Glacier Bay 67392-6104 Installation Guide
Contents
1. Attaching the quick connecting hose o Attach the quick connecting hose I connections to the hot faucet handle B connection faucet body A connection and cold faucet handle C connection Push until the connections snap together o Pull down moderately to ensure the connection has been made 7 HOMEDEPOT COM GLACIERBAY Please contact 1 855 HD GLACIER for further assistance Installation continued 1 Making the water supply connections o Use 1 2 in P S faucet connections 2 or use supply line coupling nuts 3 not included with a 3 8 in 0 D ball nose riser 1 A NOTE Before tightening the faucet connector to the water supply apply a second wrench to the supply tube fitting This will prevent the supply tube from moving or twisting when tightening the faucet connector Do not overtighten Operation 1 Flushing and checking for leaks IMPORTANT After installation is complete remove the aerator with the plastic wrench U to flush the water lines o Ensuring the handles are in the off position turn on the water supply and check for leaks If you discover any leaks check your connections to ensure they are installed properly o Remove the aerator and housing if applicable Turn on the hot and cold handles to allow the water to run for at least one minute This flushes away any debris that could cause damage to internal parts o Turn off the water and reins2. Model SKU F GLACIER BAY et 2 INSTALLATION AND CARE GUIDE TWO HANDLE LAVATORY FAUCET Questions problems missing parts Before returning to the store call Glacier Bay Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 855 HD GLACIER 1 855 434 5224 HOMEDEPOT COM GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this lavatory faucet We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Glacier Bay THD 12 2014 REV 01 Table of Contents Important Informati0N ccconccnnennanannas 2 ISA ATION sss sasecscsscsecedssssessvscscesedecsseasseras Wanna eiii 2 ODO OM PAROBEFERRERNNERRSPRREREEFERF RERFERSEHNE ERNEERE Pre Installation wid Care and Cleaning suda Planning Installation oo onocconn 2 TroubleshootiNg cccoccononcnancnencnencnanrans Tools and Hardware Required 2 Service Parts wwiscccescecsccesnctses coacssessecsecrsens Package Contents Important Information o Observe all local plumbing and building codes o Cover the sink drain to avoid losing any parts o Review the care and cleaning section included in this guide Warranty LIMITED LIFETIME WARRANTY Glacier Bay products are manufactured with superior
3. d lock nut H and washers G from the new faucet A Place the faucet A through the mounting holes in the sink Ensure the slot openings of the washer G face toward to the rear of the sink Secure the faucet A to the sink using the lock nut H provided A NOTE The hot water valve is identified with a label o Remove the preassembled nuts E and washers D from the hot and cold faucet handles B and C o Loosen the screws F on the nuts E until the ends of the screws F are flush with the face of the nuts E o Insert the hot faucet handle B to the left of the spout and cold faucet handle C to the right of the spout o Attach the faucet handles B and C underneath the sink using the washers D and nuts E Securely tighten the screws F on the nuts E Installation continued 3 Preparing the pop up assembly 4 Installing the drain body o Remove the pop up stopper J and drain o Apply silicone sealant not included under the flange K from the drain body drain flange K and place the drain flange K into the drain hole of the sink o Screw the lock nut M all the way down and push the rubber washer L down o From underneath the sink screw the drain body N onto the drain flange K Ensure that the opening 1 for the ball rod on the drain body N faces towards the rear of the sink o Tighten the rubber washer L and lock nut M on the drain bo
4. dy N Do not overtighten 5 HOMEDEPOT COM GLACIERBAY Please contact 1 855 HD GLACIER for further assistance Installation continued 5 Installing the stopper and ball 6 Installing the lift rod rod uE a Insert the lift rod T through the faucet A and NOTE In shallow cabinet installations the ball rod P ma i i A A need to be shortened Use a hack saw to cut the sane Hig down into the lift rod strap S Tighten the rod away from the ball to the desired length thumb screw R o Insert the stopper J into the drain hole in the sink o Remove the lift rod strap S and spring clip Q from the ball rod P o Remove the ball nut 0 Insert the ball rod P into the drain body N and through the hole of the stopper J See insert 1 T o For easier removal and cleaning rotate the stopper J 90 degrees so that the ball rod P does not go through the hole in the stopper J See insert 2 y o Secure the ball nut 0 against the hole in the drain body N and tighten the ball nut 0 onto A the threaded end Do not overtighten Installation continued 7 Attaching the ball rod and strap 8 Adjusting the lift rod o Attach the ball rod P to the lift rod strap S o Loosen the thumb screw R on the lift rod using the spring clip Q strap S o Push down on the lift rod T until the drain stopper is in the open position Retighten the thumb screw R
