Operating instructions
Contents
1. output voltage rises to unacceptable values gt 14 V by a malfunction of the power supply e g disruption of the control system or external influence an independent second monitoring circuit is activated which swit ches off the power supply A deletion of this condition can only be done by separating the power supply from the mains After a wai ting period of about 1 2 minutes the monitoring circuit is reset in response to the pre existing supply voltage and the power supply can be re connected to the mains If the malfunction is not resolved then the described process is repeated again 6 Meaning of status LED s POWER green permanentyon on Unit is ready rhythmic flashing of both LEDs indicates the idle ot the module Unit is off operating voltage not applied OVERLOAD permanentyon on Overload on the output for example to many consumers rhythmic flashing of both LEDs indicates the idle of the module fff Load is within limits If both LEDs are off first the power supply must be checked Otherwise the safety circuit can be triggered which requires a power interruption of 2 minutes QUASARIOS Part N 5151 01 7 Technical data Electrical characteristics Main voltage Mains frequency Mains connector Power consumption Power factor Nominal output voltage Ripple noise ratio Current drain Current limit Short circuit protection Overvoltage protection Internal fuse Protection class Protecti2. BLANKOM Professional Headend Solutions Operating instructions Power supply module 12 V 20 A QUASARIOS gt gt Part N 5151 01 ae Sefii Sispuals SHASARIOS Contents 1 Safety and operating instructions Device variants General Device view 4 1 Front view 4 2 Rear view Functional description Meaning of status LED s Technical data Bibliography Document history C Declaration of Conformity QUASARIOS Part N 5151 01 Power supply module 12 V 20 A 1 Safety and operating instructions When assembling starting up and adjusting the modules it is necessary to consider the system specific references in the manual instruction The modules may only be installed and started up by authorized technical personnel When assembling the modules into the receiving points the adherence of the EMC regulations is to be secured The assembly and wiring have to be done without voltage All active modules may only be operated with the power supply HELIOS HELIOS P1 or QUASARIOS The main voltage and the operating voltage of the modules working by DC have to be in complience to the operating parameters described in the technical data With all work the defaults of the DIN EN 50083 have to be considered Especially the safety relevant execution of the DIN EN 60728 11 1 is necessary The QUASARIOS module comes under protection classification It is absolutely necessary therefore to insert the
3. ic shock Common aspects for installation and equipment IEC 61140 2001 A1 2004 modified German version EN 61140 2002 A1 2006 5 DIN VDE 0871 Radio noise suppression of high frequency units Determination of limits for industrial scientific and medical equipment identical with CISPR 23 1987 9 Document history Version Date Modification 1 00 29 08 2012 basic document Options available upon request Subjects to changes due to technical progress BLANKOM Antennentechnik GmbH Hermann Petersilge StraBe 1 07422 Bad Blankenburg Germany Phone 49 0 3 67 41 60 0 Fax 49 0 3 67 41 60 100 C Declaration of Conformity The Manufacturer BLANKOM Antennentechnik GmbH Hermann Petersilge Str 1 07422 Bad Blankenburg Germany herewith declares the conformity of the product Product name Power supply module 12 V 20 A Type QUASARIOS Product number 5151 01 according to the following regulations EN 50083 2 2 EN 60728 11 1 as far as relevant and additional device specific regulations enclosed above which this product is subjected to Date 29 08 2012 Signature a Dr Piero Kirchner Managing Director
4. mains plug into a fused socket The ventilation slots of the modules are to be kept absolutely free When rail mounting the DIN rail clip is mounted with the supplied countersunk screws M4 enclosed in the accessory tray The enclosed support foot is mounted to the corresponding mark on the rear panel see 4 2 At the rear there is a connection option for equipotential For installation of the protective conductor lens M4 serrated lock K gt gt De BP RBPRPPRP SO washer and lock washer enclosed in the accessory tray should be used WEEE Reg Nr DE 50389067 2 Device variants QUASARIOS 5151 01 Power supply 12 V 20 A 100 240 V input 3 General The Smart Business Line SBL is a modern head end system that is distinguished by its modular and compact design A user friend ly operating concept facilitates setup configuration and maintenance of the system The QUASARIOS is a power supply 20 amps of the SBL The status of the module will be displayed by LED s QUASARIOS Part N 5151 01 Power supply module 12 V 20 A 4 Device view 4 1 Front view 4 2 Rear view Attachment points for DIN rail clip Operating voltage LED OVERLOAD red LED POWER green Connecting terminal for equipotential bonding Power supply connection Mark for support foot for DIN rail mounting 5 Functional description The QUASARIOS module is designed specifically for SBL and serves as a power s
5. on standard 8 Bibliography 1 EN 60728 11 Cable networks for television signals sound signals and interactive services Part 11 Safety Power supply module 12 V 20 A 100 240 V 10 5 47 63 Hz built in connector according DIN EN 60320 1 IEC 60320 C14 3 max 260 W 0 98 12 V 66 dB 0 4 20 A yes 22 A typical yes yes lt 14 5 V reset requires 2 minutes mains separation G5 x 20 T4A IEC 127 2 V according DIN EN 61140 VDE 0140 1 4 IP 20 IEC 60728 11 2005 German version EN 60728 11 2005 Radio noise suppression Environmental conditions Temperature range Relative humidity Mounting method Mounting location Miscellaneous Dimensions I x w x h Weight Delivery contents according DIN VDE 0871 curve B 5 EN 50083 2 2 10 55 C lt 80 not condensing vertical splash proof and drip proof 76 x 262 x 167 mm ca 1 550 g 1x power cord 1x DIN rail clip 1x mounting accessories 2x dummy connector 1x ground mount kit 2 EN 50083 2 Cabled distribution systems for television and sound signals Electromagnetic compatibility for equipment EN 50083 2 2001 3 EN 60320 1 Appliance couplers for household and similar general purposes Part 1 General requirements IEC 60320 1 2001 A1 2007 German version EN 60320 1 2001 A1 2007 Corrigendum to DIN EN 60320 1 VDE 0625 1 2008 05 4 DIN EN 61140 VDE 0140 1 Protection against electr
6. upply for the processing units The arrangement of the power supply must be carried out in such a way that shortest possible cable lengths to the modules and so only small voltage drops results This is best achieved by an arrangement of the power supply in the middle of the processing units so that a distributi on of the current on the two output connectors takes place The total current consumption of the connected modules do not exceed the maximum current supply of the QUASARIOS The unit has also a small current reserve which ensures even under adverse conditions e g at elevated ambient temperature the safe opera tion The technical planning has to ensure that the QUASARIOS is carrying on only in the nominal range There the current requirement of LNB s pre amplifier or similar which are possibly connected to the processing units is also to be considered The module has an active startup current limitation which is effective in hot and cold start and power failures and limits the input current pulse to values below 50 A An active PFC power factor correction ensures that an essentially sinusoidal current is drawn the mains and thus only little noise can be generated The optimized internal design with modern components also ensures for a very high efficiency and low temperatu re rise The QUASARIOS is insensitive to output side transients glitches they are limited by a suppressor diode The module has an overvoltage shutdown If the
Download Pdf Manuals
Related Search