MESA MBF6032EPCSD Use and Care Manual
Contents
1. Input Your New Code lock will Beep 2 times Unsuccessful Code Change 5 Beeps the old code is still valid repeat steps 1 3 LOW BATTERY WARNING Red light appears when you open the safe along with the green light Enter your code amp get a valid response but the lock does not respond Battery Compartment Battery Connector 4 CHANGING YOUR BATTERIES O Locate the battery cover on the bottom edge of the keypad amp remove the cover by pulling on the tab Carefully 8 gently remove the 9 V battery from the compartment A CAUTION Hold onto battery connector to avoid pulling wires out of housing Carefully re insert the new 9V battery do not force the battery into the compartment O The lock will retain all current codes amp settings 2013 5 SAFE COMPANY MESASAFE COM 800 490 5624 337 W FREEDOM AVE ORANGE CA 928652. unlocked position before the green light disappears Wrong Try Penalty If 3 wrong codes are entered consecutively the keypad will shut down for a period of 15 minutes During this shut down period the keypad will not accept any codes CHANGING THE 1ST USER CODE code length 1 8 digit code 4 NOTE Test the new codes several times before closing the door O Located the red button on the inside hinge side edge of the door Press the red button Lock will Beep 2 times with the yellow light on input Your New Code lock will Beep 2 times Unsuccessful Code Change 5 Beeps the old code is still valid repeat steps 1 3 CHANGING THE 2ND USER CODE Code length 1 8 digit code 4 NOTE Test the new codes several times before closing the door O Located the red button on the inside hinge side edge of the door Input 0 0 on the keypad 8 press the red button Lock will Beep 2 times with the yellow light on Input Your New Code lock will Beep 2 times Unsuccessful Code Change 5 Beeps the old code is still valid repeat steps 1 3 PG 4 MSL 50 ELECTRONIC LOCK INSTRUCTIONS CHANGING THE EMERGENCY CODE Code length 8 digit code 4 NOTE Test the new codes several times before closing the door O Located the red button on the inside hinge side edge of the door Input 0 1 0 on the keypad 8 press the red button Lock will Beep 2 times with the yellow light on
3. S SAFE COMPANY BETTER MESA SAFE THAN SORRY NEN BCD SNOILDNYLSNIYDOTDINOYLD313 OS 1SW IVONVWDNILVdAdO 2013 OPERATING MANUAL MSL 50 ELECTRONIC LOCK INSTRUCTIONS CATEGORY PAGE QUICK START 2 SAFE OPERATION amp PROGRAMMING 3 HOW TO OPEN YOUR SAFE 3 OPENING YOUR SAFE WITH THE EMERGENCY CODE 3 CHANGING THE 15T USER CODE 3 CHANGING THE 210 USER CODE 3 CHANGING THE EMERGENCY CODE 4 LOW BATTERY WARNING 4 CHANGING YOUR BATTERIES 4 PG 2 MSL 50 ELECTRONIC LOCK INSTRUCTIONS DEAR VALUED CUSTOMER Congratulations on choosing your new Mesa Safe to secure and protect your valuables You have made an excellent choice in your security measures Mesa SAFE Company has built a solid reputation on integrity and quality craftmanship We pride ourselves on delivering the best products in the industry and consistently exceed customer expectations Before using your unit thoroughly read and understand the Operating Instructions of the unit This will ensure maximum efficiency and usability IMPORTANT DO NOT RETURN SAFE TO STORE If you are missing parts have difficulty programming the lock or opening your safe or any additional questions regarding the use and care of your safe DO NOT RETURN your safe to the store Please contact Mesa Sare Company Technical Support 800 490 5624 Monday thru Friday 7AM 4PM PST for assistance Green Light Red Light Orange Light Battery Co
4. mpartment QUICK START O Install the 9 V Battery that is included with your safe O Enter 1 2 3 4 5 6 7 8 Turn handle before the green light turns off O To lock your safe close door amp turn handle back to the locked position A IMPORTANT Always make sure your safe is locked before walking away If your code is correct a green light will turn on for approximately 5 seconds amp you will also hear a Click If the code is incorrect a red light will turn on following with 5 Beeps 4 NOTE Be sure to press firmly amp ONLY use your finger tips to press the keys on the keypad DO NOT USE your finger nail a pen etc This will damage the keys MSL 50 ELECTRONIC LOCK INSTRUCTIONS PG 3 SAFE OPERATION PROGRAMMING 1st USER CODE is factory set to 1 5 9 214 USER CODE is factory set to 1 6 8 EMERGENCY CODE is factory set to 1 2 3 4 5 6 7 8 A IMPORTANT Because the codes are factory set we highly recommened changing the codes to your own unique codes immediately HOW OPEN YOUR SAFE O Input Code light stays green for 5 seconds Turn the handle to the unlocked position before the green light disappears b Example 1 5 9 Invalid Code 5 Beeps OPENING YOUR SAFE WITH THE EMERGENCY CODE O Input Emergency Code wait 30 seconds the green light will appear amp stay on for 5 seconds Do NOT make any entries during the 30 second wait period Turn the handle to the
Download Pdf Manuals
Related Search