectors J19A B tessssssssccccccccseeeeeesssssesseesssnnennnees 2 10 Triple Audio SACI E 2 13 S P DIF Out Connector 15 ss eegen 2 13 GEEN Connector EE 2 13 Internal Line Out Mono Connector Jm 2 13 Fan Control Connectors J1 and J2 iii 2 14 SATA Connectors J8 J9 J12 and J13 ees AE EE EE EE EE ee 2 14 Rear VO CompactPCI Connectors rJ3 rJ4 and rJ5 2 15 ID 1030 8996 Rev 2 0 Page vii Preface CP RIO6 Ax Bx This page has been inten
6. B NAND Flash module CP RIO6 B216 227 g without USB NAND Flash module gt Page 1 12 ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx 1 5 Standards Introduction The CP RIO6 Ax Bx complies with the requirements of the following standards Table 1 3 Standards for the CP RIO6 Ax Bx TYPE ASPECT STANDARD REMARKS CE Emission EN55022 EN61000 6 3 Immission EN55024 EN61000 6 2 Electrical Safety EN60950 1 Mechanical Mechanical Dimen IEEE 1101 10 sions Environmental Climatic Humidity IEC60068 2 78 93 RH at 40 C non condensing WEEE Directive 2002 96 EC Waste electrical and electronic equipment RoHS Directive 2002 95 EC Restriction of the use of certain hazardous substances in electrical and electronic equipment Vibration IEC61131 2 Test parameters Sinusoidal IEC60068 2 6 5 150 Hz frequency range e 1 g acceleration e 1 oct min sweep rate e 10 cycles axis e 3 axes Single Shock IEC61131 2 Test parameters IEC60068 2 27 e 15 g acceleration e 11 ms pulse duration 3 shocks per direction 6 directions 5 s recovery time Note ID 1030 8996 Rev 2 0 Kontron performs comprehensive environmental testing of its products in accor dance with applicable standards Customers desiring to perform further environmental testing of Kontron prod ucts must contact Kontron for assistance prior to performing any such testing This is necess
7. G kontron User Guide CP RIO6 A CP RIO6 B CP RIO6 A216 CP RIO6 B216 6U CompactPCI Rear Transition Modules Doc ID 1030 8996 Rev 2 0 May 11 2011 If its embedded its Kontron Preface CP RIO6 Ax Bx Revision History Publication Title CP RIO6 A CP RIO6 B CP RIO6 A216 CP RIO6 B216 6U CompactPCI Rear Transition Modules 1030 8996 1 0 Initial issue 4 Jun 2009 1 1 General update changes to Chapter 2 1 7 HD Audio Interfaces 10 Sep 2009 2 0 General update 11 May 2011 Imprint Kontron Modular Computers GmbH may be contacted via the following MAILING ADDRESS TELEPHONE AND E MAIL Kontron Modular Computers GmbH 49 0 800 SALESKONTRON SudetenstraBe 7 sales kontron com D 87600 Kaufbeuren Germany For further information about other Kontron products please visit our Internet website www kontron com Disclaimer Copyright 2011 Kontron AG All rights reserved All data is for information purposes only and not guaranteed for legal purposes Information has been carefully checked and is believed to be accurate however no responsibility is assumed for inaccuracies Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective own ers and are recognized Specifications are subject to change without notice Page ii ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Preface Table of Contents FAG VISIOR oes
8. afety requirements It was also designed for a long fault free life However the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation Therefore in the interest of your own safety and of the correct operation of your new Kontron product you are requested to conform with the following guidelines For Your Safety High Voltage Safety Instructions Warning All operations on this device must be carried out by sufficiently skilled personnel only Caution Electric Shock Before installing a not hot swappable Kontron product into a system always ensure that your mains power is switched off This applies also to the installation of piggybacks Serious electrical shock hazards can exist during all installation repair and maintenance operations with this product Therefore always unplug the power cable and any other cables which provide external voltages before performing work Special Handling and Unpacking Instructions ESD Sensitive Device Electronic boards and their components are sensitive to static elec tricity Therefore care must be taken during all handling operations and inspections of this product in order to ensure product integrity at all times Do not handle this product out of its protective enclosure while it is not used for operational purposes unless it is otherwise protected Whenever possible unpack or pack this product only at EOS ESD safe wor
