Husky TA-2530B Instructions / Assembly
Contents
1. the sight glass Avoid overfilling by adding oil gradually and checking the oil level with the sight glass several times Add enough oil to reach the Max level on the sight glass Proper oil level is illustrated here Breaking in the pump Check and tighten all bolts and fittings Open the air flow by turning the pressure regulator knob G fully clockwise Place the AUTO OFF switch B in the OFF position and plug in the power cord Open the drain valve K Place the AUTO OFF switch B in the ON position and run the air compressor for 10 minutes Place the AUTO OFF switch B in the OFF position Close the drain valve K HUSKYTOOLS COM Please contact 1 888 43 HUSKY for further assistance2. Pre Assembly PACKING LIST Before assembling and operating this air compressor ensure the following items are identified in the packaging Air compressor Air filter L Wheel assembly package includes 2 wheels D 2 shoulder bolts AA 2 nuts BB and 2 lock washers CC Handle assembly package includes 1 Handle A 4 screws DD 4 flat washers EE Oil bottle M TOOLS REQUIRED THA ze O kan A 5 mm Hex key HARDWARE INCLUDED A NOTE Hardware not shown to actual size ay O 2 __AA CG QO op O Part Description Quantity AA 10 mm shoulder bolt 2 BB 10 mm nut 2 CC Lock washer 2 DD 6 mm screw 4 EE 6 mm flat washer 4 Pre Assembly continued PACKAGE CONTENTS Part Description Quantity Handle Manual AUTO OFF switch Safety valve Wheel Tank Quick coupler Pressure regulator knob Tank pressure gauge Regulator pressure gauge Rubber foot Drain valve Air filter zlem xlel i Il lolnimi ojojo Oil bottle ak k K mk mi at ai ee ee l Mm HUSKYTOOLS COM Please contact 1 888 43 HUSKY for further assistance Assembly 1 Assembling the wheels With the offset hub of a wheel D facing the tank s wheel bracket assemble a 10 m
3. m shoulder bolt AA through the holes in the wheel and tank wheel bracket Place a lock washer CC onto the threaded end of the shoulder bolt AA Then place a 10 mm nut BB on the threaded end of the bolt AA and tighten securely Repeat for the other wheel D Assembling the handle Insert the two open ends of the handle A into the handle brackets on the air compressor tank Align the holes in the handle bracket with the threaded holes in the handle A Attach the handle A to both sides of the air compressor using 6 mm flat washers EE and 6 mm screws DD Tighten securely 3 Attaching the air filter Insert the threaded end of the air filter L into the threaded port of the pump head Do not apply thread tape to the air filter assembly s threads Rotate clockwise to tighten Hand tighten only Assembly 4 Air compressor lubrication CAUTION This unit is shipped without oil in the pump Follow these lubrication instructions before operating the compressor Add oil to the pump using the oil bottle M The compressor pump holds approximately 380 ml 13 oz of oil The sight glass located on the crankcase portion of the pump is used to maintain proper oil level The Max oil level is when the oil is in the center of the dot in the middle of the sight glass Min oil level is at the bottom of the dot in the center of
Download Pdf Manuals
Related Search