iDVR Digital Video Surveillance System User Guide
Contents
1. IRIS CLOSE ZOOM WIDE ZOOM TELE 1 Control PTZ or Speed Dome the first auxiliary switch preset points 2 Control PTZ or Speed Dome the second auxiliary switch preset points a Control PTZ or Speed Dome the third auxiliary switch preset points Login System Click Button User admin Password Default is empty After login in the system user can set the password Click the button Login to enter the system X Note After the first login please enter the user settings page Fig 14 to set the admin user password Introduction the right mouse button function Fullscreen Previous page Hecht page Page auto cycle Window rearrangement Audio Preview Hand record All hand record Setup Review Snapshot Shield Log oft Process minimize Exit PTZ Setup Dome preset E Map Chat Log Network Info Version Info Fig 5 FullScreen Fullscreen monitoring Next page Preview the next page of the video Page auto cycle Preview the video auto cycle Window rearrangement Order to restore the default video display window Audio Start stop monitoring the voice of the currently selected channel Hand record Select the current channel to start stop manual video All Hand record Select the all channel to start stop manual video Setup Setup the supervisory system Review Open the player review the record files Snapshot Snap the imag2. oom ek 4 Preset i i est Fig 3 PTZ UP PTZ DOWN PTZ LEFT PTZ RIGHT PTZ AUTO FOCUS FAR FOCUS NEAR IRIS OPEN IRIS CLOSE ZOOM WIDE ZOOM TELE R Control PTZ or Speed Dome the first auxiliary switch preset points 2 Control PTZ or Speed Dome the second auxiliary switch preset points a Control PTZ or Speed Dome the third auxiliary switch preset points 1 3 Login System Click the login button and that will appear the following dialog box Log on SE When the software used for the first time you can only use the admin login user name no password the account with super user permissions login below to access a list of monitoring points set up monitor screen settings system settings and user settings as follows Introduction the right mouse button function Connect the server Connect again DisConnect Close Connect Motion Detect Copy to all channels Fullscreen All hand record Chat Server List Disconnect all Process minimize 1 4 1 Connect the specify server Connect the server oppe again Disconnect Close connect Receive motion detect From server Copy to all channels Fullscreen All hand record Chat Server list Disconnect All Process minimize Connect the server quickly see 1 4 1 connect the server Continue the connection with the same channel of the last server if the last vid
3. Otherwise Show the name and date of access time for non transparent Note The channel name and the date of the location can drag the mouse to the right screen name and the date of the time 2 1 5 TV output Set the TV output circulartime by the slider 2 1 6 Button function description Button default value for the current channel selected for the system set up to restore the default state Button Copy to all for the current channel parameters of all the settings are copied to all other channels Video section 2 1 7 Channel drop down menu used to select the channel to modify it 2 1 8 No video signal when the voice alarm V That the current channel sound without video signal 2 1 9 Video quality settings Rate Control Model For the current channel rate control approach Dynamic Stream According to the actual video stream record Fixed Stream Used arbitrarily set to the video stream Mixed Stream When the stream is greater than the actual settings of the system stream into the set up code enforcement to reduce the bit stream Video Quality Selected for the current channel set video video quality divided into the best better in general poor worst such as 5 the user can according to different environment different set of needs Frame rate Selected for the current channel set video frames PAL 1 25 frame sec NTSC 1 30 Space constraints Selected for the current channel settings video file size of the maximum
4. Automatic pop up E map when alarm Remote network PSTN ISDN ADSL DDN INTENET Fiber Network functions Real time monitoring remote playback remote recording remote control cloud mirror remote video attribute adjustment Remote Alarm Voice prompts images text prompts Remote Control Video remote control monitoring PTZ and so on remote control of the network server shutdown or restart System Protection Multi level password management automatic power Shutdown not the loss of video information call the restoration of the video starts automatically and turn off the automatic restart procedure to realize unmanned Seamless connectivity Replace video file to use of seamless connectivity to ensure that video is not dropped frames
5. X 0 280 Y 0 270 adjustable video frame stored in the camera name display brightness adjustable adjustable transparency Shield function Screen located 128 64 and 64 32 the size of the Shielding region the location X 0 220 Y 0 220 adjustable stored in the video screen the screen background color adjustable Record Mode Regular video manual video alarm video dynamic video boot auto start video Record Quality The quality of each and every way the best better in general poor worst arbitrary adjustable Video Media IDE SATA hard drive capacity limitation Search Playback Retrieved by date time and list of files multi screen broadcast at the same time single frame playback fast playback slow playback continuous playback on time Single screen zoom partial zoom and other functions Save a single picture remote playback Backup Can backup to another hard disk or burn print image data PTZ Control Terminal through the RS 232 to 485 communications connect the camera to control PTZ decoder to achieve cloud mirror control Dynamic Perception Sensing region 99 can be set 9 adjustable sensitivity adjustable video duration to support pre video feature Alarm mode Video loss alarm alarm signal from the alarm linked to a number of cameras alarm time continuous video is adjustable linkage alarm output and alarm output can be more than a row at the same time the output time adjustable
