Mayne 580D00000 Instructions / Assembly
Contents
1. No Dig Ground Anchor Installation MISO16 Package Contents e 1x No Dig Ground Anchor 1x Rebar 5x Lag Bolts Materials Required 4x4 Wood Post 48 inch length recommended not included Tools Required Cordless drill 7 16 socket bit tape measure amp level General Information Read instructions carefully before beginning assembly e Please refer to local codes and regulations before installing your ground anchor e No Dig Anchor performs best in standard soil conditions not suitable for rocky or sandy conditions e When using the ground anchor with a mail post installation please note that USPS regulations require the front of the mailbox to be set back 6 8 inchdes from the curb In the event of missing or defective parts please call our customer service department toll free at 1 866 363 8834 or send an email to info gomayne com With downward pressure twist into the ground ground anchor saddle as shown below Secure using the piece of rebar provided Every few the post to the anchor using the 5 lag bolts turns check that the anchor is straight provided ED Place the ground anchor in the desired location Insert the 4x4 wood post not included into the Ground Screw Road Curb Grass Slide the decorative mail post sleeve over the wood post and anchor assembly The bottom of the decorative post should sit flush on the ground Some extra force may be required for the sleeve to pop over the saddle and bolts on2. the ground anchor MAYNE Outdoor Products of Distinction www gomayne com
Download Pdf Manuals
Related Search