Operating Instructions for ClassicLine / PremiumLine
Contents
1. SAFETY eye showers are designed for an operating pressure of a maximum of 10 bar PN10 3 1 Eye showers with one high performance spray head To guarantee correct operation the flow pressure must be at least 1 5 bar The flow rate is 6 to 8 litres per mi nute This flow rate specified by the standard is set automatically by a flow regulator integrated in the eye sho wer irrespective of the existing operating pressure 3 2 Eye showers with two high performance spray heads To guarantee correct operation the flow pressure must be at least 2 bar The flow rate is 13 to 15 litres per mi nute This flow rate specified by the standard is set automatically by a flow regulator integrated in the eye sho wer irrespective of the existing operating pressure 4 Installation 4 1 Items supplied Eye shower consisting of hand held piece valve body and spray head spray heads Stainless steel coated hose with tapered end and connection nut only hand held eye showers Table bracket wall bracket 45 wall bracket or wall flange Eye shower emergency sign 4 2 Installation To avoid damage to furniture and the floor the shower should be installed near a drain so that water from the sho wer can be channelled away 4 2 1 Table mounted models product codes BR xxx 020 BR 200 xxx Install using the table mounting accessories M28x80mm A hole of 30 mm diameter should be made in the table top at a suitable point 4 2 2 Wall mounted2. eye showers product codes BR 250 xxx BR 300 xxx BR 845 005 BR 850 005 BR 250 xxx BR 300 xxx Install using the wall flange The wall flange should be in stalled with a suitable fastening system on a flat surface wall BR 845 005 BR 850 005 Remove the bottom of the eye shower Drill the embossed holes and arrange the eye shower and mark the mounting holes B 5 FETY Breuell Ingenieurb ro GmbH A Grutzmuhlenweg 46 DE 22339 Hamburg Tel 49 0 40 53 80 92 10 Fax 86 BREUELL ingenieurbiro Arbeitssicherheit info b safety com www b safety com 4 2 3 Wall table mounted hand held eye showers product codes BR xxx 025 Install using the combined wall and table bracket When using the combined bracket as a wall bracket the brass pipe must be unscrewed by hand ensure that work gloves are worn for this The wall bracket should be mounted on an even surface wall using a Suitable fixing system When using as a table bracket refer to the points under 4 2 1 4 2 4 Wall mounted hand held eye showers 45 wall bracket product codes BR xxx 035 Install using the 45 wall bracket The wall bracket should be mounted on an even sur face wall using a suitable fixing system 4 2 5 25 table mounted hand held eye showers product codes BR xxx 055 Install using the 25 table mounting accessories M28x80mm A hole of 30 mm diame ter should be made in the table top at a suitable point 4 3 Position of strainer and gas
3. B lt S FETY Breuell Ingenieurb ro GmbH A Grutzmuhlenweg 46 DE 22339 Hamburg Tel 49 0 40 53 80 92 10 Fax 86 BREUELL ingenieurbiro Arbeitssicherheit info b safety com www b safety com Operating Instructions for ClassicLine PremiumLine Eye Showers CAUTION For new installations the water supply system must be rinsed out before connecting the shower in order to prevent dirt damaging the valve Complaints arising from pipeline which has not been rinsed out can not be accepted see point 9 1 Product overview Art Nr BR 714 xxx Art Nr BR 200 085 BR 210 085 Art Nr BR 250 085 Art Nr BR 300 085 a p F pni Art Nr BR 845 005 Art Nr BR 850 005 Art Nr BR 305 xxx Art Nr BR 852 xxx B 5 FETY Breuell Ingenieurb ro GmbH A Grutzmuhlenweg 46 DE 22339 Hamburg Tel 49 0 40 53 80 92 10 Fax 86 BREUELL ingenieurb ro Arbeitssicherheit info b safety com www b safety com 2 Standards and regulations The B SAFETY eye showers correspond in all respects to DIN EN 15154 2 2006 the ANSI Z358 1 2004 the Technical Rules for Hazardous Substances TRGS 526 and the regulation of the BG Chemie professional as sociation for chemistry BGI GUV I 850 0 These operating instructions are intended as a supplement to the sta tutory regulations and provisions Please comply with DIN EN 15154 2 2006 the ANSI Z358 1 2004 the TRGS 526 and the BG Chemie regulation BGR 120BGI GUV I 850 0 3 Operating pressure The B