6. book to set Settings in the software and pay attention to setting the course of the attention The first use of the software system known as the initial user admin no password users log in please set the admin user s password settings for a particular set of channels are of immediate effect The first time you set the video store page of video data such as storage disk it is suggest that users restart the software after the completion of monitoring software and do not change the option of this setting page arbitrarily This set of information related to the integrity of the video Must be properly set up alarm decoder and the port number default decoder using COM1 alarm using COM2 suggest that users do not change When you add a user please select the user s permissions carefully add users to avoid undue authority In order to ensure long term and stable system operation please restart the software operation after finishing setting Important statement If the operator does not read the instruction book carefully there is no statement in accordance with the operation of the steps leading to system instability data loss such as video anomalies by themselves Our company does not undertake any responsibility Login System Monitoring system is installed double click on the Windows desktop iDVR Server icon enter the monitoring system boot interface as shown in Figure 1 K e 2 Init v
7. conventional player Image playback can be carried out to capture function files backup document editing functions Fete 4 D Remote monitoring remote PTZ control color video manual shield and unshield restart your computer such as control Support the current maximum capacity of hard disk also several large hard disk at the same time Hard disk management can use the hard disk of the largest and the smallest hard disk space set aside to enable the hard disk can be fully justified to use Automatically creates a log file user logs system logs remote control log easily search for record of the operation System shutdown can be set from time to time time to resume function to ensure high stability of the system Can be set to run automatically start monitoring software power automatically shut down procedures calls automatically restart automatic restoration of the video The System has been rigorously tested stable and reliable The System hardware configuration requires low 32 channel video is displayed at the same time CPU occupancy rate of below 50 The System can effectively prevented the system to collapse from repeating operation of the user monitoring system Contents Fete 2 p D Server Operating System Notices Please read instruction book carefully before operating Please do as instruction book strictly in the process of software please refer to instruction
8. i TD T Ka Mo Firin pi NO Ona EE H E E OEST SEN STS OO E a a E E beten Apply Fig 10 2 3 1 Channel Used to select the channel to modify it 2 3 2 Motion detection sensitivity The sensitivity of motion detection system Range 1 9 1 is the most sensitive 9 as the most insensitive suggest that values is 2 2 3 3 The length of pre video Motion is detected before time video 5 20s 2 3 4 The length of time delay video it will sustain video the time 5 20s after the video system stop 2 3 5 Motion triggered the voice When motion is detected it will sound 2 3 6 Once trigger the sound and never stop when trigger the sound Need to manually clear sound 2 3 7 Snap Motion is detected Click snap setting enter the interval and number of snap setting 2 3 8 Write Alarm log Motion is detected write the event into alarm log 2 3 9 enlarge the screen Motion is detected enlarge the screen 2 3 10 Motion triggered the alarm When motion is detected it will alarm 2 3 11 Output to the alarm box Check the trigger the alarm click the output to the alarm box pop up alarm output setting page select one channel then select the channel number of the alarm output click OK to set effect So set the other channel alarm output 2 4 Network Setup Click Network Setup tags access to the Network parameters settings Fig 13 PTZ User Manage System Info Copy to all smtp 16
9. the button becomes inactive 10 F Fast Speed up the playback speed of the document Continue to click on the button playback speed document Sustainable Playback speed in normal circumstances click the button total of 4 times the button becomes inactive Ii wa Previous frame The screen of the current players to play back one frame if the screen is playing and it will be automatically suspended so that players documents remain in the back one frame of the screen p Ram Latter frames The window of the current players to forward one frame if the window is in play and will be automatically suspended so that players documents remain in the forward one frame of the screen 13 Editing Intercept part of the video file playing in the screen of the current players to save as the user specified directory The operation see details of document editing 14 Voice switch Open or close the voice of the video file Open the sound only the Current Play screen will be broadcast to play sound 15 ae Backup File backup feature Click the Backup button the pop up the DVR video recording document to transfer the code backup dialog box as shown below wits MPEGI CD Ce AVI fxvID s00 Kbps WAVE 1102SHz 8bits Awit 0 EUR none Gini Re Click the source document input button pop up the search input file dialog box found the need transfer file increased to t
10. 3 com digitalyidea digitalvideo 163 com digitalidvr 163 com digitalvideodvi 163 com H Es Fig 13 2 4 1 Channel Used to select the channel to modify it X Note in the video attribute settings the selected channel if the current preview is not enabled then the currently selected channel ts also monitored through the network 2 4 2 IP address Verification After check the IP address can be specified to allow the network to monitor the IP has not been added and it will not be allowed to monitor Click Copy to all the IP address can be allowed to monitor all channels 2 4 3 User Password Authentication After check they can enter a user name and password to check the network connection Click Copy to all the username and password can be checked the network connection when connected all other channels 2 4 4 Network port Specify the corresponding port Server Client connects to the server port default is 5060 Client receives alarm port Client receive the alarm port default is 5061 Remote playback port Remote playback video files on the server port default is 5062 Web Port IE Client connects server port default is 80 when Client connects the server through IE you must select Start Web server Otherwise you couldn t connect the server 2 4 5 Server Domain Name Show the server domain name We can connect to the server through the domain name if the video card exception t
