User guide BTUpdater 1.1 ENG
Contents
1. Highest RDS enabled OyYes No Japan 76 108Mhz Yes No Personal profile R Apply O Connesso Vox sensitivity it is possible to define the sensitivity VOX feature There are 4 steps available clicking on the round dot on the right of the value you can simply choose which one is active It is also possible to change the value of each level For example if the Highest sensitivity is not enough you can adjust the numeric value simply clicking on the small arrow and choosing a different one Remember that the lower value define the higher sensitivity To turn off the VOX feature simply click on the round dot corresponding to Off For example if you use the boom mike with an open face helmet we suggest to use the value 650 If you use a full helmet with the wired mike we suggest the value 850 Device Volume you can increase or reduce the general volume of the unit in case the Volume t button max regulation is not enough For example if the max volume level of the intercom adjusted from the Volume button is not enough you can increase the volume simply changing the Device Volume number The range is from 6 to 10 and 10 is the highest possible ATTENTION Do not use the volume level 9 and 10 if the speakers are placed in direct contact of your hears The highest volume can cause injury to your hears Microphone Sensitivity you can increase or reduce the general sensitivity of the mike When2. the sensitivity of the microphone is increased choose High or Very High your voice will be higher to the remote person Reducing the sensitivity of the mike choose Low or Very low can help avoid the wind noise or the background noise You can choose 5 different levels Very High High Medium Low and Very Low FM Radio to enable disable the FM Radio FM Radio Stations you can set the frequency and save six of your favourite FM radio station RDS enabled to enable disable the FM Radio RDS function Japan 76 90 MHz to enable disable the FM Radio Japanese frequency range Wired connection when active Yes the audio from the wired connection AUX is always active in background also when the intercom is open Personal Profile you can save current set up as a Custom configuration For example you can change the set up value of the BTNext unit and save it with just one click on the floppy disk icon C9 E You can reload activate the saved configuration when needed with a click on the Apply button The date information is the reference of when you saved the profile Read to read the current configuration of the unit Save to save all the changes and settings Every time you make a change to the configuration you must remember to save it with a click on this button Restore defaults to restore to the factory setting Reset pairing you can reset delete all the pairing information phone GPS unit with j
3. Microphone Sensitivity you can increase or reduce the general sensitivity of the mike When the sensitivity of the microphone is increased choose High or Very High your voice will be higher to the remote person Reducing the sensitivity of the mike choose Low or Very low can help avoid the wind noise or the background noise You can choose 5 different levels Very High High Medium Low and Very Low Wired connection when active Yes the audio from the wired connection AUX is always active in background also when the intercom is open Personal Profile you can save current set up as a Custom configuration For example you can change the set up value of the BT Next unit and save it with just one click on the floppy disk icon a E You can reload activate the saved configuration when needed with a click on the Apply button The date information is the reference of when you saved the profile Read to read the current configuration of the unit Save to save all the changes and settings Every time you make a change to the configuration you must remember to save it with a click on this button Restore defaults to restore to the factory setting Reset pairing you can reset delete all the pairing information phone GPS unit with just one click Upgrade to upgrade the firmware of the BT unit when available After you download the new firmware from the Midland web site the firmware files have the ZIP
4. BT Updater V1 1 main window BT Updater THE gt D GENERATION Benvenuto nell applicativo Midland BT Updater per favore collegare il dispositivo alla porta USB Attenzione Collegate solo un dispositivo BT per volta Welcome in the Midland BT Updater software please connect the BT device to the USB port Attention Please connect only one BT unit at a time Bienvenido al software BT Updater Por favor conecte el dispositivo BT al puerto USB Atenci n conecte un solo dispositivo BT a la vez Herzlich Willkommen zu Midland s BT Update Software Bitte verbinden Sie das BT Ger t mit der USB Buchse Achtung Bitte verbinden Sie nur ein BT Ger t zur Zeit Bienvenu dans le software BT Updater Connectez s v p l unit a la porte USB Attention Connecter seulement un module BT la fois Z AipLanD Main window if no device is connected to the PC You will have this window all the time you open the program without BT unit connected to the USB port As soon as you connect the BT unit to the USB cable the screen will change based on the BT model connected BT Updater V1 1 BTNext window BT Updater ae i Rider Intefcom Syst i Device name Midland BT NEXT Firmware version 31 10 2012 FM radio enabled Yes No FM Radio Stations 1 102 50 4 102 50 Sensitivity o 102 50 102 50 2 5 Low O Normal Q High j Wired connection 3 102 50 2 6 102 50 Always active 4 gt 4 gt 4 4 gt
