Operating instructions. Video.
Contents
1. BA_VCR_31251_020EU_GB2 a ViewVision 8106 H Video LOEWE 1 17 04 2003 15 29 Uhr Contents Remote control VCR functions Operation from video unit Connections to rear panel Welcome About this equipment Advantages of connection to a Loewe TV set First installation For your safety Setting up Cleaning Batteries remote control Connections Antenna Euro AV connection Scart Mains supply Switching on the video recorder for the first time Picture and sound from the video recorder on a TV set with a Euro AV connection Picture and sound from the video recorder on a TV set without a Euro AV connection Settings for first installation Daily operation Switch on switch off video recorder VHS Cassette Record protection General menu operation Play cassette Tracking Sound selection mn P A W NNNN NOD OO vn Co Co Co wow o O 9 10 10 10 Pause still frame frame by frame advance 11 Slow motion Reverse play Picture search Status display Stop play eject cassette Fast forward rewind Memory Stop at 000 BA_VCR_31251_020EU_GB2 2 11 11 11 11 11 11 11 Recording a TV broadcast Insert cassette without record protection Select station 12 12 12 with the arrow keys of the remote control 12 Via the station list on video recorder Select recording speed Start recording using the remote control on video recorder Limit recording time Inte2. menu item and call up with OK The Special Information list is displayed Special info gt Highlight the required information The respective information is displayed under the menu items Record Protection PE e Close menu Time and date In order to programme timer recordings including for ShowView you require an accurate time and the correct date You only need to enter time and date manually if the station you are receiving transfers no data or incorrect data or the menu item Autom setting in the Time and Date menu is set to No Proceed as follows Call up the VCR menu Highlight the time and date item and call up with OK The Time and Date menu will be displayed Select No in the Autom setting item The menu items for time and date appear Select these menu items one after the other and enter the current time and the date using the numerical keys on the remote control Close menu 17 04 2003 15 29 Uhr Settings for the video recorder TV stations with Digital Link Plus If you have connected your video recorder to a TV set with Digital Link Plus or a comparable system from another manufacturer eg EasyLink Mega Logic Project 50 the station list will be transferred from the television set to the video recorder This occurs when you register the video recorder with the TV set or when you make any changes to the stations on the T
3. Highlight Settings Call up Settings Highlight Status display Status Display Switch on off Status display BA_VCR_31251_020EU_GB2 21 Picture format via Euro AV The video recorder recognises the picture format used for recording automatically if the menu item Picture format is set to Autom During play you can set the format manually to 16 9 or 4 3 Q Call up VCR menu Highlight Settings Call up Settings Highlight Picture format Picture Format Autom Select Picture format D OG Picture sharpness During play screen resolution can be set as required You can select normal soft or sharp D Gee 17 04 2003 15 30 Uhr Call up VCR menu Highlight Settings Call up Settings Highlight Sharpness Normal Sharpness Set picture sharpness 21 Settings for the video recorder Child lock In the Settings menu you can activate the child lock With the child lock activated and the video recorder set to standby the video recorder cannot be used However the remote control can still be used for operation You must therefore store the remote control out of the reach of children To activate deactivate the child lock Call up VCR menu Highlight Settings Call up Settings Highlight Child lock via other Child Lock Switch child lock on off A video that is running can be watc
4. Stations Call up Stations Highlight Sort delete Call up Sort delete G Sort Delete Channel Fi C08 ax Sort M Back 4 Delete E End Highlight the station to be moved to another position or to be deleted Press OK to sort Move station Close move To delete a highlighted station Press the lt key BA_VCR_31251_020EU_GB2 19 Manually set TV stations Set stations manually if a new TV station can be received a missing station name is to be entered or a Station is to be fine tuned If the video recorder is connected to a TV set with Digital Link Plus or a comparable system you can only fine tune the station The other menu items cannot be implemented These settings can only be carried out on the TV set Call up VCR menu Highlight Stations Call up Stations n Highlight Manually adjustment Call up Manually adjustment Manual adjustment Station Number Channel d gt i S JAD M Store OMOR Input E Cancel Highlight Station number and enter a free memory location Highlight Channel range For channels E02 12 and E21 E69 select VHF UHF For cable channels S01 S41 select cable If you know the channel number of the station highlight Channel and enter the channel number two digits e g 02 for channel 2 with the numerical keys of the
5. Austria Robert Bosch AG Postfach 146 A 1011 Wien Tel 01 79 72 24 500 Fax 01 79 72 24 599 Benelux Loewe Opta Benelux NV SA Uilenbaan 84 B 2160 Antwerpen Tel 0902 88 00 2 Fax 03 235 48 37 Loewe Opta Nederland B V Ravenswade 54A1 NL 3439 LD Nieuwegein Utrecht Tel 0900 20 20 180 Fax 030 280 33 27 cls Service Center Loewe ul Verkhnyaya Maslovka d 29 RUS 125083 Moscow Tel 095 212 50 43 956 67 64 Fax 095 212 47 10 Cyprus L amp M Eurappliances Ltd P O Box 23426 Kennedy Avenue 1A amp B CY Nicosia Tel 02 42 05 10 Fax 02 42 87 70 Czech Republic TIPA sdruzeni Dolni nam 9 CZ 746 01 Opava 1 Tel 0653 62 49 44 Fax 0653 62 31 47 Denmark Kjaerulff 1 Development A S Vestre Stationsvej 9 DK 5000 Odense C Danmark Tel 661 354 80 Fax 661 354 10 France Sorep Import S A 11 rue de la Durance F 67029 Strasbourg C dex 1 Tel 03 88 79 72 50 Fax 03 88 79 72 59 BA_VCR_31251_020EU_GB2 28 Germany Loewe Opta GmbH Kundendienst Zentrale IndurstriestraBe 11 D 96317 Kronach Tel 09261 990 Fax 09261 95411 Great Britain Linn Products Limited PO Box 8465 Prestwick UK KA 7 2YF Tel 01292 47 15 52 Fax 01292 47 15 54 Greece SOUND HELLAS S A Kleanthous Str 10 GR 54642 Thessaloniki Tel 2310 856 100 Fax 2310 856 300 Hungary Basys Magyarorszagi KFT Epitok utja 2 4 H 2040 Buda rs Tel 023 415 637 121 Fax 023 415 182 Israel RIF TRADING LTD 29 Izhak Sade S
6. Please note that the recording of pre recorded tapes DVDs CDs etc could represent an infringement of copyright Cleaning Use only a soft clean damp cloth to clean the video and the remote control don t use any caustic or abrasive cleaning agents 17 04 2003 15 29 Uhr First installation Batteries remote control To insert or change the batteries press on the arrow Slide the battery compartment cover downwards and remove it Insert Alkali Mangan LR 03 AAA batteries and ensure that the and ends are connected correctly Slide the cover upwards to shut Information for the disposal of batteries The batteries provided in the unit do not contain cadmium lead or mercury According to the Used Battery Decree batteries may no longer be disposed of in household rubbish You can dispose of used batteries at the commercially provided collection points Your dealer will also have a collection point for used batteries BA_VCR_31251_020EU_GB2 7 Connection Antenna Remove the antenna plug from your TV set and insert it into the upper antenna socket ANTENNA of the video recorder Using the cable supplied connect the lower antenna socket of the video recorder to the antenna input of your TV set This connection is necessary to supply both the video recorder and the television set with the antenna signal In addition the video recorder has a transmitter that transfers picture and sound and th