11. IDVR Digital Video Surveillance System User Guide Notices Please read the relevant prospectus before using the monitoring system you could not use this goods until you know the function of everything part of it it just ensured that there is a best function on it Otherwise everything is at your peril The host system power supply voltage of 220 volts 10 if the voltage is instable or interference from other accidents you choose high quality power ie UPS to ensure a good working system On the system host shall work at the room temperature 10 3 55 2 C a clean environment and keep it a good ventilation The system belongs to Our company s proprietary software products please do not copy without permission otherwise we will not be responsible for the stability of the machine meanwhile we will pursue copyright piracy through the legal channels Hardware configuration requirements Server CPU More than Celeron 2G Recommended 1 8G dual core or more DDR More than 256M Recommended DDR1G Graphic Card 32M Support Overlay Recommended 256M Network Card 10 100M Display Resolution 1024 768 32Bit 1280 1024 32Bit 1440 900 32Bit Client CPU More than P4 1 7G DDR DDR 256M Graphic Card 64M Network Card 10 100M Display Resolution 1024 768 32Bit 1280 1024 32Bit 1440 900 32Bit Features H 264 hardware compression Operating Systems Windows XP VISTA WIN7 compr
12. cument list you can see video files the channel all day Double click the file list with the mouse any file name box the document will be in the screen of the current players to play also can click any of the file list file name box if this Screen of the current players did not play any document Then click on Play button then click the file previously will be broadcast ie Network Play This is a broadcast network files on other machines to provide a function Click the network play button it will pop up a network player click the fast connection button or the address button it will connect the other server on the network and the video files on the server will be added to the list on the right of the player Double click the video files will be broadcast 1 3 The local browser to play Procedures for the upper right corner click the Browse button it will pop up a Open File dialog box you can choose any one of the procedures to support the video file click OK the document will be broadcast 1 4 The local multi channel playback at the same time First select a time that it exists some video files in the player s time list box and then select the channel playback at the same time finally click the play button and the video files at the time will be broadcast 1 5 Playback by timeline 4 1 Adjust the timeline ruler and the timescale Open the player you can see the sca
13. dd video is Dynamic video Add delete plan video method First option is Time video or Dynamic Video and then choose the following time scale in a day within one week left click represent adding the type of video right click represent the deletion of the type of video Article time each lattice represent half an hour 2 2 4 Button function description Button Select all Copy the current video mode to the access of seven days Button Clear all Clear the channel of the video mode all the way for seven days Button Copied to the daily Copy the channel video mode on sunday to the other days Button Copied to all Copy the channel video mode every day to the other channels Select the video disk Part 2 2 5 Select the video disk Check from the list of the disk used to store documents 2 2 6 The length of the video file Set the length of the video file packing Default value is 60 minutes 2 2 7 Disk space reservations Settings for each video disk space reservations Default value is 500MB 2 2 8 Opening of the cycle of video Check means that the opening or not open XNote If there no disk can be checked from the list the system store the video recording documents to the default disk C 2 3 Motion detection Setup Click Motion detection Setup tags access to Motion detection Setup Fig 10 Video Card Record Network User Manage System Info Output Alarm H H ech
14. ds In the starting position and end position of the right are two different input box for the left side of the Interception of user input to the start position and end position end position must be greater than the initial position the right is calculated after the procedure the documents come to the interception of the end of the initial location and location In practice the user enters the start position and end position and the procedure to calculate the start position and end position may be about 1 2 seconds error When the interception in the document in order to calculate the location of the procedure shall prevail Click the choose the directory button on the right of Save file name you can open a Save As dialog box for users to choose the path of files In the Save As dialog box modify the file name of the storage operation is invalid because the process will automatically be editing the document in accordance with the time and clip recording to calculate the starting point of the document after editing the file name file name and file to ensure that starting Time line before Save the file name the interception of the following documents is to show the path and file name As a result of the above options click on View button the program automatically calculates the document on the interception of the initial position and end position and calculate the interception of the file name After completion of th