9. ary as it is possible that environmental testing can be destructive when not performed in accordance with the applicable specifications In particular for example boards without conformal coating must not be exposed to a change of temperature exceeding 1K minute averaged over a period of not more than five minutes Otherwise condensation may cause irre versible damage especially when the board is powered up again Kontron does not accept any responsibility for damage to products resulting from destructive environmental testing Page 1 13 Introduction CP RIO6 Ax Bx 1 6 Related Publications The following publications contain information relating to the CP RIO6 Ax Bx Table 1 4 Related Publications PRODUCT PUBLICATION CompactPCI Systems and CompactPCl Specification 2 0 Rev 3 0 Boards CompactPCI Packet Switching Backplane Specification PICMG 2 16 Rev 1 0 CP RIO6 A216 CP RIO6 B216 Kontron CompactPCI Backplane Manual ID 24229 HD Audio Intel s High Definition Audio Specification Rev 1 0 April 15 2004 All Kontron products Product Safety and Implementation Guide ID 1021 9142 Page 1 14 ID 1030 8996 Rev 2 0
10. ereo input Controller Onboard Front Panel Driver Connector Connector ID 1030 8996 Rev 2 0 Page 1 5 Introduction CP RIO6 Ax Bx 1 3 2 Front Panels Figure 1 3 CP RIO6 Ax Bx Front Panels Mic In Mic In Mic In Mic In S P DIF Out Line Out Line In S P DIF Out Line Out Line In S P DIF Out Line Out Line In S P DIF Out Line Out Line In CP RIO6 A CP RIO6 A216 CP RIO6 B CP RIO6 B216 Page 1 6 ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction 1 3 3 Board Layout Figure 1 4 CP RIO6 A Board Layout Front View 1 SATA J9 7 1 me 7 1 J8 SATA LI SR KI Na USB NAND Flash J2 D IP Fan Ee Out 1 J1 Internal J10 A FAN2 Line Out Mono 1 2 1 ID 1030 8996 Rev 2 0 Page 1 7 Introduction CP RIO6 Ax Bx Figure 1 5 CP RIO6 A216 Board Layout Front View Page 1 8 1 1 J2 FAN1 J1 FAN2 CD In i Internal J10 Ki Line Out Mono 1 2 S P DIF Out ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction Figure 1 6 CP RIO6 B Board Layout Front View J2 1 FAN1 Ji Internal J10 FAN2 Line Out Mono 1 2 1 ID 1030 8996 Rev 2 0 Page 1 9 Introduction CP RIO6 Ax Bx Figure 1 7 CP RIO6 B216 Board Layout Front View Page
11. k stations Where a safe work station is not guaranteed it is important for the user to be electrically discharged before touching the product with his her hands or tools This is most easily done by touching a metal part of your system housing It is particularly important to observe standard anti static precautions when changing piggy backs ROM devices jumper settings etc If the product contains batteries for RTC or memory backup ensure that the board is not placed on conductive surfaces including anti static plas tics or sponges They can cause short circuits and damage the batteries or conductive circuits on the board ID 1030 8996 Rev 2 0 Page xi Preface CP RIO6 Ax Bx General Instructions on Usage In order to maintain Kontron s product warranty this product must not be altered or modified in any way Changes or modifications to the device which are not explicitly approved by Kontron and described in this manual or received from Kontron s Technical Support as a special handling instruction will void your warranty This device should only be installed in or connected to systems that fulfill all necessary technical and specific environmental requirements This applies also to the operational temperature range of the specific board version which must not be exceeded If batteries are present their temperature restrictions must be taken into account In performing all necessary installation and application operations
12. lications annen 1 14 2 1 USB Connectors J17 and J18 Pinout ee Re nn nn Ee 2 3 2 2 USB NAND Flash Connectors J7 and J11 Pinout 2 4 2 3 Serial Port Connector J20 COM1 Pinout RS 232 2 5 2 4 Serial Port Connector J6 COM2 Pinout RS 232 RS 422 2 6 2 9 D Sub VGA Connector J22 Pinout wenende 2 7 2 6 DVI Connector J23 Pinout teste ie Re ke Zl dai 2 8 2 7 HDMI Connector J21 Piotr 2 9 28 Pinout of GbE Connector J19A B iii 2 10 2 9 MD Audio Specifications un ee an 2 11 2 10 CD In Connector J14 Pinout ee ee ee Re ee ee ee ee ee ee ee 2 13 2 11 Internal Line Out Mono Connector J10 Pinout nnee 2 13 2 12 Fan Control Connectors J1 and J2 Pinot 2 14 2 13 SATA Connectors J8 J9 J12 and J13 Pinout ees ee ee ee ee ee ee 2 14 2 14 Rear VO CompactPCI Rear VO Connector rJ3 Pinout 2 16 2 15 Rear VO CompactPCI Rear VO Connector rJ3 Signals 2 17 2 10 BD Sales nis EE ed ie ee ED DE eN ee 2 17 2 17 Bits ID4 and DSS 2 17 2 18 Rear VO CompactPCI Rear VO Connector rJ4 Pinout 2 18 2 19 Rear VO CompactPCI Rear VO Connector rJ5 Pinout 2 19 2 20 Rear VO CompactPCI Rear VO Connector rJ5 Signals 2 20 ID 1030 8996 Rev 2 0 Page v Preface CP RIO6 Ax Bx This page has been intentionally left blank Page vi ID 1030 899