7. To prevent damage to the video heads and the tape the unit switches back to play after five minutes Pause still frame PAUSE Display on video recorder O Frame by frame advance press repeatedly Q Continue play Slow motion You can start slow motion play directly with the amp arrow key or switch to it during normal play The picture is subject to interference from the system and has no sound Slow motion SLOL Display on video recorder Q Continue play Minimise interference Reverse play You can start reverse play directly using the lt arrow key or switch to it during normal playback The picture is subject to interference from the system and has no sound Reverse play PLAY Display on video recorder Q Continue normal play BA_VCR_31251_020EU_GB2 11 Picture search During play you can switch to picture search forward or back The picture is subject to interference from the system and has no sound This way it is easy to search for the start of recordings CA Picture search forwards PLAY bp Display on video recorder Q Picture search backwards Pray dd Display on video recorder Q Continue play Status display On play record fast forward and rewind and on stop when the function is switched on the status display appears briefly You can also open and close the status display with the E key Open close status display You can switch off automatic opening of the status display see
8. during thunderstorms and during long periods of absence Do not open the video recorder under any circumstances as you could be exposed to voltages that are life threatening There are no user serviceable or exchangeable parts in the set Repair and servicing should only be carried out by authorized TV technicians BA_VCR_31251_020EU_GB2 6 Setting up Install the video recorder horizontally and leave enough room for ventilation Please note that when the recorder is pushed across furniture made gt from softwood e g spruce fir pine the feet of the equipment could leave marks The plastic material of the feet contains softeners which can occasionally affect the surface of furniture In this event use a pressure resistant pad about the size of the video recorder If the equipment is moved from a cold environment to a warm room moisture may condense on all parts of the equipment condensation Moisture on the head drum and the tape guides can damage the tape and the head drum Let the video recorder stand for about an hour and only switch it on when it has reached room temperature The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time Lay the cable in such a way that it will not be damaged The mains cable must not be bent or laid over sharp edges trodden on or exposed to chemicals A mains cable with damaged insulation can lead to electric shocks and is a fire risk
9. video recorder by selecting daily here Normally the VPS time is the start time of the broadcast If VPS is to be effective this time must be entered exactly If you only want to record part of the broadcast deactivate VPS on the Timer settings and enter the appropriate time If for example a substitute broadcast was recorded in the station then the VPS time is not the start time 17 04 2003 15 29 Uhr Daily operation ShowView Timer 3 Call up ShowView menu using the numerical keys on the remote control enter the number shown in the TV magazine Do not enter the hyphens they are only used to make them easier to read 12345677 Press the OK key the Timer data menu is displayed D Select the station required or enter the station number with the numerical keys Check the day and the times Recording type Select Once MO FR Daily Weekly Use VPS select yes or no LP SP select recording speed Save AAR BA_VCR_31251_020EU_GB2 15 If you programme several recordings ensure that you do not select several broadcasts that are on at the same time and ensure they do not overlap and that the programmed recordings are not too long for the cassette in the compartment Refer to the VCR menu under Timer list and check the inserted cassette If the inserted ShowView entry does not lead to the result expected check the date year and time in the VCR menu under Date an
10. Loewe TV set the Timer data is stored in the TV set message Timer data stored how to find the timer data for satellite recordings in your TV set in video mode call up the video menu select Timer change and delete and call up with OK There is no entry in the Timer list of the video recorder Insert a cassette without record protection Select the record speed SP or LP as described above because this setting cannot be done via Digital Link Plus 17 04 2003 15 29 Uhr Settings for the video recorder Language You may remember that you selected your menu language when first installing the video recorder If the language has been inadvertently changed by you or by another user you must re select the language To make it easier for you to find the menu entry for language in a foreign language we have made it the last line of the VCR menu Proceed as follows Q Call up VCR menu Highlight last menu item and call up with OK The list of menu languages is displayed D Select your menu language Confirm with OK Close menu Q D o BA_VCR_31251_020EU_GB2 17 Special information Under Special Information in the VCR menu you will find details of the state of the video heads whether record protection is active or not the number of Timers and the next Timer for recording with the video recorder To call up Special Information Q Call up VCR menu Highlight the Special info
11. To cancel use the E key 20 BA_VCR_31251_020EU_GB2 20 Settings Behind the menu item settings in the VCR menu you will find a number of settings for the video recorder Colour standard By default the colour standard used is the one that was recorded The video recorder recognises the standard automatically If the video recorder does not recognise the colour standard you must set it manually You can switch between Autom PAL and MESECAM as follows Q Call up VCR menu Highlight Settings Call up Settings Highlight Colour Standard Colour Standard Autom Select colour standard Autom PAL or MESECAM 17 04 2003 15 30 Uhr Switch on off memory stop at 000 Using the 000 key you can set the counter to zero at any point when the tape is running e g at the start of a new recording When the tape is wound backwards it will stop at 000 if Stop at 000 is set to On Call up VCR menu Highlight Settings Call up Settings Highlight Stop at 000 Stop at 000 Switch on off Stop at 000 Settings for the video recorder Switch on off status display You can switch on off the display of the tape running function the counter the remaining tape etc If the status display is switched off it does not appear when the tape run functions are operated It can be displayed as before by using the E key Call up VCR menu
12. in the recorder instead of power save standby On the video recorder select each TV station one after the other Press the M key to call up the VCR menu each time and highlight Settings Press OK to call up Settings and highlight Decoder Select On The decoder switches on automatically if you switch to a pay TV station and decodes the incoming signal Decoder Set transmitter channel of the video recorder If transmitter channel 36 of the video recorder suffers interference from a TV station then another channel must be selected on both the TV set and the video recorder Select it on the video recorder as follows Switch the video recorder to standby time is displayed Press both station keys on the video recorder under the flap together for four seconds The selected transmitter channel is displayed on the video recorder RF 36 Choose another channel lower higher channel P P RF 38 Ain Set the TV set for station number 0 to this channel as well Refer to the operating instructions of your TV set To find the transmitter of the video recorder start playing a cassette or have it displayed by the VCR menu by pressing the M key on the remote control of the video recorder e g display on video recorder Save this setting with the stop eject key on the video recorder 23 17 04 2003 15 30 Uhr Settings for the video recorder Switch on Digital Link on the v