15. e Shield Start the shield Log off Log on or log off the system Process minimize Minimize the main window interface which is equivalent to hide button Exit Exit the system PTZ Set PTZ information Setting Dome preset Setup the ptz preset See 1 4 0 Preset setting E map Open the e map Chat Internet customers with the text Contact chat Log Look at the system log Network Info Show remote access news Version Info Display software version information Xx Note PTZ control capture and other functions for the purposes of each channel For example when the first channel into the operation please click on the first channel and then operate accordingly 1 4 0 Preset point setting method Open the preset settings page Fig5 1 H ue zl ll set H eat H Gei Wait time Sec 85 1 Click the Add button and increase of 2 or more cruise points and set the appropriate time select the first preset in the drop down menu click Setting the ptz turn to an angle then select the second preset and click the setting too then Save after check the auto cruise the ptz will rotate automatically and stay in the setting preset position appropriate time 1 4 1 E map Setup Clic or the right mouse button click electronic map enter the E map setting page click Change background image can customize the E map background support bmp
16. e Section the start time and the end time respectively the end time must be bigger than the start time after user select time section and click Search button the record file in this time section will be added to the right side video list 23 Video data list box Select the date and the camera after show them in this box all eligible Documents double click the playback file in the window of the current players to play this document 24 CE Select the video file type Box in the video showed a list of video files in different ways Is The current time display By the time of hour minutes seconds to show the Current Playlist screen broadcast live images of documents that is the picture of the real time recording 26 Documents show the total time By the time of hour minutes seconds to show the Current Playlist screen is the total playing time of a document Gs Has been playing time display By the time of hour minutes seconds to Show the Current Playlist window is playing the file has been broadcasting time 28 Documents show the current players The file name of playing in the current Playlist window 29 Exit Click this button exit the playback process K 3 20 Select Deselect Click this button to select all channels and click again to cancel all the options Figure A part of the red box is checked all channels NoSignal IESEAN EOT e o as 31 Ma
17. e of the language file under the ServerLanguages contents otherwise the software will demonstrate unusually See the operating system language ID Examine the system language code through the operating system information of the System Message in the System Setup For example simplified Chinese is 0Ox0804 English is 0x0409 Z Client Operating System Login System Double click the IDVR Client icon on the Windows desktop after booting enter the client monitoring system the main interface is as follows Viz 13 14 15 16 Connect to server function button Packet connection control if the system is only one group then automatically all connected Fidcord Open Close the current channel record capture and browse the current channel selected images Open Close the current channel sound ei Sie gin Login System Logout System Minimize hide the main interface window Exit System To enter full screen mode press ESC key to switch Forward page switch monitor screen Back page switch monitor screen Auto page switch monitor screen Open PTZ Control Panel see 1 1 PTZ control buttons introduced Open E map Note The current version of the client e map function is unavailable Enter Review Enter System Setup 1 2 PTZ control button Introduction Focus I Iris
18. e operation click the Save the file will be editing the document the document will not be editing the paper clip to cause any damage it is only from the paper clip to copy a clip of the document saved to the clip D technology parameter Platform WINDOWS XP VISTA WIN7 Operating system Video input Multi channel PAL NTSC composite video input Video output Support the secondary display device Audio input Multi channel audio input Audio output Through the sound card speakers in real time playback real time sound monitor site Alarm input 8 16 normally open normally closed optional alarm input can be expanded to a 32 way Alarm output 8 16 normally open normally closed optional alarm output can be expanded to a 32 way Communication Interface Standard RJ 45 Network Interface Image Resolution 352 288dpi PAL standard 352 240dpi NTSC standard Display Mode Real time display single screen 4 screen 6 screen 8 screen 9 screen 10 screen 12 screen 16 screen 20 screen 25 screen 36 screen full screen display lock security function the screen before and after the switching function Screen information The camera name date time video and alarm status confidential cover regional Time Show Displays the current time location X 0 180 Y 0 270 adjustable stored in the video frame time display adjustable brightness adjustable transparency Lens Name Shows that the camera name location
19. e server Select the server on the left list In server Settings information bar fill in IP Address server name click the update button Click Apply and then Update server completely 3 Delete server Select the server on the left list click the delete button Click Apply and then Delete server completely 1 2 Group Setup As follows Server list Watch System User purview iDVR_1 192 168 1 7 Channel iDVR_1 192 168 1 7 Channel iDVR_1 192 168 1 7 Channel3 iDVR_1 192 168 1 7 Channel 4 El Server domain mame or IF Ee DR 10192 168 1 7 5060 o Ch li A Channeli ceg k Channel ae IVE_1 fy Channel 4 a Olm 2 192 165 1 8 5060 The page can generate packet monitor settings Settings as follow these steps In the packet drop down list select its packet number in the server list of the tree select the server in the sub list of the server monitoring points select the monitoring point Click on the modify packet content button to add the monitor screen click the Clear the group button will clear all of the monitoring group settings The completion of a group set up all the monitor screen click on the application of the entry into force to repeat the steps to set up other sub groups 1 3 System Setup As follows Server list Watch System User purview The page displays the computer system configuration and completes policy settings Automatic resta
