Operating instructions for Trop Multitimer - Trop
Contents
1. Checking the timers Pushing the keys Prog or Prog enters the timer mode Pushing Prog or Prog moves to the next or previous setpoint One of the three red LEDs Ch1 Ch2 Ch3 will be on indicating the selected timer Flashing of the LED On or the LED Off indicates the setpoint type The display shows the setpoint pair Program at the leftmost digit followed by the day 1 monday to 7 sunday 0 everyday and the switching time Inactive setpoints will displayed as xc cc cc with the first digit x showing the current setpoint pair If there are no keystrokes for approx 10 seconds the device will fall back displaying the current time Trop Electronic GmbH Germany Tel 49 02351 4326800 Internet www troptronic de Kronprinzenstr 3a 58511 L denscheid Fax 49 02351 4326801 Email troptronic t online de Operating instructions for Trop Multitimer Article No 7 I 7 Programming a timer Pressing the key Set while in timer mode starts programming of the current setpoint Modify the blinking digit by pushing the button Date repeatedly Proceed to the next digit with pressing the SET key again Set the day digit to 1 7 for monday to sunday or to 0 everyday Terminate the setting of this setpoint with pushing Set once more The display returns to the showing the current time While in programming mode a digit is blinking the setpoint may be cleared by pressing the key Test Clear By doing so the setpoint i2. Operating instructions for Trop Multitimer Article No 7 l 1 Power on After power on the device will start up showing the current time If the internal buffer battery has been drained it will start with all segment on for a short time followed by displaying 12 00 This state may also be reached by pushing the reset button at the bottom of the device 2 Buffering The internal buffer battery supplies the clock and holds all data settings for approximately 40 hours if the power net fails Full loading of the buffer battery will take at least 3 days 3 Reset The reset button is located at the bottom side of the device A label with an arrow points to a small hole of approx 1 mm diameter Insert the end of paper clip into this small boring and press gently until you will hear a slight click or until the display will show 12 00 4 Setting the clock After pressing the SET key the first digit starts blinking Now push the button Date ff repeatedly until the desired digit will show up Proceed with the next digit by pressing the SET key again Last will be the day digit 1 monday to 7 sunday Setting is terminated after the day digit by pushing the SET key again 5 The timers The device has 3 programmable timers Each timer has 7 setpoint pairs consisting of an on and an offtime During timer programming and checking there are 5 red LEDs indicating which channel and which function on off is currently selected 6
3. s modified to xc cc cc and the device resumes to normal display of the current time All unused setpoints should be deleted in this way to avoid undesired switching of an outlet 8 Testing By pushing the key Test Clear the outlets may be switched on off The first keystroke sets the outlet Ch3 and the yellow LED Out3 for channel 3 Pressing Test Clear again clears channel 3 and activates channel 2 next time channel 1 goes on A further keystroke will switch off all channels Please observe that outlets which are set by the timer programming may be cleared by the testing and will be only activated again when the time will pass the timer setpoints anew 9 Outlets max 400 watts per outlet not for HQI lamps with more than 400 watts Status indicators yellow LEDs Fuse max 4 0 amps fast 10 Notes HQI lamps with more than 400 watts are not permitted to be operated directly by the timer outlets But timer outlets may drive a power relay which in turn could drive the HQI lamps Increasing the current values of the fuses of the device above the values stated voids the guarantee for the device Timer outlets will become active only after passing a programmed switching time Subject to technical change without prior notice Trop Electronic GmbH Germany Tel 49 02351 4326800 Internet www troptronic de Kronprinzenstr 3a 58511 L denscheid Fax 49 02351 4326801 Email troptronic t online de
Download Pdf Manuals
Related Search