13. remote control If you don t know the channel number highlight Search for station and press the OK key to start the search When you have found a new station check the station name which is normally transferred with the station If no name is transferred Highlight Station name Press the OK key to change The first character of the name has a flashing underline Enter the first character here do not enter a space Use arrow keys to select a letter or a number name and again select a letter or number up to five characters When you have finished press the OK key ek Le 17 04 2003 15 30 Uhr Move to the next character of the Settings for video recorder Download stations from the TV If you have made changes to antenna or cable not satellite stations on the attached TV set the new station data must be transferred to the video recorder for TV sets with Digital Link Plus or comparable systems from other manufacturers This ensures that for direct and Timer recordings the video recorder records the correct station To transfer the station data from the TV set Call up VCR menu Highlight Stations Call up Stations Highlight Download from TV O Q D Q Automatic Search Sort Delete Download from TV gt Call up Download from TV D Display on video recorder during data transfer DLP The transfer of the station data starts immediately
14. start and stop the video recorder and set it to the Euro AV 1 input Start of play is shown immediately on the TV set regardless of which station you are watching If the TV set is off it will be switched on 17 04 2003 15 29 Uhr First installation For your safety For your safety and to avoid damage to the video recorder remote control and cassette ensure that you protect the equipment against e Damp and moisture e Knocks and mechanical stresses e Magnetic and electrical fields e Cold heat direct sunlight and extreme temperature variations e Dust e Blocked airways This equipment is designed for domestic and office environments and must not be used in rooms with high humidity e g bathroom sauna or high concentrations of dust e g workshops If the equipment is used outdoors ensure that it is protected against moisture rain dripping splashing sprayed water or dew High levels of moisture and concentrations of dust cause creep currents in the equipment which can lead to electric shock or fire The manufacturer s warranty is only valid for use in the specified permissible environment This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate Incorrect voltages can damage the equipment Lightning strikes can damage your recorder via the antenna and the power supply You should therefore remove the antenna and power plugs
15. will then come on You can only switch to other satellite stations if your TV set has two satellite tuners You can however switch to stations that can be received by antenna or cable BA_VCR_31251_020EU_GB2 13 Recording from a video recorder Camcorder To do this use the Euro AV socket 2 or the Cinch sockets on the front of the video recorder and select the socket Select socket s press repeatedly oup Display on video recorder AV2 for Euro AV socket 2 AVS for Cinch sockets at the AVS front Q O Start recording and at the same time start play on the second video recorder or camcorder Record picture from VCR tuner sound from HiFi If the sound for the TV transmission is broadcast by radio you can record the picture from the receiving unit of the video recorder and the sound from the HiFi unit For this you must feed the sound signal of your HiFi unit to the Cinch sockets on the front of the video recorder Select the television station on the video recorder Set the appropriate station on the HiFi unit Select socket press repeatedly until SC is displayed The number 5 0 after this indicates the memory location of the selected station Q Q Start recording Control video recorder with the video control bar of the Loewe TV set Loewe TV sets have a video control bar that can be called up by the V key The video control bar allows you to control the main functions of the video recorde
16. 1_020EU_GB2 16 With Teletext You want to record a broadcast and know the TV station and start time e call up the video control bar video operation using the V key call up the video menu using the M key highlight Timer recording and press OK highlight Via Teletext and press OK in the following overview select the TV station and continue with OK e the first Teletext page with the station listings of the selected transmitter is displayed Use the green key to scroll through to find the page on which the start time of the broadcast is given e when you have found the page containing the broadcast you wish to record highlight the time with the arrow keys and press OK e the record menu now appears e check the Timer data and confirm with the OK key e if the broadcast is received via cable or antenna the Timer data is transferred to the video recorder message Timer data transferred to the Digital Link Plus recorder If no cassette is inserted or the cassette has recording protection no data will be transferred Message in the video recorder s display ERROR e on the video recorder you will find the Timer data in the Timer list e highlight the line with the new Timer data and press OK to change if you want to check or set the recording to be made at normal or slow speed e save your setting if required with the M key e if the broadcast is received via the satellite tuner of the
17. 582 36 69 Fax 0212 671 80 39 2 05 03 10 0 Subject to modification 17 04 2003 15 30 Uhr
18. A_VCR_31251_020EU_GB2 24 17 04 2003 15 30 Uhr Operating other Loewe equipment with the VCR remote control The video recorder remote control can be switched to operate Loewe TV sets or Loewe DVD players These sets can be operated directly Select the equipment to be operated If you switch to TV or DVD the video recorder For TV set cannot be used Switch back to VCR or wait for Functions for Loewe TV set with MediaPlus Chassis Q2500 Indicator TV operation Indicator DVD operation Select direct operation for TV DVD VCR PIP on off Video mode with video control bar on off Call up menu in menu back to menu Teletext mode on off Select station in menu Select up down Personal Teletext pages on off Set picture format BA_VCR_31251_020EU_GB2 25 Control 201 VTR Radio operation on off Picture menu on off Switch on off standby Sound off on EPG mode on off Select station directly In menu input digits Open station time title of broadcast In menu close menu Call up main information in menu Switch on off Infotext In menu Select up Call up station list in menu Confirm Set volume in menu select or set right left Station info on off Last station The TV indicator on the remote control lights up Press again the DVD indicator lights up Press again no indicators light up VCR operation is act
19. Page 21 Stop play eject cassette All tape play functions can be stopped on the video recorder or by using the remote control Stop with remote control Alu Stop on video recorder eject STOP ARD Display on video recorder After a short delay the station selected on the video recorder is displayed Eject the cassette by re pressing the key on the video recorder Fast forward rewind You can select fast forward and rewind when no other play function is selected or the video recorder is in standby mode Q Rewind CH Forward OH Stop winding When doing a fast rewind of a cassette you can switch off using the on off key on the video recorder or the remote control When the cassette has rewound the video recorder automatically switches to standby Memory stop at 000 You can set the counter to 000 at any point on the tape e g at the start of a new recording 8 38 38 Display on video recorder If the tape is rewound it stops at 000 if the Stop at 000 function in the Settings menu is activated see Page 20 Set counter to 000 during play 17 04 2003 15 29 Uhr Daily operation Recording a TV broadcast Insert cassette without record protection lo T VAS Insert a cassette without record protection tab still in place into ZN the cassette compartment Select station If you want to start the recording manually then you must first select the television station on the vi