20. ed to the computer s serial number Note In general the ptz of serial cloud mirror 1 the alarm use the serial port 2 not set to repeat 2 6 3 Alarm channel Select a channel alarm equipment 2 6 4 Opening the channel alarm Whether the opening of the channel alarm 2 6 5 Normally closed alarm input After check Closed circuit alarm said alarm without alarm that alarm off or vice versa 2 6 6 Alarm trigger sound Receipt of alarm signals trigger the sound 2 6 7 Alarm pop up E map Alarm signal received the pop up E map 2 6 8 Alarm Link video when this channel alarm there will trigger the video card on which the channel record 2 6 9 Alarm Link output when this channel alarm there will trigger the video card on which the channel alarm 2 6 10 Opening of the regular deployment vV on behalf of arrange protection by the system automatically otherwise by the system manually operated 2 7 User manage Setup Click User Setup tags access to the user parameters settings Fig 14 Video Card Record Motion Det Network Alarm WER WE b Appl Fig 14 2 7 1 User List In this list all system users 2 2 User Permissions Choose to add the user permissions X Note You must be careful to choose the user permissions when you add users admin user can change password but cannot delete and modify the permissions 2 8 System settings and information Click System setti
21. eo transmission is interrupted by Close Connection and we will not be able to carry out this operation Disconnect the connection of this channel Close the connection of this channel whether receive the motion detection All channels receive the motion detection or not Fullscreen monitoring or not All channels start stop hand recor contact chat with network clients Show the all server list double click the channel number connect to the server Disconnect all connections of the client to servers Minimize the main window interface which is equivalent to hide function Input the server domain name or ip in the Server Domain name or IP the default port is 5060 and correspond with network port in the server s Network Parameters select the connected channel then enter the correct user name and password in the user password check chck OkK and we can connect to the specified server 1 1 System Setup Channel list Setup As follows EI Server and channel list l iDVR_1 192 165 1 T EH Channell EH Channel EH Channel3 EM Channel 4 o gl iDVR_2 192 168 1 8 5060 The page set up to monitor the server and control point camera 1 Add Server In server Settings information bar respectively fill in IP Address server name optional and choose the service channel click the add button The list on the left add a server Press the Apply button add the server to complete 2 Updat
22. erver list Watch System User purview The Permissions are as follows Record permissions Allow to record Playback permissions Allowed to play record files Capture Allow to capture Messaging Allows the user to send a message to the server Adjust color Allows the user to remote adjust the color PTZ control Allows the user to remote control the ptz Remote control Allows the user to perform some special remote control commands Control server to shutdown Monitoring permissions Allows to monitor the voices of the server Exit process Allows the user to exit the process Set up a list of monitoring points Allows to set up the monitoring points list if the users log on without this Permissions the setting page will not appear Monitor screen group setup Allows to setup the monitor screen if the users login in without this Permissions the setting page will not appear System setup Allows to setup system if the users login in without this Permissions the setting page will not appear User management setup Allow for user settings Permissions the setting page will not appear if the users login in without this Review V3 0 The review main interface is as follows 70 A8 VA Smaa a 20M 09877 17 7 A RK b GH 274 alt ZPS as bal A Al te EAZ EN NoSignal Zoll 0J 29 17 27 2011 03 23 17 37 47 ikes as i FA GIS i kreien Channa 14 Channel 08 Channel 09 Channe
23. ess mode H 264 Display Resolution 1024 x 768 1280 x 1024 1440 x 900 Record Resolution 352 x 288 PAL standard 352 x 240 NTSC standard Or 320 x 240 640 x 480 D1 The system Maximum support 32 channel Support single screen 4 screen 8 screen 9 screen 10 screen 12 screen 16 screen 20 screen 25 screen 36 screen Support to display full screen support for auto flip can be multi stage amplification Real time multi screen display Record Playback function support multiple PTZ control Supports a wide range of alarm box Continuous video timing video dynamic video event video alarm video and so on Each camera can set the display name NTSC PAL video display standard two options 25 s real time preview near real time playback Regulatory function of video attributes to make the image more clearly Video multi level image quality adjustable to change the storage file size to facilitate the application of different occasions Mobile alarm video recording video alarm sensitivity pre video time adjustable delay time video to support the voices of alarm output Intelligent search camera lens can play back all the time year month day time period or long period of time for retrieval automatic alarm video search can distinguish video events With single multi screen playback at the same time With local amplification playback with frame by frame fast playback slow playback the
24. format Through the Add Camera and Add Alarm can add the camera and alarm in the e map add the camera and alarm can base on the actual situation Double Click the camera has been added you can preview the channel System Setup Setup Click Button Video Card Record Motion Det Network User Manage System Info Enter Setup Fig 6 First show the video settings page No Signal Copy to all Please restart the program after modify the below Fig 6 Video card Setup Preview section 2 1 0 Channel drop down menu used to select the channel to modify it Se Channel Name select the channel to modify the current display name up to 40 English characters and 20 Chinese characters 2 1 2 Color Program drop down menu the system can choose the default color of some commonly used configuration can also choose Custom and through the following brightness contrast color sharpness etc to adjust the slider to meet your needs 2 1 3 Opening of the Preview The current channel is selected to show playing Can monitor this channel screen Otherwise this channel can not monitor screen 2 1 4 OSD Setup Show channel name Tv Show the channel name Otherwise don t show the channel name Show time e Display system s date and time Otherwise don t show the system s date and time OSD Translucent V Show the channel name and the date and time for semi transparent
