DUNAFORM Operating instructions
Contents
1. DUNAFORM Pressure molder Operating instructions U tl A thermoforming device for all applications of the dental thermoforming technique in the laboratory and in the practice DUNAFORM a thermoforming device of the new generation Set up information The DUNAFORM has to be set up in a dry environment on to a flat area When working with the unit the general rules for prevention of accidents has to be observed When you don t work with the device the mains switch has to be switched off Specification mains switch ON OFF compressed air connection infrared heater pressure dome clamping ring for foils foil support model base plate granulate dish foil keyboard display 10 bolt 11 pressure controller oONDVIP ODPD Forms of delivery DUNAFORM item no 581 003 008 model base plate item no 331 000 507 lead granulate item no 581 004 015 Technical data soa connecian H S0 Hz Attention Safety information p Don t touch the radiator Hot surface fuse T5A Only actuate the bolt when pressure dome is working pressure 0 5 6 bar closed height 190 mm Onl width 350 mm n y operate under supervision depth 300 mm Don t store inflammable substances near p the device weight approx 9 kg Setting to work Put the cold device plug of the separately enclosed cable connection on the back of the device into the socket Put the grounded plug in a 230 V 50 Hz grounded socke2. when working goes on you can repeat from the beginning Otherwise switch off the device at the mains switch 1 Information on cleaning and maintenance Clean the DUNAFORM device simply with a damp cloth Don t use detergents and solvents In order to keep it s full function we recommend to replace the seals annually when using the device strongly If there will modifications or repairs of the electrical or mechanical components of the device be made you need an attestation about the kind and the scope from the company that made the repairs including the specifications of the modification Also the date of the repair the exact address of the company as well as the signature has to be written on the attestation al dente Dentalprodukte GmbH Dieselstr 20 D 88074 Meckenbeuren Fon 0 7542 4090 0 Fax 0 7542 4090 20 Email info aldente de Internet www rsb duna dental de
3. t Connect the compressed air connection to the nipple 2 on the rear ofthe device Now the device is ready to be put into operation and can be started by the power switch ON OFF The switch is equipped with a pilot lamp Operating instruction 1 pressure dome 4 unlock 10 and lift up 2 take away the clamping ring for foils 5 insert the sheet centrically into the support insert theclamping ring for foils and turn it clockwise until the stop so far until the foil spans 3 put the model on to the model base plate 7 or lift up the model base plate which lies loose on the granulate dish 8 fill in granulate and embed the model 4 when delivering the device 4 bar working pressure are adjusted If you want to change the pressure adjustment turn the grip 11 to the right or to the left 5 switch on the mains switch 1 to ON 6 programme and press the enter push button for selecting the heating time by foil keyboard 9 7 the order of events will be shown on the display 9 Swivel the pressure dome 4 under the infrared heater 3 8 after the course of the heating time has run out swivel the pressure dome 4 on the model and lock 9 after the course of cooling down has run out unlock the pressure dome 4 therefore press the pressure dome from above 11 then turn the clamping ring for foils 5 anticlockwise until the stop and only after that lift off the pressure dome 10
Download Pdf Manuals
Related Search