20. U_GB2 3 17 04 2003 15 29 Uhr Operation from video unit Switch on off in standby Stop eject mode cassette Cassette compartment Rewind Pause PLAY Fast forward Video Sound Station RECORD Open flap input here shown opened Connections to rear panel ENTREE ANTENNE EURO AV2 DECODER AUDIO SORTIE OUT AERIAL O SORTIE EURO AV1 AUDIO ANTENNE VIDEO Euro AV socket 2 EuroAVsocket1 Sound Antenna Antenna for decoder or for TV set outputs output input from recording to TV antenna or set cable system from another set BA_VCR_31251_020EU_GB2 4 17 04 2003 15 29 Uhr Welcome Thank you for choosing a Loewe product We are happy to welcome you as a customer At Loewe we combine the highest standards of technology design and user friendliness This applies equally to videos TVs HiFis and accessories Neither technology nor design is an end in itself but both are intended to provide our customers with the best possible audio and visual experience Our design is not influenced by short term fashionable trends Instead you get a high quality set that you will never tire of looking at About this equipment The video recorder is best operated with the remote control provided this can also be used to operate Loewe TV sets and Loewe DVD players ShowView is incorporated for easy programming of Timer recordings VPS ensures that any alterations to the timing of broadcasts you wish to rec
21. V set re sorting deleting adding After a change of this sort the TV set will ask you to start transfer of the changed station list The video recorder detects a connected TV set with Digital Link Plus or a similar system from another manufacturer and adjusts the video recorder accordingly This means that you cannot search for delete or sort TV stations on the video recorder The menu items are greyed out for an automatic search it is only possible to download the station data from the TV set Note that all stations that you receive via antenna or cable must be stored in station numbers 1 to 88 on the TV set If the TV set does not request you to transfer the station data then start the transfer on the video recorder Start the transfer in the VCR menu Stations Download from TV If your TV set is equipped with Digital Link Plus or with a comparable system from another manufacturer please carry out all changes to broadcasts only on the TV set If the television set that you have connected to the video recorder does not have Digital Link Plus or a comparable system then you should harmonise the video recorder and TV set station lists This will help you to find stations on the TV set and video recorder BA_VCR_31251_020EU_GB2 18 Search for TV stations on video recorder You have a TV set without Digital Link Plus or a comparable system from another manufacturer In this case you must automatically search for
22. ammed it will not switch off The video recorder also switches on if you insert a cassette If a cassette has already been inserted into the VCR the video recorder also switches on when you select one of the tape functions play gt fast forward gt gt or rewind 44 BA_VCR_31251_020EU_GB2 9 VHS cassette Insert the cassette into the compartment The video recorder draws the cassette in Press the eject button The cassette is ejected If a play function is active the unit switches to STOP first Press again to eject the cassette Ais Record protection You can protect your cassette against inadvertent over recording deletion On the back of the cassette is a tab that can be broken off Break off the tab to reveal the security slot You cannot now record onto this cassette If you cover the slot with two layers of tape you can record onto the cassette again General menu operation The menus make operation of the video recorder easier As you saw in Initial Installation the menus are displayed on the screen of the TV set The menus are Q Call up VCR menu ey Call up ShowView menu g Call up Timer list D Call up Station list Menu selections settings The lower part of the menu shows the keys for operation Highlight menu item Call up sub menu with OK Q D Select set Enter digits return to previous menu level Ol Q Save setting if required Close all menus Gre
23. connected to the wrong AV socket on the TV set The Euro AV is not fully connected Pin 10 not assigned All or some stations are stored at stations positions 88 on the TV set a TV or DVD operation is selected b Digital Link switched on Battery discharged or incorrectly fitted Two sound programme is recorded on the videotape a Decoder is not connected to the AV2 socket of the video recorder b Decoder is not registered in the video recorder menu Menu language has been set incorrectly a For station position 1 a station has been stored without time and date data or no station is stored b In the Time and date menu menu item Autom Setting is set to No a Enter Digital Link Plus in the menu or the Connection Assistant b Attach Euro AV connection to correct socket c Replace Euro AV cable with a fully assigned cable Sort stations on TV set in such a way that those received via antenna or cable are between 1 and 88 a Switch to VCR operation no indicators on the remote control illuminated b Point remote control to TV and select AV socket for several video recorders Replace batteries or install correctly Select the correct sound using the 7 key on the remote control a Connect decoder to the AV2 socket b Register the decoder as shown in the operating instructions Page 21 Set menu language as described in the operating instructions Page 17 a Implement station settin
24. d Time Manually programme change Timer Call up Timer list Select free Timer no entry only dashes or highlight the Timer to be changed Press OK key for the input D menu Station Set with the arrow keys lt or input station number with the numerical keys Then move to the next menu item respectively Day input if this figure is less than that for today it is used for the following month Enter with the numerical keys or set with the arrow keys lt E Recording type Select once Mon Fri daily weekly Recording time enter with the numerical keys of the remote control Use VPS select yes or no LP SP Select recording speed 60000 6 Save te Timer Call up Timer List E 2 OD Highlight Timer to be deleted Delete Oe You must also delete from the Timer list the Timer Data transferred from the Loewe TV set to the video recorder There is no Timer data in the Timer delete menu on the TV set You will only find Timer data there if a broadcast from a satellite station has been programmed During a Timer recording you can end the recording with the STOP key m The Timer data in the Timer list will be deleted 17 04 2003 15 29 Uhr Daily operation Programme Timer on a Loewe TV set If you have connected a video recorder to a Loewe TV set with a MediaPlus Q2500 chassis you can programme Timer recordings on the TV set as described here A cassette
25. deo recorder If recording is in progress it is not possible to change the station on the video recorder The selected station is shown in the display on the video recorder with the arrow keys on the remote control Station up down ZDF Display on video recorder With the numerical keys of the remote control 1 digitstation instantly two seconds Press keys 0 9 for one second and the station changes or press keys 0 9 briefly and the station will change after 2 digit station Press the two numerical keys short short Via the station list D Call up station list Station list AVS 04 AV3 05 AN 06 AVI 07 01 ARD 08 D ZDF 09 03 WDR 10 a Select change with OK BA_VCR_31251_020EU_GB2 12 quickly one after the other and the station changes Highlight station D Switch to highlighted station on the video recorder A with the keys P and P under the P P flap Select recording speed Use the LP key on the remote control to select the recording speed Standard Play SP is normally used If you select Long Play LP the recording time of the cassette is doubled GA Press the key to switch between SP and LP LP or SP for a cassette without record protection is shown in the display of the video recorder and in the status display For Long Play LP the picture and sound quality will be reduced When playing the video recorder will detect the reco