25. he domain name will also display exception 2 4 6 external IP The server s external IP address users can connect to the server through the extern IP In the Web log of the Log Management we can see the information of the external IP address 2 4 7 Local IP The server s local IP address LAN users can connect to the server through the IP address 2 4 8 Auto open port mapping Select the Auto open port mapping the user may be using the domain name or external IP address to connect the server if you need auto port mapping please open UPnP on router X Note When client can not connect the server check the Web service whether to start IE client connect to the server must start the Web service and check the enterable port whether is the same as the server When the users can connect to the server through the local IP address but can t connect to the server through the domain name or external IP address please check the router whether open the UPnP function Auto open port mapping is whether checked when the external IP address can connect to the server and the domain name can t connect to the server please contact the seller to confirm whether the domain name is registered 2 4 9 When the network connection shows Network Connection Information dialog box When a network connection whether show the network connection information dialog box 2 4 10 Alarm upload Alarm signals received whether up
26. he document in the following edition frame of the source document input click the goal output button pop up the dialog box of choice to transfer the code document output contents increased to the document in the following edition frame of the goal output Then choose the output format click starts to transform then will transfer the record to the appointed contents 16 Gel Capture Capture the current video frame play in the screen of the current players save as the D DVRCFG V6 REVIEW BMP directory file name similar to the format of 20090325 122341 BMP were intercepted on behalf of Year Month Day Hour Minute Second which is the default playback mode procedures IER Network playback Open the network player enter the network playback mode IER o Browse Click this button the pop up dialog box as shown below SEI E 2x Seel c a me M 15 46 3SHO0004 Hed Lo 15 46 51 HO0002 H64 L 17 38 22HO00094 H64 Se WD S 46 3SHOOOD4 H4 OO O 00 RSE OO H eai Ai sl Zim You want to playback the file click the Open button in the Current Playlist screen play the document playback 20 The date of selection box Select the video date to play in this box SE Channel selection box In this box select the channel to broadcast it 22 Time Section Search the video recording document in the time section There have two time selections under the Tim
27. ideo capture card Fig 1 In the start screen user can see the steps to initialize the system This feature can be found where the problem lies in the video card there is a problem immediately after the completion of a successful initialization into the user interface Figure 2 CUPUSERAdmin DA Free 125568 Version 41 0 GU build Sep 26 207 0 pe Am Jg Am dm Jm Jet Zeit ma it n ugi ei el eil ge Wal W Gs SR Log GS Fig 2 1 1 Introduction of the main button interface Preview video window style function TV out function keys to choose System log function keys Shield Unshield function keys ES capture and browse the current channel selected images Open Close the current channel sound Logout System Login System Minimize hide the main interface window Exit System To enter full screen mode press ESC key to switch Forward page switch monitor screen Back page switch monitor screen Auto page switch monitor screen Open PTZ Control Panel see 1 1 PTZ control buttons introduced Open E map Enter Review Enter System Setup Tip If you do not know the specific function of a button mouse over the button to wait five seconds the system will automatically prompt the button s function A D 1 2 PTZ control button Introduction oom 1 Preset 3 vv i PTZ UP PTZ DOWN PTZ LEFT PTZ RIGHT PTZ AUTO FOCUS FAR FOCUS NEAR IRIS OPEN
28. l 10 D D ER D Display the playing file in this area The window display mode Fullscreen and Enlarge Play Local File Network File Backup Capture Select date Select the playback date TimeLine Can movement anywhere on the time ruler The record files information displayer track Time Ruler changes with the time scale Time Scale Can be arbitrarily scaled and moved lt The area to select the channels Select all the channels the staring point and the end point to cut files The video documents show window Execution of process the default screen displays is 4 if necessary could adjust for the 4 screen 9 screen 16 screen 25 screen or 36 screens Enlarging a screen the document will enter the single screen mode At any moment there is a screen in the selected state the program interface displays the video information file playback screen will display the information about ee the document When a screen is selected it s surrounded by a red box Click the left mouse button with one of the display screen the screen has been selected as the current playback screen The number of video window Adjust the Ee e c 2 display screen Se FullScreen Click this button the display screen will be displayed full screen it is necessary to withdraw from full screen simply click the top left corner of the keyboard Esc key or one of the display screen on the right mouse b
29. le L _ I atthe top of the time list box The scale default is 24 corresponding to the ruler shows the time period is 24 hours Fig 1 5 1 Double click the scale it can zoom and stretch operation automatically the shortest is 1 corresponding to the ruler shows an hour time period Fig 1 5 2 EGA ea sasn zok DE ay a l Ebena aga ast VS GE Bake Z011 03 23 17 37 2011 03 23 Ji ms NoSignal Fig 1 5 1 1U UU UU 2 DO OO Nooo 16 00 Channel 0 S OG_ DD 1050505151151 241 241 241 241 241 Channel 08 306_010101011 1 1 1 1 1 1 141 2412412412412121 21 24181 1 Channel 09 Channel 10 The scale default is 24 corresponding to the ruler shows the time period is 24 hours Fig 1 5 1 ACR OLAS a ilp galga 20 63 20 197 J000 2011 09 20 172 daa geen Ae P DS 2011 07 29 ee brates 2011 93 23 17 38 37 2011 63 20 17 28 41 P SA RG Sp NoSignal 7011 02 20 17 08 08 i 20 Ha saaman e i 1 DR Ok l d Fig 1 5 2 2 00 00 05 0 17 10 00 RSA Dae 17 20 17 25 00 Channel 07 DAREC_DATA 201 1 03 2341 2_18 CHLO 1 00 00N H64 Channel 08 DAREC_DATA201 1 03 2341 2_18 CHLO8 1 00 01N H64 Channel 09 Channel 10 The scale is 1 corresponding to the ruler shows the time period is 1 hour If you want the ruler to display a period of the time that the track show the video file information in the period of the time you need to adjust the scale s length First move the timeline to the hours that corresponding to