4. ed to prevent impact injuries Optimum rinsing is achieved at a distance of approx 15 cm At this distance the diameter of the spray cone is approx 10 cm To use the shower it is advi sable to hold the eye open with both hands 8 4 Self draining of spray heads The spray head spray heads must be emptied each time after use by holding the shower with the head pointing downwards This avoids standing water remaining in the spray head and minimises the likelihood of microbial con tamination 9 Maintenance B SAFETY eye showers must undergo a function test at least once a month This is set down in regulation BGI GUV I 850 0 of the BG Chemie To do this activate the shower for approx 5 seconds This ensures not only that correct function is tested but that any standing water in the shower is replaced by fresh water protection against microbial contamination As part of this function test the shower should be checked visually for signs of wear and tear and any possible leaks and dirt such as e g dust or scale deposits Inspect the hose for any twisted bent or otherwise damaged places Faulty parts must be replaced immediately 10 Procedure for leaking hand held eye showers After connecting to the cold water system the hand held eye shower may have started to leak This is generally due to dirt from the water supply which collects in front of the valve If this has happened disconnect the hand held eye shower from the supply Operate t
5. he shower a few times without pressure and rinse the pipe thoroughly before reconnecting If the fault cannot be remedied by this means the enclosed mesh filter must be fitted in front of the stainless steel hose
6. ket Hand held eye showers The strainer must be mounted between the eye shower and the hose the gasket must be mounted between the water inlet and the hose 5 Water supply The B SAFETY eye shower should be connected to drinking water The drinking water system should be con structed in accordance with DIN 1988 and DIN EN 1717 CAUTION For new installations the water supply system must be rinsed out before connecting the sho wer in order to prevent dirt damaging the valve 5 1 Water supply for hand held eye showers The B SAFETY hand held eye shower is connected to the water supply using the inch connection nut on the hose The B SAFETY hand held eye showers are fitted with a backflow preventer according to DIN 1988 pro tection class 2 3 for short periods In addition a second backflow preventer can be obtained from specialised traders to achieve a higher protection class 5 2 Water supply for eye showers The B SAFETY eye showers are connected with the wall flange the table mounting accessories or the water sup ply which is provided for it B Ss FETY Breuell Ingenieurburo GmbH A Grutzmuhlenweg 46 DE 22339 Hamburg Tel 49 0 40 53 80 92 10 Fax 86 BREUELL ingenieurbiro Arbeitssicherheit info b safety com www b safety com 6 Safety labelling The enclosed safety label self adhesive information sign product code BR205010 should be affixed beside the B SAFETY eye shower 7 Location The location must be se
7. lected in accordance with regulation BGI GUV 850 0 of the BG Chemie Access must be kept free at all times Special attention should be given to selecting a place which can be reached quickly from hazard areas The injured person must be able to reach the shower within a maximum of 10 seconds This necessitates installation at a distance of no more than 10 metres from the work place 8 Operating 8 1 Operating of hand held eye showers Commissioning the B SAFETY hand held eye shower is carried out by pressing the button on the handle This locks the button in the open position To switch off the shower press the button again while pulling down the lok king device When suitably mounted the B SSAFETY hand held eye shower can be operated both in and out of the bracket table feed through wall bracket Operating the shower in the holder makes it possible to hold open the lids of the contaminated eyes with both hands at the same time The shower can also be removed from the bracket This allows other body parts or an injured person on the floor to be treated 8 2 Operating of eye showers Commissioning the B SAFETY eye shower is carried out by pressing the big PUSH lever This locks the PUSH lever in the open position To switch off the shower pull back the PUSH lever 8 3 Eyewash in First Aid Case The eye shower should not come into direct contact with the contaminated eye or its surroundings The black rub ber cup on the shower is only intend
Download Pdf Manuals
Related Search