Minka Lavery 5136-84 Instructions / Assembly
Contents
1. COMPLETING THE INSTALLATION Fig 1 7 Place the fixture body F over the mounting bracket B and secure with mounting screws E Size 8 32 0 5 L 8 Install the light bulbs included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Your installation is now complete Return the power to the junction box and test the fixture Note Illustration Fig 1 on this manual is for installation purposes only It may or may not be identical to the fixture purchased Fig 1 Set A 021 190104 Hanging bracket Ground screw Mounting screws 4 Junction box screws 2 Wood screws 2 Anchors 2 l Fig 2 W a FIXTURE FIXTURE WIRES 1 WIRES Black White l 1 1 l FIXTURE 1 WIRES Green or Bare 1 Copper Ground l 1 1 l l HOUSE WIRES JOUSE WIRES Black Hot Green or Neutral Bare Copper Ground american cf US lighting usten ESSAN2. INSTALLATION INSTRUCTIONS FOR 5136 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER d AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR READ AND SAVE THESE INSTRUCTIONS PREPARATION Fig 1 1 Shut off the power at the fuse box or circuit breaker If necessary remove the old fixture including the mounting hardware 2 Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration MOUNTING THE FIXTURE Fig 1 3 Position the mounting bracket B on the wall and mark the location of the two dry wall anchors A Pre drill the holes for the drywall anchors A and insert the drywall anchors A into the wall 4 Attach the mounting bracket B to the junction box using the junction box screws D Size 8 32 0 6 L The side of the mounting bracket marked GND must face out 5 Place the wood screws C through the mounting bracket B and into the drywall anchors A to secure the mounting bracket B to the wall righ pate THE WIRES Fig 2 At this point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the mounting plate using the green screw provided After the wires are connected tuck them carefully inside the outlet box
Download Pdf Manuals
Related Search