none 8234005 Instructions / Assembly
Contents
1. should be close to equal space at the top and latch side as possible Shims Place shims at door hinge area Smooth Side of Holder against Wall Screw Side of Holder Hinges Stop Side Side F g g A g g gs d Pan Head Screw Rough Opening Inside Jow do _ Rough Opening Inside T ED Q an 34 Shim at Hinges Area aR w Ah iL _ Rough Opening Inside Door Holders2. Install A Door DOOR HOLDER Instructions 1 Install four HOLDERS on the stop side of the rough opening horizontally and four HOLDERS on the hinge side vertically Make sure HOLDERS are smooth side to the wall and snug You may need to adjust later Note Holes for HOLDERS are 6 down and 3 4 over from the rough opening Bottom holes are 6 up and from the bottom 3 4 over See illustration 2 Place door amp frame into rough opening Hinges facing you 3 Turn HOLDERS 90 degrees horizontal on the frame 4 places 4 Center Door and Frame into rough opening Make adjustments and shim at the top sides of the frame This should center door frame into rough opening 5 Level Hinge side first Place shims at hinge area and nail 6 Place shims on the Latch side making sure reveal is equal space between door and frame Open and close door to check operation If correct nail into place Note About same location as hinge side 7 Cut all shims level with wall and remove HOLDERS 8 Trim door out 9 Door Install Complete SEE NOTES Doors always open into room Hinges go on room side Door Holder Smooth side of holder always goes against the wall Mounting of Holders Holes for holders and screws are 6 down and 3 4 over from rough opening and 6 up from the bottom and 3 4 over Holders Mount to backside of wall Opposite door opening side Reveal space between the frame and door
Download Pdf Manuals
Related Search