26. e menus via the antenna cable to the TV set if there is no Euro AV cable connection Euro AV connection Scart Connect the lower Euro AV socket of the video recorder to the Euro AV socket of your TV set A Euro AV cable is supplied with the set The Euro AV cable is the best way of making a connection to your TV set This will ensure the best picture and sound quality It also permits the playing of HiFi stereo sound and the transmission of commands and data for Digital Link and Digital Link Plus Use only a cable in which all contacts are connected together x 21 as in the cable supplied For the new generation of Loewe TV sets MediaPlus you must register the video recorder Use the Euro AV socket recommended by AV connections or the connection assistant Connections This information is provided in the operating instructions of the TV set see Operation of additional sets Register set Your video recorder has Digital Link Plus and Digital Link functions you have to activate Digital Link later on your video recorder see Page 24 you need this information when registering your video recorder If you used the Connections connection assistant for your Loewe TV set then all station data for terrestrial transmitters not satellite transmitters is transferred to the recorder For this the video recorder must be connected to the mains Follow the menus on the TV set Note On the TV set all terres
27. er If not no timer data will be stored in the video recorder e Ifa satellite recording is programmed on the Loewe TV set the cassette symbol will not flash since the video recorder e timer does not contain any data for this recording The video recorder will not eject a cassette with recording protection if the unit is switched to standby mode The recording process is controlled by the TV set You must check and observe these points to ensure that a recording from the satellite tuner of the Loewe TV set is successful The TV set must not be disconnected from the mains supply or switched off at the mains otherwise the Timer data will be lost The video recorder on the other hand may be switched off but not disconnected from the mains do not remove mains plug If for a Loewe TV set without Digital Link Plus but with Digital Link a recording is programmed on the TV Digital Link on the video recorder must be switched on see Page 23 The recording will then also be controlled by the TV set for broadcasts received via cable or antenna Picture and sound will be transferred from the TV set to the video recorder While recording the station cannot be changed unless you have another TV tuner or are playing from a second video recorder or DVD player If on a Loewe TV set a Timer recording is set to daily then Mon Fri is used on the video recorder If you want to record daily from Monday to Sunday correct it on the
28. erating instructions of your TV set Q Call up VCR menu Highlight Settings D Call up Settings AV control Voltage On Highlight Control voltage via other Control voltage off on Q 17 04 2003 15 30 Uhr BA_VCR_31251_020EU_GB2 23 Settings for the video recorder Decoder on the video recorder AV socket 2 A pay decoder is registered in the Loewe TV set as described on page 7 If you connect a pay TV decoder to the Euro AV socket 2 upper socket of the VCR mark this with Yes in the settings for the menu item Decoder at AV2 Select No if no pay TV decoder satellite tuner or other video recorder is connected Switch power save standby on off Using the key you can switch the video recorder to standby You can select either Normal standby in which the time and the cassette symbol appear darker in the display if a cassette is inserted or Power save standby in which the display on the video recorder is switched off Q Call up VCR menu Call up VCR menu Highlight Settings Highlight Settings Call up Settings Call up Settings D Highlight Decoder at AV2 via Others Power save Standb Off Decoder at Ay2 Highlight Power save standby via Others select decoder Yes No Power save standby on off If a Timer recording is programmed the unit always switches to normal standby with display
29. g broadcasts as described on Page 8 for Digital Link Plus on the TV set For satellite stations via TV automatic time date setting is not possible b Set Autom setting menu to Yes see Page 17 17 04 2003 15 30 Uhr Technical data ViewVision VV8106H Item No 63550 Dimensions in cm 36x9 5x27 LxHxW Weight 4kg Operating voltage 200 240 a c Power consumption operation 14 Watts Standby 4 7 Watts Power save standby 3 Watts Video system VHS Video colour system PAL SECAM MESECAM NTSC play only with PAL TV Sound systems NICAM stereo two sound mono Internal transmitter UHF Video heads 4 Audio heads 2 Audio head Mono audio track Tape speed Long play Standard play Tracking automatic manual Timer VPS ShowView Picture format switching Link systems Tuner systems Reception ranges Station storage locations Tuner sound systems Euro AV socket 1 Euro AV socket Video input front Audio inputs front Audio outputs Antenna signal BA_VCR_31251_020EU_GB2 Auto 4 3 16 9 Digital Link Digital Link Plus PAL B G SECAM L VHF UHF Cable Hyperband 88 NICAM Stereo two sound TV connection decoder other AV source 1 Cinch socket CVBS 2 Cinch sockets L R 2 Cinch sockets L R 2 IEC sockets IN OUT 27 17 04 2003 15 30 Uhr 27 Service addresses Australia International Dynamics Australasia Pty Ltd 129 Palmer Street AUS Richmond Victoria 3121 Tel 03 94 29 08 22 Fax 03 94 29 08 33
30. hed to the end or stopped on the video recorder Note that the Loewe remote controls for TV sets and DVD players can be switched to VCR operation so make sure these are also stored out of the reach of children BA_VCR_31251_020EU_GB2 22 Switch off automatically Five minutes after the last operation the video recorder switches automatically to Standby in Stop Mode if there is no menu open and if Autom switch off is set to Yes Call up VCR menu Highlight Settings Call up Settings Highlight Autom Switch off via others Autom Switch off Autom Switch off Yes No D Gee Control voltage via Euro AV cable The control voltage of the video recorder causes the TV set to switch over to the display of the signal Therefore at the start of play it appears immediately on the TV set If you rewind or fast forward the station received by your video recorder will be displayed on the screen of your TV set In this case you cannot switch to another station on your TV set If your TV set has Digital Link Plus you may be able to dispense with the control voltage as the TV set switches over without control voltage when the video is playing If you have connected your video recorder to the TV set without Digital Link Plus or a comparable system and de activated the control voltage you must select the AV programme on the TV set when playing This differs from set to set refer to the op
31. ideo recorder Switch on Digital Link if you have connected the video recorder to a Loewe TV set via a Euro AV cable The advantages are e the video recorder can be installed in a concealed location e the video control bar of the Loewe TV can be used e Timer recordings can be controlled from the TV set including Loewe TV sets without Digital Link Plus e g for recording from an integrated satellite tuner To switch Digital Link on the video recorder on and off o d Hold down the Pause key II then press P LINK Display on video recorder Digital Link switched on or Display on video recorder FRO NT Operation via video recorder switched on If the child lock is activated Digital Link cannot be switched on For timer recordings controlled from the Loewe TV set the recording start time is established by the TV set and picture and sound are transferred via the Euro AV cable to the video recorder With Digital Link switched on point the VCR remote control at the Loewe TV set The commands will be transferred to the video recorder via the Euro AV cable If two video recorders are connected you must select the one you want to use before operating the video recorder There are several ways of selecting the video recorder to be used Via the video operating bar of the Loewe TV set Use the V key to call up the video control bar and select with A V keys directly the set to be operated Using the E o
