Rockwell RK9011 Use and Care Manual
Contents
1. like the plug itustrated in Sketch D in Figure 1 Make sure the tool is connected to an outlet having the same configuration as the plug No adapter is available or should he used with this tool Ifthe tooi must he reconnected for use on a different tyne of electric circuit the reconnection should he made by qualified service personnel and after reconnection the tool should comply with all local codes and ordinances 4 Permanently connected tools This tool should be connected to a grounded metal permanent wiring system orto a system having an equipment grounding conductor B FOR ALL DOUBLE INSULATED TOOLS Replacementparts When servicing use only identical replacement parts 2 Polarized Plugs To reduce the risk of electric shock this equipmenthas a polarized plug one blade s wider than the other This plug willfitina2. __llse only 3 wire extension cordsthat Sanding sleeves Table inserts Rubber sanding drums Drum washers Hex wrench fo aae oe We recommend that you purchase your accessories from the same store that sold you the tool Use good quality accessories marked with a well known brand name Choose the type according to the work you intend to undertake Refer to the accessory packaging for further details Store personnel can assist you and offer advice READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE INSTRUCTIONS PERTAINING TO A RISK OF INJURY GENERAL A GROUNDING INSTRUCTIONS 1 All grounded cord connected tools In the event of a malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This tool is equipped with an electric cord having an squinment grounding conductor and a grounding piug The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances Do not modify the plug provided ifitwill notfit the outlet have the proper outiet installed hy a qualified electrician Improper connection of the equipment grounding conductor can resultin a risk of electric shock The conductor with insulation having an outer surface thatis green with or without yellow stripes is the equipment grounding conductor if repair or replacement of the electric cord or plug is necessary do not
3. connect the equipment grounding conductor to alive terminal Cheek with a qualified electrician or service personnel if the grounding instructions are hot completely understood orif in doubt as to whether the tool is properly grounded 8 50 OSCILLATING SPINDLE SANDER receptacles that accept the tool s plug Repair or replace damaged or worn cord immediately Grounded cord connected tools intended for use ona supply cireuithaving a nominal rating less than 150V This tool is intended for use on a circuit that has an outlet that looks like the one INustrated in Sketch Ain Figure 1 The tool has a grounding plug that looks like the plug illustrated in Sketch A in Figure 1 A temporary adapter which looks Ilke the adapter illustrated in Sketches Band maybe used to connect this plug to a2 nole receptacle as shown in Sketch Bif a properly grounded outlet is not available The temporary adapter should he used only until a properly grounded outlet can be installed bya qualified electrician The green colored rigid ear lug anii the like extending from the adapter must be connectedto a permanent ground such as a properly grounded outlet hox Grounded cord connected tools Intended for use on a supply circuithaving a nominai rating between 150 250 inclusive This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch D in Figure 1 The tool has a grounding plug thatiooks
Download Pdf Manuals
Related Search