30. load the alarm signal 2 4 11 E mail After checking the system will send alarm information to the specified mailbox Server Sender s mail server address User Login Sender s mail User Password Login Sender s mail Password Sender Address Email to send alarm information Delivery Address Email to receive alarm information CC CC E mail address of alarm information 2 5 PTZ Setup Click PTZ Setup tags access to the PTZ control settings Fig 11 Video Card Record Motion Det Network Channell No Signal Channel Protocol Baudrate Address Por Channel 2400 EN o Com e Channel 2400 m2 g Com e Channel3 2400 E Comi e Channel 2400 g4 Comi mmm K Cancel Apply Fig 11 2 5 1 Channel Used to select the channel to modify it 2 5 2 Protocol type Decoder decoding agreement 2 5 3 Baud rate Channel selected for the current settings of baud rate decoder 2 5 4 Start Address Decoder address stream when setting the parameters the value corresponding to the first channel decoder address stream 2 5 5 Use Port Selected for the current channel set top boxes connected to the serial number 2 5 6 Button Help see 1 1 2 6 Alarm Setup Click Alarm Setup tags access to the alarm parameters settings Fig 12 Motion Det Network are F User Manage Systern Info Fig 12 2 6 1 Alert Protocol Alarm device communication protocol 2 6 2 User Port Alarm equipment connect
31. ngs tags access to the system settings Fig 15 Video Card Gesi Motion Det Check Shortcut on Check Update Now wg eg Apply Fig 15 System part 2 8 1 Shutdown Timing When the system time set to the user settings of the regular time the system will automatically implement timing 2 8 2 Exit the program Return desktop Exit from the system to the desktop Restart the computer Restart the computer when you exit system Shut down the computer Shut down the computer when you exit system 2 8 3 When enter program whether logon automatically vV use the user and password login Automatically Otherwise the system don t login Automatically 2 8 4 Allow to use Task Manager v allow the user to use Task Manager Otherwise the user can t use TaskManager 2 8 5 Allow to use of WIN key need restart system v allow to use WIN key Otherwise WIN keys are not allowed to use 2 8 6 Auto run when start windows v run the software when start windows Otherwise the system don t run when start windows 2 8 7 Disable panel Standalone mode e Doesn t display the panel when start the system display the video fullscreen Otherwise display the panel 2 8 8 Minimize run after start y the minimize to the lower right when start the system 2 8 9 Check Shortcut on Desktop will put a shortcut on the desktop or vice versa S
32. r and less then two hours so the ruler will show two hours length 4 2 Playback by timeline A Continuous play Choose the date then select the playback channel the video display window will be automatically adjusted the window display mode by the channel number and then click the play button then the video files of the selected channel in the date will be broadcast B Seek Play Select the date and the playback channel he video display window will be automatically adjusted the window display mode by the channel number drag the red marking line the window will quickly preview the video file information drag to the requisite point time and release the left mouse button click the play button then the selected channel will be broadcast from the point time if we continue to drag the red marking line the video will be shown by fast forward mode stop dragging the video display will be to normal state Cut Record File Player in the document click the edit button the following pop up dialog box z Unit Zei Second _ Frame Range Frame Umit Frame O73 Time Unit Second oO 146 wear month day_ hour minus sec real Start Pos 2010 10 07 fie Sigi Si End Pos 2010 10 07 16 ss i so tJ Save file as In the scope the region it can be seen in frames and in seconds the length of the document From the above picture can be seen a total of 8100 frame of the document or there is a length of 328 secon
33. rked starting point Marked the starting point to intercept the video file Figure B ES Marked end point Marked the end point to intercept the video file Figure B Select the channel to be intercepted video files and then click the button of mark the start and end points to set the start point and end point Finally click the Backup button the specific operation see Article 16 backup operation the video files be marked will be backup to the storage directory Fig B 8 92 Or ai 12 15 16 17 18 19 z M 2s 7 op og 30 31 Channel 0 i Channel08 08 i DAREC_DATA 2011 03 23 12_18 CHLOa 17 30 Channel 09 The start point Be Channell0_ Click these buttons to set the start point and the end point i k ES ep File playback mode Currently offers four ways to play 1 1 Local Play This is the default mode of playing After entering the procedure we can see that in the upper right corner of the procedure there is a marker of date drop down box a marker of channel of the drop down box the following box and a file list Proceedings will automatically search all local hard disk video data In the Date drop down box can be seen that all the video files are added to the date of the drop down box In the Channel drop down box you can choose which one would like to broadcast channel In the Date and channel are a good choice if the designated channel in the specified date there are video files in the do
