Home
NewAir AC-10100H Use and Care Manual
Contents
1. few hours to dry the inside of the unit Clean or change the filter Unplug and store the power cord as shown Place the unit back in its original carton and store it in a clean dry area 12 FAULT CHECK LIST The air conditioner does not run Is the air conditioner plugged in Is the power outlet functioning correctly ls the full water tank indicator light flashing ls the ambient room temperature lower than the set temperature The unit does not produce enough Is the unit placed in direct sunlight If so close cooling any curtains or move the unit to a more shaded area Are too many windows or doors open Are there too many people in the room Are there additional heat sources in the room The unit does not cool at all Is the fiter dusty or dirty Is the air inlet or air outlet blocked Is the ambient room temperature lower than the set temperature The unit is noisy UIs the machine positioned unevenly Make sure the air conditioner is positioned on an even solid surface The compressor does not work itis possible the overheat protection of the compressor is on If so wait for the temperature to drop and then turn on the unit again x NEVER TRY TO REPAIR OR DISMANTLE THE UNIT YOURSELF UNAUTHORIZED REPAIRS CAN VOID YOUR WARRANTY AND ENDANGER THE UNIT 18 TECHNICAL SPECIHCATIONS Model Number AC 10100E AC 10100H Power C
2. tube to the water outlet z a Water hole as shown Place the other end of drain S tube into a drain ubber plug rain kno 10 The drain tube may be extended by adding an extension tube with a suitable connector 5 d Drain tube Please Note 4 The drain must be at or below the level Original drain ofthe drainage port tube o 2 The full water tank indicator light will P not work when the unit is being X continuously drained 3 To extend the drain tube you can 00 07 connect it with another hose with an overall diameter of approximately 0 7 18mm n MAINTENANCE INSTRUCTIONS Always unplug the air conditioner from the power supply before cleaning To maximize the efficiency of the air conditioner regularly clean the unit Cleaning the Housi Use a soft damp cloth to wipe the body clean Never use aggressive chemicals gasoline detergents chemically treated cloths or other cleansing solutions These all could possibly damage the cabinet Cleaning the Filter Use a vacuum cleaner or tap the filter lightly to remove loose dust and dir from the filters Rinse thoroughly under running water no hotter than 104 F or 40 C Thoroughly dry the filter before replacing it back into the unit PLEASE NOTE NEVER USE THE UNIT WITHOUT THE AIR FILTER End of Season Storage Completely drain any condensed water from the unit Set the air conditioner on fan made ventilation only for a
3. ENCY Do not exceed the recommended room size Make sure doors and windows are closed while the portable air conditioner is in use Also keep curtains and blinds closed during the sunniest parts of the day while the air conditioner is in operation Frequently clean the portable air conditioner fiters Once the room or area has reached your desired comfort level be sure to reduce the temperature and ventilation settings PARIS Control panel Air outlet Carrying handle Caster Cord storage Air filter Air inlet Exhaust air outlet Air inlet 0 Rubber plug drainage point 11 Hose adaptor goes over the hose and into the window kit 42 Exhaust hose 43 Extendable window kit 44 Active carbon filter 5 Drain tube for continuous drainage 16 Remote control Bae INSTALLATION Extendable window kit 1 Open the window and insert the window kit into the open gap 2 Close the window until the window kit is held securely You may need to adjust the size of the window kit and secure it with screws This technique may also be used for sash windows 3 Fit the exhaust hose into the exhaust air outlet located on the back of the air conditioner 4 Attach one end of the hose adapter onto the exhaust hose 5 Attach the other end of the hose adapter to the window kit Mounting of the Exhaust Pipe Only use the hose provided and clip exhaust hose to the back of the air conditi
4. PLEASE READ AND SAVE THESE INSTRUCTIONS NewAir AC 10100E AC 10100H Portable Air Conditioner Owner s M anual BEFORE USE For safety reasons please read this manual carefully before operating We strongly recommend keeping this manual in a safe place for future reference dq di X GENERAL SAFETY A Donotuse a damaged power cord B Do not clamp or bend the power cord C Always operate the unit in an upright position and place it on a flat level surface at least 14 inches away from any other object D Do not place in front of an open window E Do not bring in contact with chemicals F Do not place near a heat source G Donotimmerse in water H Avoid areas where liquid can spill onto the unit Do not place objects on or in the unit and do not cover or obstruct the inlet or outlet grills 4 Do not use an extension cord K Keep out of the reach of children L Never try to repair or dismantle the unit yourself Unauthorized repairs can void your warranty and endanger the user ELECTRICAL SAFETY This appliance is for indoor use only Always turn off the unit and unplug it when not in use Do not use this unit in excessively humid or wet environments Do not pull or place strain on the power cord when moving the appliance IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED BY AN ELECTRICIAN OR SPECIALIZED TECHNICIAN AUTHORIZED BY THE MANUFACTURER IN ORDER TO PREVENT FIRE FOR MAXIMUM EFFIC