13. ltage or tem perature or which has had its serial number s any other markings or parts thereof altered de faced or removed will also be excluded from this warranty If the customer s eligibility for warranty has not been voided in the event of any claim he may return the product at the earliest possible convenience to the original place of purchase togeth er with a copy of the original document of purchase a full description of the application the product is used on and a description of the defect Pack the product in such a way as to ensure safe transportation see our safety instructions Kontron provides for repair or replacement of any part assembly or sub assembly at their own discretion or to refund the original cost of purchase if appropriate In the event of repair re funding or replacement of any part the ownership of the removed or replaced parts reverts to Kontron and the remaining part of the original guarantee or any new guarantee to cover the repaired or replaced items will be transferred to cover the new or repaired items Any exten sions to the original guarantee are considered gestures of goodwill and will be defined in the Repair Report issued by Kontron with the repaired or replaced item Kontron will not accept liability for any further claims resulting directly or indirectly from any warranty claim other than the above specified repair replacement or refunding In particular all claims for damage to a
14. nen ee Re ee ee ee ee 2 10 2 1 7 HD Audio Interfaces ui es Ee tenen 2 11 2 1 7 1 HD Audio Specifications ana EE EE EE NEK ERK AKA 2 11 2 1 7 2 gt Mie ln Line In and Line Out Interfaces 2 13 2d S P DIF Out Interface sissies aie N ED AN EE SE se N 2 13 2 1 7 4 CD in Interface RE RE ER ble ae N Re 2 13 2 1 7 5 Internal Line Out Mono Interface 2 13 2 1 8 AN Connectors li 2 14 2 1 9 DENA ATA Interfaces nisi 2 14 2 1 10 Rear VO Interface on CompactPCI Connectors rJ3 rJ4 and rJ5 2 15 2 1 10 1 States of ID Bits es Ar ee maa be Ee 2 17 i Scion E E E 3 3 3 1 Safety Requirements anneer tenen 3 3 3 2 Initial Installation Procedures ii 3 4 3 3 Standard Removal Procedures sus eds ss ks n Se se ee DE Ne OE SE EEN ens 3 5 3 4 Installation of Peripheral Devices 3 5 3 4 1 USB Device Installation ss kes EE N Ri ES ES RS KEN Ee NE GE ee es 3 5 342 USB 2 0 NAND Flash Module Installation 3 6 3 4 3 Installation of External Serial ATA Devices 3 6 Page iv ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Preface List of Tables 1 1 CP RIO6 Ax Bx Feature Comparison ee RA AA nennen nen ennenenvenn 1 3 1 2 CP RIO6 Ax Bx Main Specifications ie RA ennen nennen nennen 1 11 1 3 Standards for the CP RIO6 Ax BX ee ee ee ee ER Ee ee ee ee ee ee ee ee 1 13 1 4 Related Pub
15. ng external SATA devices via a SATA cable USB Two onboard connectors J7 and J11 for connecting two USB 2 0 NAND o Flash modules o S COM One onboard serial port implemented as a 10 pin 2 54 mm connector J6 HD Audio AD1884A HD audio codec supporting the following ports E e CD In stereo port on a 4 pin onboard connector J14 E e Internal line out mono port on a 2 pin onboard connector J10 c Fan Two fan connectors J1 and J2 with PWM control and sense inputs for monitoring the fan speed CompactPCl Three CompactPCI connectors rJ3 rJ4 and rJ5 for connecting the CP RIO6 Ax Bx to the backplane ID 1030 8996 Rev 2 0 D Page 1 11 Introduction CP RIO6 Ax Bx Table 1 2 CP RIO6 Ax Bx Main Specifications Continued CP RIO6 Ax Bx SPECIFICATIONS Temperature Range Operational 0 C to 60 C Standard 40 C to 85 C E2 optional Storage 55 C to 85 C Without any additional components Note When additional components are installed refer to their operational specifications as this will influ ence the modules operational and storage tem perature S MTBF 750253 h MIL HDBK 217 FN2 Ground Benign 30 1262748 h Bellcore Issue 6 Ground Benign 30 Mechanical 6U 4HP CompactPCl compliant form factor Dimensions 233 35 mm x 80 mm Board Weight CP RIO6 A 227 g without USB NAND Flash module CP RIO6 A216 223 g without USB NAND Flash module CP RIO6 B 231 g without US
16. ny system or process in which the product was employed or any loss incurred as a result of the product not functioning at any given time are excluded The extent of Kontron liability to the customer shall not exceed the original purchase price of the item for which the claim exists Kontron issues no warranty or representation either explicit or implicit with respect to its products reliability fitness quality marketability or ability to fulfil any particular application or purpose As a result the products are sold as is and the responsibility to ensure their suitability for any given task remains that of the purchaser In no event will Kontron be liable for direct indirect or consequential damages resulting from the use of our hardware or software products or documentation even if Kontron were advised of the possibility of such claims prior to the purchase of the product or during any period since the date of its purchase Please remember that no Kontron employee dealer or agent is authorized to make any modification or addition to the above specified terms either verbally or in any other form written or electronically transmitted without the company s consent ID 1030 8996 Rev 2 0 Page xiii Preface CP RIO6 Ax Bx This page has been intentionally left blank Page xiv ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Introduction Chapter Introduction D ID 1030 8996 Rev 2 0 Page 1 1