5. is missing or damaged do not attempt to install the product Contact customer service for replacement parts TOOLS AND HARDWARE REQUIRED Y ES TA Satety pte Channel SG Supply Ion in 35 ll wrench goggles 7 sealant lock pliers lines screwdriver wrench Pre Installation continued PACKAGE CONTENTS Faucet Assembly Drain Assembly Je De gt y K O nw 1 IS A NOTE ltems J 0 come pre assembled Part Description Quantity Part Description Quantity A Faucet body 1 J Pop up stopper 1 B Handle assembly 4 K Drain flange 1 Hot L Rubber washer 1 Handle assembly M Lock nut 1 E Cold i N Drain body 1 D Washer 2 0 Ball nut 1 E Nut 2 P Ball rod 1 F Screw 4 Q Spring clip 1 G Washer 1 R Thumb screw 1 H Lock nut 1 S Lift rod strap 1 Quick connecting 4 T Lift rod 1 hose U Plastic wrench 1 HOMEDEPOT COM GLACIERBAY Please contact 1 855 HD GLACIER for further assistance Installation 1 Installing the faucet assembly 2 Installing the faucet handles CAUTION Always turn off the water supply before removing an existing faucet or replacing any part of a faucet Open the faucet handle to relieve water pressure and ensure that the water is completely shut off Shut off the water supply Remove the old faucet Clean the mounting surface Remove the preassemble
6. licone sealant to the beveled side of the drain flange Retighten and test for leaks HOMEDEPOT COM GLACIERBAY Please contact 1 855 HD GLACIER for further assistance Service Parts Faucet ID tags can be found on the hot water inlet Part Description Part Number Part Description Part Number 1 Handle RP13149 12 Aerator RP30123 2 Set screw RP50002 13 Plastic wrench RP30040 3 Connector RP50003 14 Washer RP64193 4 Inverter RP64044 15 Nut RP56062 5 Bonnet nut RP70193 16 Block RP70421 6 Cartridge H RP20013 17 O ring RP60002 7 Cartridge C RP20014 18 Quick connecting hose RP70430 8 Flange RP80296 19 Lift rod amp lift rod knob RP40102 9 Washer RP64147 20 Pop up assembly less RP40027 10 Nut RP56059 lift rod 11 Screw RP50004 Specify Finish Many replacement cartridges aerators and drain 10 assemblies can be purchased at your local The Home Depot store or online at HOMEDEPOT COM Pg GLACIER BAY Questions problems missing parts Before returning to the store call Glacier Bay Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 855 HD GLACIER 1 855 434 5224 HOMEDEPOT COM GLACIERBAY Retain this manual for future use
7. quality standards and workmanship and are backed by our limited lifetime warranty Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship We will replace FREE OF CHARGE any product or parts that proves defective Simply return the product part to any of The Home Depot retail locations or call 1 855 HD GLACIER 1 855 434 5224 to receive the replacement item Proof of purchase original sales receipt from the original consumer purchaser must be made available for all Glacier Bay warranty claims This warranty excludes incidental inconsequential damages and failures due to misuse abuse or normal wear and tear This warranty excludes all industrial commercial amp business usage whose purchasers are hereby extended a five year limited warranty from the date of purchase with all other terms of this warranty applying except the duration of warranty Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province Please see a store or contact 1 855 HD GLACIER for more details Pre Installation PLANNING INSTALLATION Before beginning the installation of this product ensure all parts are present Compare parts with the Package Contents list If any part
8. tall the aerator and housing if applicable XX eS 8 EIS RR RR lt gt x SOX SS 2 OS Zy eee ve OS S Operation continued 2 Removing the quick connector o Ifitis necessary to remove the quick connector 1 squeeze the tabs 2 on the quick connector and then pull down to disconnect Squeeze mm Care and Cleaning o To clean wipe down with a damp cloth and towel dry o Do not use abrasive cleaners steel wool or harsh chemicals when cleaning this faucet or the warranty will be voided Troubleshooting a detailed drawing showing the location of the parts listed below A NOTE Refer to the service parts section in this manual for Problem There are leaks from the handle Possible Cause The bonnet nut has come loose and or the washer is dirty or damaged Solution Tighten the bonnet nut Clean or replace the washer The aerator has an irregular or reduced water flow The water will not shut off completely The aerator is dirty or mis fitted The cartridge is dirty or broken This faucet features an easy clean aerator Gently rub your fingers against the face of the aerator to break away any debris or build up Remove the handle to check the cartridge Clean or replace Leaking from sink drain at the base of the sink Rough or irregular surface on sink Apply additional si
Download Pdf Manuals
Related Search