5. ction is not available while the machine is working in AUTO or FAN ventilation mode It will only work in cooling or heating mode Heating Func 1 n For AC 10100H Only When the air conditioner is in heating mode ambient warm air is recycled and used to heat your immediate area The exhaust pipe will still need to be fitted onto the unit in order for the cold air to be removed Continuous drain is compulsory while the unit is in heat mode Working range for heating function is 45 to 77 F 7 25 C If the ambient temperature is lower than this range the unit may not work properly All the functions can also be performed with the supplied remote control The remote control requires 2 AAA batteries to operate Regulating air flow direction Move the air vent directly to adjust the air flow direction of the louvers Please Note 1 To prolong the life of the compressor after turning off the unit please wait atleast 3 minutes before turning it back on The cooling system wil turn off if the ambient temperature is lower than the set temperature However the fan will continue operating at the set level Once the ambient temperature rises above the set temperature cooling will resume The heating system will turn off if the ambient temperature is higher than the set temperature The ventilation fan will continue operating at the set level Once the ambient temperature drops below the set temperature heati
6. ed manufacturer s warranty For one year from the original date of purchase the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship provided the appliance has been used under normal operating conditions as intended by the manufacturer Warranty Terms During the first year any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced at the manufacturer s discretion at no charge to the original purchaser The purchaser will be responsible for any removal or transportation costs Warranty Exclusions The warranty will not apply if damage is caused by any of the following Power failure Damage in transit or when moving the appliance Improper power supply such as low voltage defective household wiring or inadequate fuses Accident alteration misuse or abuse of the appliance such as using non approved accessories inadequate air circulation in the room or abnormal operating conditions extreme temperatures Use in commercial or industrial applications Fire water damage theft war riot hostility or acts of God such as hurricanes floods etc Use of force or damage caused by external influences Partially or completely dismantled appliances Obtaining Service When making a warranty claim please have the original bill of purchase with purchase date available Once confirmed that your appliance is eligible fo
7. er button 16 Sleep button 7 Full water tank indicator 37 Compressor indicator 8 Temperature increase button 18 Temperature decrease button 9 Display window 10 Remote control receiver Turning the Unit On and Oft 3 Press ON OFF button The unit will start automatically The default temperature is 75 F If the ambient temperature is Higher than 74 F 23 C the unit will work in cooling mode 1 Higher than 68 F 20 C but below or equal to 74 F 23 C the unit will work in Ventilation mode 1 Below 68 F 20 C the unit wil work in heating mode this is for cooling amp heating models only 2 Atthis time the indicator lights will show any functions that are in progress Please note that the display window will only show ambient room temperatures ranging from 32 F to 122 F 0 C to 50 C 3 To turn the unit off press ON OFF button again Setting the Model Function Press the MODE button to select the desired made cooling fan or heating Setting Temperature 1 2 Press Temperature up or Temperature down button to change the set temperature The display window will indicate the set temperature If not the temperature displayed will show the ambient room temperature Please note that the preset temperatures are as follows Cooling 75 F 24 C Heating 68 F 20 C Setting Fan Ventilation Speed 1 Press SPEED button to select the desired fan speed high or low The indicator light
8. ng will resume This machine is equipped with ANTI FROST function When using the heating function in low temperature the heater will occasionally stop heating in order to melt any frost that has accumulated within the air conditioner Normal operation will resume in a few moments DRAINING THE UNIT During the cooling process some water will be extracted from the air and stored within the units water reservoir If the reservoir is full both the compressor and motor will stop and the unit will beep press any button to stop the beeping sound The full water tank indicator light wil also start flashing To resume cooling empty the reservoir by following these steps 1 Tum ofthe air conditioner and unplug it from the wall socket To prevent water leakage avoid moving the unit when fl 2 Place a container such as a small pan underneath the dain hole 8 Remove the drain knob amp rubber plug from the drain hole and allow the water to drain ou 4 When the container is almost ful replace the rubber plug in the drain hole and empty the water ray Waterhole 9 5 Repeat until the unit is emptied Rubber plug Drain knob 6 Replace the rubber plug and make sure itis firmly in place 7 Turn the unit back on The full tank indicator light should turn off For Continuous Drainage Remove the drain knob and ubber plug from the drainage port and hold on to them for future use Ys ect Connect the drain