32. ivated 20 seconds until the remote control switches back to VCR operation automatically no indicators illuminated Functions for Loewe DVD player Indicator TV operation Select language Indicator DVD operation 9 V Select direct operation for Select sub titles TV DVDIVCR Switch on off Select camera setting standby Repeat section title total OSD menu on off DVD repeat from Select title section DVD menu via the menu Numerical keys on off Pause or still frame Remove OSD menu bar frame by frame Slow motion down Confirm menu choice on direct call up Pause single frame above Slow motion below In menu select right left On direct call up search Chapter title back search backward Chapter title forward search forwards Stop STOP PLAY 25 17 04 2003 15 30 Uhr What to do if Problem Digital Link Plus does not function No stations or not all stations that are received by antenna or cable are transferred to the video recorder The remote control is not operating The remote control does not function with the TV and DVD When playing there is a mix of sound from the TV loudspeaker A decoder connection does not function or is faulty All menus appear in the incorrect language Automatic time and date settings are not implemented 26 BA_VCR_31251_020EU_GB2 26 The video recorder has not been registered as a Digital Link Plus set The video recorder has been
33. ord are taken into consideration in the Start and End Recording commands BA_VCR_31251_020EU_GB2 5 Advantages of connection to a Loewe TV set Just like the video recorder Loewe TV sets incorporating the MediaPlus chassis are equipped with Digital Link and Digital Link Plus Both systems control the video recorder via the Euro AV cable With Digital Link you can install the video recorder in an enclosed rack or wall unit without the video recorder being visible The VCR remote control operates the video recorder via the Loewe TV set To do this Digital Link must be switched on at the video recorder see Page 24 Using the video control bar on the Loewe TV set you can also operate the most important functions of the video recorder without using the VCR remote control Should you wish to carry out Timer recordings from the satellite tuner of the TV set Digital Link will control the recording With Digital Link Plus the station data of antenna and cable stations can be transferred from the TV set to the video recorder so that the same stations appear at the same station positions in both sets In this way Timer recordings from antenna and cable stations can be easily programmed with the EPG Electronic Programme Guide on the TV set The Timer data is transferred to the video recorder which then carries out the Timer recording independently of the TV set In the case of timer data for satellite broadcasts the TV set will
34. r To do this Digital Link on the video recorder must be switched on Switch on Digital Link on the video recorder Keep pause key II pressed down P then press P NE Display on video recorder For further information on this setting see Page 24 Operate with the video control bar Me Call up video control bar on the Loewe TV set VCR CD lt lt BR gt kk e AX A i Info IQ gt M Menu V E Ben If several AV sets are connected select set Select function D Execute function Functions of the video control bar VCR on standby m Stop aa Rewind gt gt Fast forward gt Play Record Il Still frame Pause AUX switch VCR to AV1 17 04 2003 15 29 Uhr Daily operation Timer functions Overview If you want to make recordings during your absence your video recorder and the Loewe TV set offer easy programming facilities If you have a TV magazine with ShowView numbers use the ShowView Timer of the video recorder You can programme single Mon Fri daily Mon Sun or weekly recordings on the video recorder If the video recorder is connected to a new generation Loewe TV set MediaPlus Q2400 Q2500 you can easily programme Timer recordings EPG Electronic Programme Guide and Teletext are available for programming assistance In the video operation mode of the TV set call up the video menu and select whether you want to programme with the help of EPG or Teletext Wi
35. r V key close the video control bar and operate the selected video recorder via the TV set Via the AV selection of the Loewe TV set Call up the AV selection with the 0 numerical key Using the A V keys select the socket which the video recorder to be used is connected to You can now operate the selected video recorder via the TV set Via the station list of the TV set Using the OK key call up the station list of the TV set Using the arrow keys A Y lt highlight the AV socket AV1 or AV2 to which the video recorder to be operated is connected if a DVD player is also connected AV3 and press OK to switch to the socket You can now operate the selected video recorder via the TV set Repeat first installation It is worth repeating the first installation procedure if you have moved house or the video recorder is to be operated in conjunction with another TV set To start the first installation Switch the video recorder to standby Q Keep the on key on the video recorder pressed down and press the play key on the remote control gt NST Display on video recorder 1 Inst First Installation The video recorder switches on The language selection menu appears Select your language and continue with OK Enter the location of set if necessary Confirm again with OK Then carry out the station search procedure as necessary Further information can be found on Page 8 24 B
36. rding Pause recording Continue recording End recording O When the tape reaches the end the recording stops and the tape is rewound and ejected End recording STOP 17 04 2003 15 29 Uhr Daily operation Direct recording You can record the TV station that you are watching on the TV set directly without having to select the station on the video recorder For stations received via antenna or cable the video recorder detects the station that is to be recorded and uses its own receiver Pre conditions e The TV set is equipped with Digital Link Plus or is a similar system from another manufacturer e The TV set and video recorder must be connected by a Euro AV cable e A cassette without record protection is inserted into the video recorder compartment e The video recorder must be in standby mode if the unit is switched on it will use the station currently selected on the video recorder Q Q Start recording The video recorder records the station selected on the TV set You can now switch off the TV set or you can change to another station or switch to playing a second video recorder or DVD player If you are watching a satellite station on a TV set with Digital Link Plus or a comparable system then picture and sound are transferred by the Euro AV cable The video recorder sets the recording source as AV 1 In this case you can switch the TV set to standby on Loewe TV sets the red and green LEDs
