Home

MESA MFL2014ECSD Use and Care Manual

image

Contents

1. Replace the existing batteries with new ones See Changing Your Batteries pg 3 RA If the lock still does not open contact MESA SAFE Company Technical Support 800 490 5624 Monday thru Friday 7AM 4PM PST IMPORTANT DO NOT RETURN SAFE TO STORE If you are missing parts have difficulty programming the lock or opening your safe or any additional questions regarding the use and care of your safe DO NOT RETURN your safe to the store Please contact Mesa Sare Company Technical Support 800 490 5624 Monday thru Friday 7AM 4PM PST for assistance BASIC FEATURES amp FUNCTIONS gt 6 Personal Codes available Users Master User 1 User 2 User 3 User 4 amp User 5 4 NOTE Avoid confusion keep notes on which code belongs to which user gt The MESA MSL 500 Electronic Lock is shipped from the factory with a factory set Master Code ZA IMPORTANT Because the codes are factory set we highly recommened changing the codes to your own unique codes immediately gt If 4 incorrect codes are entered consistently the keypad will shut down for a period of 5 minutes During this shut down period the keypad will not accept any codes Programmable time delay function can be set from 01 minutes to 59 minutes gt Optional dual user mode in this mode two seperate codes will need to be entered to unlock the safe MSL 500 ELECTRONIC LOCK INSTRUCTIONS PG 4 SAFE OPERATION amp PROGRAMMING gt Your Master Code is fact
2. 1 4 To use this mode refer to How To Open Your Safe on pg 2 SETTING TIME DELAY 0 59 minute time delay input Input 1 5 9 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input 2 light stays green for 3 seconds 01 1 minute Time Delay 59 59 minute Time Delay 00 Will turn Time Delay mode off b Example 1 5 9 Master Code 3 This will set the Time Delay period to 3 minutes gt Unsuccessful Code Change 5 Beeps repeat steps 1 4 gt The Master Code will override the Time Delay HOW TO OPEN IN TIME DELAY MODE Enter any valid code other than the Master Code Once the code is entered the Time Delay will activate During the Time Delay codes will not be accepted When you press any PG 7 MSL 500 ELECTRONIC LOCK INSTRUCTIONS key the light will stay orange for 3 seconds The lock will Beep continuously amp the green light will flash for the last 30 seconds of the Time Delay period Once the continuous Beeps stop the lock will unlock for 5 seconds Turn the handle to open safe LOW BATTERY WARNING Time to change your battery When you enter your code a green light 8 a red light will turn on for approximately 5 seconds you will also hear 10 Beeps The safe will probably not unlock when you get this response When you enter your code a green light will turn on for approximately 1 second
3. 5 Beeps repeat steps 1 6 DELETE USER CODES Code length 3 8 digit code Input lock will Beep 2 times Input 6 6 6 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input User lock will Beep 2 times User Specify which user you would like to delete 1 2 3 or 4 Re Input User light stays green for 3 seconds gt Example 6 6 6 Master Code 1 1 New User Code New User Code This will delete User 1 gt Unsuccessful Code Change 5 Beeps repeat steps 1 5 MSL 500 ELECTRONIC LOCK INSTRUCTIONS PG 6 SETTING SINGLE USER amp DUAL USER MODE Single User Mode Only 1 code needed to open safe Input lock will Beep 2 times Input 1 5 8 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input 1 light stays green for 3 seconds b Example 1 5 8 Master Code 1 This will delete User 1 gt Unsuccessful Code Change 5 Beeps repeat steps 1 4 Dual User Mode 2 seperate codes needed to open safe Input lock will Beep 2 times Input 1 5 8 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input 2 light stays green for 3 seconds b Example 1 5 8 4 Master Code 2 gt Unsuccessful Code Change 5 Beeps repeat steps
4. SA SAFE COMPANY BETTER MESA SAFE THAN SORRY AAE MEE FAERIE GA SNOILINYLSNI 4201 2INO412313 005 1SW IVONVWNDNILVAJdO OPERATING MANUAL MSL 500 ELECTRONIC LOCK INSTRUCTIONS CATEGORY PAGE QUICK START 2 TROUBLE SHOOTING 3 BASIC FEATURES amp FUNCTIONS 3 SAFE OPERATION amp PROGRAMMING 4 HOW TO OPEN YOUR SAFE 4 CHANGING THE MASTER CODE 4 ACTIVATE USER CODES 5 CHANGE USER CODES 5 DELETE USER CODES 5 SETTING SINGLE USER amp DUAL USER MODE 6 SETTING TIME DELAY 6 HOW TO OPEN IN TIME DELAY MODE 6 LOW BATTERY WARNING 7 CHANGING YOUR BATTERIES 7 MSL 500 ELECTRONIC LOCK INSTRUCTIONS PG 2 DEAR VALUED CUSTOMER Congratulations on choosing your new Mesa Safe to secure and protect your valuables You have made an excellent choice in your security measures Mesa SAFE COMPANY has built a solid reputation on integrity and quality craftmanship We pride ourselves on delivering the best products in the industry and consistently exceed customer expectations Your Mesa Safe product comes with a Support Team and Warranty in place that is second to none We have the qualified Safe Technicians throughout the country ready to assist you should you have any issues regarding your unit Please visit us at MESASAFE com and scour our vastly diverse selection of products to meet your security needs Thank you for choosing MESA SAFE COMPANY fd Before using your unit thoroughly read and understand the Operating Instructio
