Historic Mantels BE10000 Installation Guide
Contents
1. a damp cloth as needed Do Not wet the mantel Water marks may appear if the cloth is wet HISTORIC MANTELS all rights reserved MAR 20132. Builder Series Installation Installation and cleaning Instructions Builder Series Mantel Historic Mantels Parts A 2 side legs B 1 top header Step 1 2 side legs Installation Angle Grinder Determine and mark the position of the leg height required Cut the bottom of the leg to the require height We recommend using a small angle grinder with concrete blade Mark sure the legs are level Use shims to level the mantel legs if required Drill a hole at the top of the mantel leg as marked with a concrete bit Hole may already be drilled Apply PL premium construction adhesive we recommend PL Premium to the back of the mantel legs Screw the legs into the wall Step 2 Install the mantel header Determine and mark the position of the mantel header as required Cut the header to the require length so it fits exactly between the two mantel legs Apply adhesive to the back surface of the mantel header and inside top of leg Use bracing to secure the mantel header tight to the wall until the adhesive sets Step 3 Finishing Fill any gaps around the mantel with the cement provided NOTE the cement provided dries in less then 20 minutes Add water and apply promptly mix only a small amount of cement as needed as it dries in 20 min tae the ee a ee Historic Mantels are factory treated with a clear water based sealer and do not require additional surface treatment m Step 4 Cleaning Clean mantel with
Download Pdf Manuals
Related Search