37. rding speed Start recording You can start the recording by using the remote control or on the video recorder Using the remote control Q Keep the record key pressed then press the play key gt Note if Digital Link Plus is active and the video recorder is on standby the station selected on the TV will be recorded on the video recorder Open the flap REC Press the record key REC RECORD Display on video recorder 0 00 le Tape counter display on VCR The red REC display appears on the video recorder display when recording is in process Limit recording time After starting the recording you can limit the recording time in 30 minutes steps Keep the record key pressed Q T Q when recording then press the play key gt 0 30 1 00 You can set up to 4 hours 30 minutes recording time for Long Play up to 9 hours Finally the remaining recording time is displayed Display on video recorder on next press on gt etc Interrupt recording You can interrupt the recording for a maximum of five minutes by pressing the Pause key II The tape is stopped in front of the rotating video heads On re pressing the Pause key 11 the recording continues without noticeable interference Q Q If five minutes pause is exceeded the video recorder switches automatically to STOP During a pause in recording the station for the video recorder can be switched The recording can also be continued by re starting reco
38. remote control Select the equipment to be operated Functions of Loewe TV set with MediaPlus Chassis Q2500 Functions of Loewe DVD player What to do if Technical data Service addresses 17 04 2003 15 29 Uhr 25 25 25 25 26 27 28 Remote control VCR functions Indicator TV operation Control 201 VTR Indicator DVD operation Select set to be O ppm operated TV DVD VCR Bf Display close ShowView Timer Menu During stop switch to Long Play Standard Play 2 Call up VCR Menu During play Pause still frame frame by frame advance During stop station selection up down During play manual tracking In menu select position Rewind During play search backwards x 3 Press again search backwards normal Stop tape During play select sound During stop station language selection During stop select picture and sound source Switch on off in Standby Display close Timer list Counter reset During stop select station directly In menu enter digits Status display In menu close menu Start recording and Play key gt During recording add 30 minutes recording time and Play key gt Call up station list in menu call up confirm During play slow motion forwards In menu select set or to next menu Reverse play In menu select set Fast forward During play search forwards x 2 Press again search forwards normal Start play BA_VCR_31251_020E
39. rrupt recording End recording Direct recording Recording from a video recorder Camcorder Record picture from VCR tuner sound from the HiFi Control video recorder with the video control bar of the Loewe TV set Switch on Digital Link on video recorder Operate with the video control bar Functions of the video control bar Timer functions overview ShowView Timer Manually programme change Timer Delete Timer Programme Timer on a Loewe TV set Programming with EPG With Teletext 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 14 15 15 15 16 16 16 Settings for the video recorder Language Special information Time and date TV stations with Digital Link Plus Search for TV stations on the video recorder Set video recorder location Automatic search for TV stations Sort delete Manually set TV stations Transfer station from TV Settings Colour standard Switch on off memory stop at 000 Switch on off status display Picture format via Euro AV Picture sharpness Parental lock Switch off automatically Control voltage via Euro AV cable Decoder on the video recorder AV socket Switch power saving standby on off Set transmitter channel of the video recorder Switch on Digital Link on the video recorder Repeat first installation 17 17 17 17 18 18 18 18 19 19 20 20 20 20 21 21 21 22 22 22 22 23 23 24 24 Operating other Loewe equipment with VCR
40. s will be sorted according to your country Other Location Select the country in which you are operating your TV set D Confirm selection with OK The automatic search for stations will now start During the search the stations found are displayed in the list A status bar shows the progress of the search On termination of the station search the stations are sorted The menu then displays Search ended E Close menu or press the M button Q to start data transfer if a TV set equipped with Digital Link Plus is connected see page 20 You can repeat the process at any time see page 24 Daily operation Switch on switch off video recorder Use the key on the remote control or on the video recorder to switch on the unit apn The display on the video recorder shows the last station viewed If you press the key again the video recorder switches to standby The display on the video 19 24 recorder shows the time greyed out You can also set the video recorder so that it switches to energy saving standby see Page 23 The display on the video recorder is then switched off The video recorder is still connected to the mains but power consumption is reduced Five minutes after the last operation the video recorder switches automatically to Standby in Stop Mode if there is no menu open and if Autom switch off is set to Yes see Page 22 If a Timer recording is progr
41. t the AV socket on the TV set This differs from set to set Refer to the operating instructions of your TV set In this case the TV set does not have Digital Link Plus and does not respond to the control voltage of the video recorder Select station number 0 channel 36 on the TV to see VCR picture if no Euro AV cable has been fitted Tracking During play tracking is set automatically It prevents interference stripes on the video picture TRACK During automatic setting TRACK appears in the video recorder display and Tracking in the status display During play you can also set the tracking manually by pressing the arrow keys A V on the remote control Sound selection Normally both HiFi sound channels are played Stereo HiFi If for example two languages have been recorded on the cassette both languages are initially played via the AV sockets Select the required language Press repeatedly select right or left for the language The sound selection is shown on the screen In addition you can choose between Mono and Stereo In Mono it is the audio track of the cassette that is played back no HiFi sound For playback via the transmitter of the video recorder only mono playback is possible 17 04 2003 15 29 Uhr Daily operation Pause still frame frame by frame advance During play you can switch to still frame The picture is subject to interference from the system and has no sound
42. th EPG you can display the broadcasts that interest you selected by day and time station and theme Highlight the broadcasts that you want to record The Timer data will be transferred to the video recorder For programming via Teletext select the station and then search through the list for the broadcast to be recorded If the broadcast to be recorded is received by satellite the picture and sound will be transferred from the TV set via the Euro AV cable to the video recorder Up to seven programming entries per month can be made on the video recorder The video recorder is equipped with a control that ensures that in the event of a power failure the stored stations and the programmed Timer data are not lost BA_VCR_31251_020EU_GB2 14 Note the following e Ifa recording is programmed and no cassette is loaded the cassette symbol on the video recorder display flashes e Insert a cassette without recording protection into the cassette compartment e Ifa cassette with the tab removed recording protection active is inserted it will be ejected again when the unit is switched to standby mode e The cassette must of course have enough capacity for the programmed recording time e Ifa Timer recording is programmed into the video recorder the word TIMER appears above the cassette symbol e When programming a timer recording on the TV set a cassette without recording protection must be inserted in the video record