34. rt Automatic restart your computer time check effectively Automatic shutdown Automatic shut down your computer time check effectively Video storage disk set Set the record documents and video capture documents and disk drives the box will be automatically listed in the list of computer disk from the beginning of the hard drive C partition Strongly recommended Set the storage site after the E or the letter If they choose to save in the E plates while the video paper documents and drawings are located in E REC DATA and D DVRCFG V6 CLIENT BMP directory this directory has two subdirectories one is the file name Click on the application entry into force after the complete settings page 1 4 User Setup As follows 1 Add User Click the Add User button In the Add User dialog box fill in user name password confirm password Select the appropriate permissions Click Apply Completion of the user to add 2 Delete User In the user list select the user Click to delete user button Click apply Completion of the user to delete 3 Modify the permissions In the user list select the user Select the appropriate permissions Click apply Completion of the user rights to amend 4 Change Password In the user list select the user Click the change password button In the change password Change password dialog box Determined Click apply Modify the user s password to complete Gaz S
35. space 2 1 10 Coding type QVGA The current video encoding settings for QVGA format video resolution of 320 240 CIF The current video encoding settings for CIF format video resolution of 352 288 240 Half Di The current video encoding settings for QVGA format video resolution of 640 480 240 need to support by Video card X Notes QVGA is the default video format 2 1 11 stream type Video stream Village Code does not include the audio stream Audio and video stream Village Code include the audio stream 2 1 12 Video standard PAL Set the current standard for the PAL video standard CIF resolution of 352 288 China region NTSC Set the current standard for the NTSC video standard CIF resolution of 352 240 X Note Depending on the specific settings of the standard camera support 2 1 13 Button Help Reference 2 1 6 Video storage Setup Click Video settings tags access to regular video and dynamic video settings Fig 8 Video Card Record Motion Det Network Alarm User Manage System Info eo ae eee se Pe TELE Copy to everyday mnt tr wilt pee ee et ET ET ELE LET LL Jo 4 SESE ea ee ee Esk E A T See TLV ITI ILILiiLiititli Pe I os So RS ee ee ET EI TIET TIET ong Fig 8 Plan video Part 2 2 1 Channel drop down menu Used to select the appropriate channel 2 2 2 Timing video single box Click plans to add video is timing video 2 2 3 Dynamic video single box Click plans to a
36. tart Menu will put a shortcut on the start meun or vice versa System information part This page shows the configuration of the computer and system uptime Language information Part Auto select system language v will match the system language Otherwise the user may choose other language in the language list and restart the DVR system to cause it to become effective If it does not have the language of the user to need in the language list then we can increase the language file the method to be possible below to refer increase the DVR system language file Increase the DVR system language file For example Increase French Ox040C Open the the ServerLanguages folder in the installs directory we may see the existing language files of the DVR supervisory system copy a optional language file to add to this directory and rename the new file to French ini Then open the French ini and revises the Language value under the field of the General to French revises the LanguageID to 0x040C and change other string under the field to corresponding French Save this file in the end Restart the DVR supervisory system we can found the French language in the language list of the Language information in the DVR system Setup Chooses this language click application then restarts the DVR supervisory system to become effective x Notice Please don t arbitrarily change the strings nam
37. the period of the time and then double click the scale the ruler will be shown as the period time of the red lines in move or extrude the scale the ruler shows the start time and end time that corresponding to the required of the period time For example 1 If you want to display the video file information between 17 00 18 00 First move the timeline between 17 00 18 00 Fig 1 5 1 then double click the time scale and the ruler will show the time period between 17 00 18 00 corresponding the tracks will show the record files information Fig 1 5 2 2 If you want to display the video file information between 17 10 18 00 according to the operation above 1 move the timeline to right and let the start time of the ruler is 17 10 and the tracks will show the record files information between 17 10 18 10 because the period time between 17 10 18 00 don t have an hour so the ruler default show an hour between 17 10 18 10 3 If you want to display the video file information between 17 30 19 00 according to the operation above 1 move the timeline to right and let the start time of the ruler if 17 30 and then move the mouse to the most right of the scale click the mouse left button to stretch the scale make the scale length into 2 and the ruler will show the time period between 17 30 19 30 corresponding the tracks will show the record files information between in this period time too because the period time 17 30 19 00 over one hou
38. utton double click Fa Progress bar The progress bar show the players document of the progress The mouse can be dragged to adjust the location of file The progress of the right figure 1 2 4 8 16 tor1 2 1 4 1 8 1 16 that reflect the current playback speed 4 Play Normal speed to play the file a Pause So that a file here suspended by clicking Play button to continue to play the file 6 E Stop The end of play and close the file la aT To file the first So that the current document location of positioning at the first beginning and documents in a suspended state Clicke the Play button to continue to play S en ml To file the end So that the current document location of positioning at the end document And documents in a suspended state At this point such as click on the play button the document will be re broadcast Need to pay attention because this function depends on the index of open files the time and file size of the documents establish is proportional so when the file is too large the need to open the file after a certain period of time in order to use this function Please note In the local playback time click on this button will open a document and from the beginning of a file to play 9 zm Slow Slow down the playback speed of the document Continue to click on the button playback speed document Sustainable down Playback speed in normal circumstances click the button total of 4 times
Download Pdf Manuals
Related Search