5. extension just click on the Upgrade firmware button and choose the file previously downloaded no need to unzip the file
6. ust one click Upgrade to upgrade the firmware of the BTNext unit when available After you download the new firmware from the Midland web site the firmware files have the ZIP extension just click on the Upgrade firmware button and choose the file previously downloaded no need to unzip the file BT Updater V1 1 BIX1 X2 window BT Updater Basic Intercom System Bluetooth Device name Midland BTX1 Firmware version 24 05 2012 Vox sensitiveness Background mode Off Yes O No Low 3 Sensivity microphone Normal Sensivity High Wired connection Always active Personal profile Oys Ono saved the E Upgrade Firmware 4 gt lt gt lt gt gt O O High O O Highest Connected Read done successfully F Exit a Restore defaults gt Reset pairing Vox sensitivity it is possible to define the sensitivity VOX feature There are 4 steps available clicking on the round dot on the right of the value you can simply choose which one is active It is also possible to change the value of each level For example if the Highest sensitivity is not enough you can adjust the numeric value simply clicking on the small arrow and choosing a different one Remember that the lower value define the higher sensitivity To turn off the VOX feature simply click on the round dot corresponding to Off For example if you use the boom mike with an open face helmet we suggest to use the
7. value 650 If you use a full helmet with the wired mike we suggest the value 850 Microphone Sensitivity you can increase or reduce the general sensitivity of the mike When the sensitivity of the microphone is increased choose High or Very High your voice will be higher to the remote person Reducing the sensitivity of the mike choose Low or Very low can help avoid the wind noise or the background noise You can choose 5 different levels Very High High Medium Low and Very Low Wired connection when active Yes the audio from the wired connection AUX is always active in background also when the intercom is open Personal Profile you can save current set up as a Custom configuration For example you can change the set up value of the BTNext unit and save it with just one click on the floppy disk icon lei You can reload activate the saved configuration when needed with a click on the Apply button The date information is the reference of when you saved the profile Read to read the current configuration of the unit Save to save all the changes and settings Every time you make a change to the configuration you must remember to save it with a click on this button Restore defaults to restore to the factory setting Reset pairing you can reset delete all the pairing information phone GPS unit with just one click Upgrade to upgrade the firmware of the BT unit when available After you do
8. wnload the new firmware from the Midland web site the firmware files have the ZIP extension just click on the Upgrade firmware button and choose the file previously downloaded no need to unzip the file BT Updater V1 1 BTCity Eva Ski window BT Updater a Device name Midland BTCity Aog mE Firmware version 25 11 2011 Language Vox sensitiveness Background mode Off O z O Yes O No 900 Low Sensivity microphone Normal 800 O High O 600 O 500 Sensivity Very high Wired connection Always active Personal profile Q Ors One gt SP CP 4p Highest O Connected Read done successfully saved the F Upgrade Firmware a i Exit w Read G a Restore defaults gt Reset pairing Vox sensitivity it is possible to define the sensitivity VOX feature There are 4 steps available clicking on the round dot on the right of the value you can simply choose which one is active It is also possible to change the value of each level For example if the Highest sensitivity is not enough you can adjust the numeric value simply clicking on the small arrow and choosing a different one Remember that the lower value define the higher sensitivity To turn off the VOX feature simply click on the round dot corresponding to Off For example if you use the boom mike with an open face helmet we suggest to use the value 650 If you use a full helmet with the wired mike we suggest the value 850
Download Pdf Manuals
Related Search