43. the station to be received on the video recorder or enter the information manually Before carrying out the automatic search enter the video recorder location country Then on completion of the automatic search a country specific sort of the stations found will be carried out Set video recorder location Call up VCR menu Highlight Stations Call up Stations Highlight Location of set Call up Location of set Q Q D D Other Location Select the country in which you are using your video recorder Confirm selection The Stations menu is displayed again Search for TV stations automatically After you have entered the video recorder location start the station search Highlight automatic search Automatic Search gt Call up automatic search Press OK to start automatic search D D During the search the stations found are displayed in the list A status bar gives you an overview of the progress of the search After the station search the stations are sorted The menu then displays a message Search ended Close menu 17 04 2003 15 29 Uhr Settings for the video recorder Sort delete As mentioned in the introduction to this section you can only sort and delete stations on the video recorder if no Digital Link Plus TV set or TV set with a comparable system from another manufacturer is connected Q Call up VCR menu Highlight
44. the video recorder on a TV set without Euro AV connection If you have not used a Euro AV cable then the menu for the first installation of the video recorder transmitter is transferred to the TV set by the antenna connection BA_VCR_31251_020EU_GB2 8 Select station number 0 on the TV set In general this station number is provided for the optimal reception of video recordings The transmitter of the video recorder is factory set to channel 36 in the UHF band If station number 0 of your TV set is not set to channel 36 then you must search for and save the video recorder transmitter Refer to the operating instructions for using the menus of your TV set to find out how channel 36 is set to station number 0 When you have found the transmitter the first installation menu will appear on the screen If the transmitter channel of the video recorder suffers interference from a television station you must switch to another channel on the video recorder see Settings for the Video Recorder Set transmitter channel of the video recorder Page 23 Settings for first installation The first time you switch on the video recorder you are requested to select a menu language for the video recorder Use the remote control arrow keys to select your preferred language D and confirm with OK 17 04 2003 15 29 Uhr You will now be prompted to give the installation location After the station search has ended the station
45. treet ISR Tel Aviv 67213 Tel 03 62 40 555 Fax 03 62 40 303 Italy General Trading SpA Via Vittorio Emanuele 33 I 50041 Calenzano Fl Tel 055 88 11 71 Fax 055 88 11 740 Malta Mirage Holdings Ltd Flamingo Complex Cannon Road M Qormi Tel 49 71 82 Fax 44 59 83 Marocco SOMARA S A 377 Rue Mustapha El Maani MA 20000 Casablanca Tel 02 22 20 308 Fax 02 22 60 006 Norway CableCom AS stre Kuller d 5 N 3214 Sandefjord Tel 033 48 33 48 Fax 033 44 60 44 Poland Piotech ul Boh Getta Warszawskiego 18 PL 81 609 Gdynia Tel Fax 058 62 43 467 058 62 45 009 Portugal Videoacustica Comercio e Representacoes de Equipamentos Electronicos S A Estrada Circunvalacao Quinto do Paizinho Arm 5 P 2795 632 Carnaxicle Tel 21 42 41 770 Fax 21 41 88 093 Slowenia Jadran Trgovsko Podjetje Partizanska cesta 69 SL 6210 Sezana Tel 057 391 402 391 406 Fax 057 391 400 South Africa THE SOUNDLAB PTY LTD P O Box 757 Parklands 2121 Republic of South Africa Tel 011 44 76 575 Fax 011 44 76 662 Spain Gaplasa S A Conde de Torroja 25 E 28022 Madrid Tel 91 748 29 60 Fax 91 329 16 75 Sweden Canseda AB Amalia J nssons Gata 19 9 421 31 V stra Fr lunda Tel 031 70 93 760 Fax 031 47 65 15 Switzerland Telion AG R tistrasse 26 CH 8952 Schlieren Tel 01 732 15 11 Fax 01 730 15 02 Turkey Enkay Elektronik Servis M d rl g Ambarlar Cad No 3 C Zeytinburnu Istanbul Tel 0212
46. trial and cable stations can be found between station numbers 1 and 88 Mains Supply Connect the video recorder to a 230V 50 Hz socket The mains plug should still be inserted even if you are not using the video recorder but wish to watch television If the video recorder mains plug is removed only a weak antenna signal is fed to the TV which can cause interference in the TV picture 17 04 2003 15 29 Uhr First installation Switching on the video recorder for the first time Switch on using the blue key on the remote control or the key on the video recorder The first installation starts LS NST Display on video recorder Picture and sound from the video recorder on a TV set with a Euro AV connection When switching on for the first time the language selection menu will appear on your TV screen If you have connected a Loewe TV set with Digital Link Plus via the Euro AV socket you will see the menu straightaway Other TV manufacturers also use similar systems with different names EasyLink Mega Logic Project 50 these will also display the menu immediately TV sets that detect the control voltage of the video recorder also show the menu immediately If you have connected a different TV set via the Euro AV socket select the AV socket on the TV set to which the video recorder is connected This varies from set to set Refer to the operating instructions of your TV set Picture and sound from
47. without recording protection must be inserted in the video recorder otherwise no timer data will be transferred to the video recorder Programming with EPG e search for the broadcast in EPG and highlight it e press the red record key e the record menu appears e check the Timer data and confirm with the OK key e if the broadcast is received via cable or antenna the Timer data is transferred to the video recorder message Timer data transferred to the Digital Link Plus recorder If no cassette is inserted or the cassette has recording protection no data will be transferred Message in the video recorder s display ERROR e on the video recorder you will find the Timer data in the Timer list e highlight the line with the new Timer data and press OK to change if you want to check or set recording to normal or slow speed e save your setting with the M key if required e if the broadcast is received by the satellite tuner of the Loewe TV set the Timer data is stored in the TV set message Timer data stored e how to find the timer data for satellite recordings in your TV set In video mode call up the video menu select Timer change and delete and call up with OK There is no entry in the Timer list of the video recorder Insert a cassette without record protection Select the record speed SP or LP as described above because this setting cannot be done via Digital Link Plus BA_VCR_3125
48. yed out menu items cannot be called up This is the case when a TV set with Digital Link Plus is connected 17 04 2003 15 29 Uhr Daily operation Play cassette If you have a pre recorded cassette you can now play it If you don t have a pre recorded cassette refer to the recording section CE Insert a cassette WHS If the record protection tab on the cassette has been broken off play starts immediately even if the video recorder was switched off When you insert a cassette a cassette symbol appears on the video recorder display If a cassette without record D protection is inserted start play Q with the gt key on the video recorder or on the remote control pray In both cases PLAY is displayed on the video recorder followed by the tape counter hours minutes 0 08 le seconds Now you can watch the tape in the video recorder playing on your TV screen SER 44 w 0 00 12 U PLAY HiFi The screen below briefly displays the status display as follows SP standard play speed Play HiFi for the sound reproduction of HiFi sound tracks tape counter display and a status bar for remaining play time The status display can be switched off see Page 21 BA_VCR_31251_020EU_GB2 10 OH Stop playing Play also stops at the end of the tape The tape will then rewind automatically If play does not appear and the sets are connected by a Euro AV cable you must selec
Download Pdf Manuals
Related Search