Ideal Pet PPDM Instructions / Assembly
Contents
1. ORIGINAL PET DOOR INSTALLATION TOOLS REQUIRED FOR INSTALLATION Hammer and Awl or Nail Drill and 3 8 Drill Bits e Sabre Saw e Phillips Screwdriver Safety Goggles 1 DETERMINE TEMPLATE PLACEMENT For Original plastic pet door use PLASTIC SLIDE AS TEMPLATE center template width in middle of door hold in place Measure your pet at shoulder and position the top of the template 2 taller than your pet s shoulder Important Under no circumstances should the bottom edge of the rough opening be less than 3 from the bottom edge of the wood door 2 OUTLINE PET DOOR OPENING With PLASTIC SLIDE TEMPLATE held in place use a pencil to draw around the edge of template onto door Use a nail or awl to mark four inside edge corner holes for drilling 3 DRILLING HOLES Drill the four 3 3 diameter individual corner holes 4 CUTTING THE OPENING Using a sabre saw begin with one of the corner holes and carefully cut along the pencil line 5 ASSEMBLY amp ADJUSTMENT Insert outer frame no flap into opening from exterior side Make certain frame is flush with door surface Caulking is recom mended under outer frame Place inner frame with flap into opening from inside of door hold in place then install screws and tighten until snug Do not over tighten As with any home improvement project if you do not have the tools or skills to properly install your pet door we suggest using a professional handyman or licensed2. contractor
Download Pdf Manuals
Related Search