5. ns of the unit This will ensure maximum efficiency and usability Green Light Red Light Orange Light Battery Compartment QUICK START Install the 9 V Battery that is included with your safe Enter 1 2 3 4 5 6 7 8 Turn handle before the green light turns off To lock your safe close door amp turn handle back to the locked position A IMPORTANT Always make sure your safe is locked before walking away gt If your code is correct a green light will turn on for approximately 5 seconds amp you will also hear a Click gt If the code is incorrect a red light will turn on following with 5 Beeps 4 NOTE Be sure to press firmly amp ONLY use your finger tips to press the keys on the keypad DO NOT USE your finger nail a pen etc This will damage the keys PG 3 MSL 500 ELECTRONIC LOCK INSTRUCTIONS TROUBLE SHOOTING The Lock Has No Response No Beeps gt Make sure the battery wires in the keypad housing are not pinched amp are securely connected Lock may possibly be in the Lockout Penalty mode Wait 5 minutes amp check if the lock responds See Wrong Try Penalty pg 3 gt Replace the existing batteries with new ones See Changing Your Batteries pg 3 The Lock Is Responding but Does Not Unlock gt Make sure you are getting a valid response Make sure you get a signal with every key stroke Make sure you are not in Time Delay mode See How To Open In Time Delay pg 3
6. ory set to 1 2 3 4 5 6 7 8 4 NOTE The Master Code should always be held by the owner of the safe You will not be able to activate delete users set up single dual entry and set up time delay without the Master Code HOW TO OPEN YOUR SAFE Single User Mode Default Setting Input Code light stays green for 5 seconds Turn the handle clockwise before the green light disappears b Example 1 2 3 4 5 6 7 8 gt Invalid Code Red light along with 5 Beeps Dual User Mode Please refer to Setting Single User amp Dual User Mode pg 4 Input 15 Code lock will Beep 2 times Input 274 Code light stays green for 5 seconds Turn the handle clockwise before the green light disappears b Example 1 Code 214 Code b Invalid Code Red light along with 5 Beeps Wrong Try Penalty If 4 wrong codes are entered the keypad will not accept any codes for 5 minutes If you press any key during this penalty the orange light will turn on for approximately 2 seconds and you will hear a Beep CHANGING THE MASTER CODE Code length 3 8 digit code 4 NOTE Always perform this operation with the door opened Test the new code several times before closing the door Input lock will Beep 2 times Input 8 8 8 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input New Master Code lock will Beep 2
7. s The safe will not unlock when you get this response gt If your keypad has no response no beeps no lights Battery Compartment Battery Connector CHANGING YOUR BATTERIES Locate the battery cover on the bottom edge of the keypad amp remove the cover by pulling on the tab Carefully amp gently remove the 9 V battery from the compartment ZA CAUTION Hold onto battery connector to avoid pulling wires out of housing Carefully re insert the new 9V battery do not force the battery into the compartment The lock will retain all current codes amp settings 2013 MESA SAFE COMPANY
8. times Re Input New Master Code light stays green for 3 seconds b Example 8 8 8 Master Code New Master Code New Master Code gt Unsuccessful Code Change 5 Beeps the old code is still valid repeat steps 1 5 PG 5 MSL 500 ELECTRONIC LOCK INSTRUCTIONS ACTIVATE USER CODES code length 3 8 digit code Input lock will Beep 2 times Input 3 3 3 lock will Beep 2 times Input Current Master Code lock will Beep 2 times Input User User Specify which user you would like to activate 1 2 3 or 4 Input New User Code lock will Beep 2 times Re Input New User Code light stays green for 3 seconds b Example 3 3 3 Master Code 4 New User Code New User Code tt gt Unsuccessful Code Activation 5 Beeps repeat steps 1 6 CHANGE USER CODES Code length 3 8 digit code Input lock will Beep 2 times Input 4 4 4 lock will Beep 2 times Input Current User Code lock will Beep 2 times input User User Enter the User that identifies the Current User Code on Step 3 Input New User Code lock will Beep 2 times Re Input New User Code light stays green for 3 seconds b Example 4 4 4 User 2 Code 2 New User Code New User Code t gt Unsuccessful Code Activation

Download Pdf Manuals

image

Related Search

Related Contents

SERVICE MANUAL MB23 and MB25 Moisture Analyzers  HP 10A  Wiley Maya Studio Projects: Game Environments and Props  Dans les pages qui suivent, vous trouverez la fiche  Olympus UIS2 User's Manual  120306 User Manual TVF81WMDCMBB CBC    User`s manual    Guide DEEE-RoHS  

Copyright © All rights reserved.
Failed to retrieve file