Tube Cutter Operating Instructions (SR-PC-TC, R3)
Contents
1. SR PC TC R3 weeteseysts PM Page 1 Smoadde Tube Cutter Part No MS TC 308 S The Swagelok Tube Cutter is designed to cut tubing materials from 3 16 to 1 in 4 to 25 mm OD Operating instructions 1 Position tubing between rollers and cutting wheel Turn handle until wheel touches tubing Advance handle an additional 1 8 turn The handle knobs are spaced in 1 8 turn increments Use them as reference points Rotate cutter around tube After every second rotation advance handle 1 8 turn W N A continued SR PC TC R3 nantu PM Page 2 For softer materials advance handle after EACH rotation 5 Continue until tubing is cut through Deburring Remove all burrs from the tubing ID and OD Failure to do so may affect the fitting s sealing capability and system cleanliness Replacement Wheels Always use a sharp wheel since this is the best way to minimize burring Using a dull wheel will also expand and work harden the tube end Note Occasionally lubricate working threads www swagelok com w Each cutter is shipped with a spare wheel Extra wheels are available in packs of five part no MS TCW 308 from your Swagelok representative Replace wheel when cutting becomes difficult or end of tube begins to expand To replace wheel 1 Open slide at least half way by turning handle counter clockwise 2 Remove screw holding wheel in place 3 Take out old wh2. eel and replace with new one 4 Replace screw Swagelok TM Swagelok Company 2004 Swagelok Company Printed in U S A CP February 2004 R3 SR PC TC yw 4
Download Pdf Manuals
Related Search