9. oner Avoid kinks and bends in the exhaust hose This can cause moist air to accumulate causing the unit to overheat and shut down extended from 12 inches 300mm to 59 inches 1500mm but for maximum cooling efficiency use the shortest length possible The exhaust hose may be WARNIN The included exhaust hose is specifically designed to fit the specifications of this unit Do not extend it with your own hose as this can cause the air conditioner to malfunction Installation of the Carbon Filter Remove the filter frame from the unit Separate the filter fixer from the filter frame Remove the activated carbon filter from its plastic bag Attach the activated carbon filter to the filter frame Reattach the filter fixer onto the filter frame the activated carbon filter should be placed between the filter frame and filter fixer firmly Insert the filter set filter frame activated carbon filter filter fixer into the back of the unit FIGS OPERATION Control panel x RR 885 0 BA O e QB KOL e QS Oe Qo 602 jj 1 Automatic mode indicator 1i ON OFF power button 2 Cooling mode indicator 32 High fan speed indicator 3 Fan ventilation mode indicator 18 Low fan speed indicator 4 Mode selection button 14 Fan speed ventilation button 5 Timer operation indicator 15 Sleep mode indicator 6 Tim
10. onsumption see 909W 83A 909W 83A Power Consumption jh NA 809W 8 3A Air Volume Max Speed 2180FM 355m h Dehumiditication Stipa capacity Pints hour Power Supply 115V 60Hz Compressor Type Rotary Refrigerant R 410A Please refer to the rating label Fan Speeds 2 Timer 4 12 hours Exhaust Pipe 5 x 59 06 127 x 1500mm Net Weight 485 lbs 22 kg Dimensions W x D x H 42 1 x 15 7 x 20 7 305 x 383 x 752 mm Notes 1 The heating function is only available in the AC 10100H model 2 The data marked with may vary for technical reasons for more accurate data please refer to the rating label found on the back of the unit 3 Measuring condition for the above specifications Cooling DB 95 F 35 C WB 82 94 F 28 3 C Heating DB 68 F 20 C WB 59 F 15 C D B dry bulb temperature room temperature W B wel bulb temperature relative humidity Reset Button f yu pug in the lr Conditioner and there no green lighe on the pug Test Button press the reset button on the LCDI plug The graen light should be ir indicating that the air conditioner getting power from the electrical outlet PRS W the plug continues to trip which iss USA national safety standardi feature and the green light goes off e cord ray be damaged preveneng you from resetting the unit For your ey conac a licensed electrica 14 LIMITED MANUFACTURER S WARRANTY This appliance is covered by a limit
11. r warranty service all repairs will be performed by a NewAir authorized repair facility The purchaser will be responsible for any removal or transportation costs Replacement parts and or units will be new re manufactured or refurbished and is subject to the manufacturer s discretion For technical support and warranty service please call 1 855 9Newair or email support newair com
12. will display the fan speed selected If the unit is in AUTO mode it will choose the ventilation speed automatically according to the ambient temperature the related indicators wil light on In the AUTO made the fan speed cannot be changed manually Setting Timer 1 Press TIMER button to set the desired number of operating hours from 1 to 12 hours When the set time has been reached the machine will turn off automatically The display window will show the hour s you set as you press TIMER button If te TIMER is not set the unit wil work continuously By pressing the timer without turning on the ather functions you can PRE SET the number of hours to be delayed before the unit turns on For example if you set the timer to 2 the unit will automatically turn on after 2 hours Sleep Function 1 When in cooling mode press the SLEEP button The set temperature will increase Z F 1 C on the tst hour another 2 F 1 C on the second hour and then maintain that temperature When in heating mode press the SLEEP button The set temperature will decrease ZF 1 C on the 1st hour another 2 F 1 C on the second hour and then maintain that temperature In sleep mode the fan will automatically be set to low By pressing the SLEEP button again the set temperature and fan speed will revert back to the previous setting The unit wil shut down automatically after it has been in sleep mode for 12 hours Please note the sleep fun
Download Pdf Manuals
Related Search
Related Contents
Samsung 204T User Manual MODE D`EMPLOI Equip HDMI Cable/-Adaptercable pc-1041 yp-01141204 manual 取扱説明書【インストールガイド】 051232_CarDuction 33 Manual_IT Fazer de PDF TE 3000-AVR User Manual - ATP Instrumentation Motocaddy S-Series Instruction Manual Copyright © All rights reserved.
Failed to retrieve file