Candice Olson 8218-5H Instructions / Assembly
Contents
1. twist the wire connector onto wire WIRES IRES a a n z 3 If your outlet box has a grounding wire Green or bare sehr RIBBED ART copper Attach this wire and the bare copper wire from the ae fixture together as step 1 If outlet box has no ground wire wee Wiens Attach the bare copper fixture wire to the green ground screw WHITE GREEN OR BARE on the cross bar NEUTRAL COPPER l m GROUND 4 Tuck these wires connectors neatly into the ceiling out let box and raise the collar ring L and thread onto collar loop J protruding through canopy Your installation is now complete Return power to the junction box and test the fixture2. INSTALLATION INSTRUCTION FOR FIXTURE 8217 5H 8218 5H WARNING SHUT OFF THE POWER AT FUSE OR CIRCUIT BREAKER ASSEMBLY THE FIXTURE FIG 2 1 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for Fig 2 C _ ooa o amp CAP NUT B installation 2 Thread the tube G onto the nipple H tightly then put the cap aa D over the nipple E and secure with hex nut C Install the f SIDE RODE fixture loop A on j TuE 3 Install the top end of the side rod F onto the cap D and secure with cap nut B 4 Install the frame N fabric shade K by protruding the bottom end of the side rod F through the holes of the frame N and fabric shade K and locking them in place with cap nut I A CAP NUTO 5 Thread the stem M into the coupling L and secure with hex nut i SHADE 6 Insert the tube O check ring P plastic washer Q round K STEM WITH HEX NUT M acryl panel R amp steel washer S over the stem M in order Kh o Pa ee and secure with finial T tightly BLASTIO WASHER Q 7 Install the light bulb in accordance with fixture s specifications eee ee STEEL WASHER S DO NOT EXCEED THE MAXMUM WATTAGE RATING ae MOUNTING THE FIXTURE FIG 1 1 Shut off the power supply at the fuse box or circuit breaker box Fig 1 Remove the old fixture from ceiling Including the cross bar 2 T
3. hread the nipple l into the collar loop J until snug 3 Thread the other end of nipple l into the cross bar F until snug es 4 Place lock washer E over the end of nipple I protruding through cross bar F and thread hex nut D onto nipple until tight 5 Take this crossbar assembly and mount to ceiling outlet box A a using outlet box screw H tightly The side of cross bar marked with GND must face out J 6 Connect one end of chain N onto the fixture loop using the chain link M 7 By measuring determine correct number of links needed for i proper hanging height i 8 Lace the fixture wires through the chain y 9 Slip collar ring L over the chain then do the same with ie canopy k au 10 Connect the other end link of the chain N to the collar fi N loop J using the chain link M j 11 Feed the fixture wires through the collar loop J and nipple l and mU j 5 Too So Ge pull until taut CONNECTING THE WIRE See fig 3 P ue 1 Take the black wire from the ceiling outlet box and the smooth the spon ernie tor the ihstallahon only wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug 2 Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wire together in the same Fig 3 FIXTURE FIXTURE lt gt FIXTURE lt gt direction then
Download Pdf Manuals
Related Search