17. ordance with applicable country state or local laws or regulations ID 1030 8996 Rev 2 0 Page ix Preface CP RIO6 Ax Bx Explanation of Symbols Caution Electric Shock A This symbol and title warn of hazards due to electrical shocks gt 60V when touching products or parts of them Failure to observe the pre cautions indicated and or prescribed by the law may endanger your life health and or result in damage to your material Please refer also to the section High Voltage Safety Instructions on the following page Warning ESD Sensitive Device This symbol and title inform that electronic boards and their compo nents are sensitive to static electricity Therefore care must be taken during all handling operations and inspections of this product in order to ensure product integrity at all times Please read also the section Special Handling and Unpacking Instructions on the following page Warning This symbol and title emphasize points which if not fully understood and taken into consideration by the reader may endanger your health and or result in damage to your material Note This symbol and title emphasize aspects the reader should read through carefully for his or her own advantage sv Page x ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Preface Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical s
18. sicilia il ap di EE tata as OE NG li TOS CV ANTE fee eea li Table e ili HIS TES deden ln ee ee PE OE EE N RA EE EES V List of ie vii Proprietary Note N OE aaa ix TT I OE OE N EL EE deon N N ix Environmental Protection Statement anssen ens ix Explanation Di SYIMDOMS siii X For YoUr Salty ppi xi High Voltage Safety Instructions osetia kk de xi Special Handling and Unpacking Instructions nnnnnnnnnnnennnennnneneeeennnnnneeennn xi General Instructions on Usage sis EES Re iaia xii Two Year Warranty siii iii xiii 1 Introduction ER rr 1 3 LI BON OVERVIEW EE 1 3 1 2 CP RIO6 Ax Bx Feature Comparison nana RA AR AA AA ee ee 1 3 N s se piccione 1 4 1 3 1 Functional Block Diagrams eek ARE AN akade eN REEN ES ns gens 1 4 Les Front Panels ee desi 1 6 1 3 3 Board Ne 1 7 14 Technical Specification sis EER ol alla oe N N ENG NG ENG RS 1 11 ps eae cig a EE N EE OE e 1 13 1 6 Related Publications E 1 14 2 Functional Description eenzznnzznnnnnnnnnnnnnnnnnnnnnn n 2 3 2 1 Board Interfaces ll 2 3 21 1 MISS TINCT ACES ane 2 3 2 1 1 1 Front Panel USB 2 0 Interface ann nnee ee ee ee 2 3 2 1 1 2 Onboard USB 2 0 NAND Flash Interface 2 4 2 1 2 GON al o ERNEA Ea EE 2 5 ID 1030 8996 Rev 2 0 Page iii Preface CP RIO6 Ax Bx 21 3 VOA salata 2 7 214 DVI D Interface mees Se oi RS GER non 2 8 2 0 PRIM TOTO ER Re N Se ol 2 9 2 1 6 Gigabit Ethernet Interfaces nnnnnnnnennenennnn en
19. tionally left blank Page viii ID 1030 8996 Rev 2 0 CP RIO6 Ax Bx Preface This document contains information proprietary to Kontron It may not be copied or transmitted by any means disclosed to others or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents Proprietary Note The information contained in this document is to the best of our knowledge entirely correct However Kontron cannot accept liability for any inaccuracies or the consequences thereof or for any liability arising from the use or application of any circuit product or example shown in this document Kontron reserves the right to change modify or improve this document or the product described herein as seen fit by Kontron without further notice Trademarks Kontron the PEP logo and if occurring in this manual CXM are trademarks owned by Kon tron Kaufbeuren Germany In addition this document may include names company logos and trademarks which are registered trademarks and therefore proprietary to their respective owners Environmental Protection Statement This product has been manufactured to satisfy environmental protection requirements where possible Many of the components used structural parts printed circuit boards connectors batteries etc are capable of being recycled Final disposition of this product after its service life must be accomplished in acc
Download Pdf Manuals
Related Search