Wagner 0503040 Installation Guide
Contents
1. A Important Safety Information Read all safety information before operating the equipment Save these instructions surface and erected at safe working angles Avoid power lines Keep moveable items secured and steady while scraping Always use protective eyewear when working Stay alert and use common sense when operating any tool NO OV contain chemicals known to the state of California to cause birth defects or other reproductive harm An example of a chemical would be lead from lead based paints do not use a heat tool to remove lead based paint Your risk from exposure varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a ventilated area and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles Some dust peelings residue and vapors caused by paint removal activities Grounding Instructions This product must be grounded In the event of an electrical short circuit grounding reduces the risk of electric shock by providing an escape wire for the electric current This product is equipped with a cord having a grounding wire with an appropriate grounding plug The plug must be plugged into an outlet that is installed properly and grounded in accordance with all local codes and ordinances WARNING Improper installation of the grounding plug can result in a risk of electric shock If repa2. ir or replacement of the cord or plug is necessary do not connect the green grounding wire to either flat blade terminal The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire and must be connected to grounding pin Check with a qualified electrician or serviceman if the grounding instructions are not completely understood or if in doubt as to whether the product is grounded properly Do not modify the plug provided if it will not fit the outlet have the proper outlet installed by a qualified electrician This product is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch A A temporary adapter that looks like the adapter illustrated in sketch B and C may be used to connect this plug to a 2 pole receptacle as shown in sketch B if a properly grounded outlet is not available The temporary adapter should be used only until a properly grounded outlet sketch A can be installed by a qualified electrician The green colored rigid ear lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover Whenever the adapter is used it must be held in place by a metal screw A
Download Pdf Manuals
Related Search