Luma Comfort EC110S Use and Care Manual
Contents
1. absolutely necessary do not use more than one extension cord to operate more than one cooler Do not insert objects or allow fingers to enter into the cooler s grills as this may cause electric shock or bodily injury Do not block or tamper with the evaporative cooler while it is in operation Do not run the power cord under mats or carpeting and do not cover the power cord with runners Arrange the power cord away from room traffic and where it can be tripped over Do not operate this evaporative cooler in the presence of flammable substances or explosives Do not place the cooler near an open flame or cooking heating appliances If the evaporative cooler will not be in use empty the tank of any remaining water If the cooler s plug or power cord is damaged do not attempt to repair the components yourself Please contact Luma Comfort s customer service hotline at 1 866 737 6390 or have the unit examined by an authorized service provider SAVE THESE INSTRUCTIONS Parts List IES CLT Lier Fan head Display panel Water level indicator Caster Control panel Remote control storage slot Carrying handles Cooling pad knob ONOAPWNa Cooling pad slot Dustproof air filter Water tank Power cord bracket Power cord Water tank knob Ice pack Remote control Operating Instructions Carefully remove all packaging materials and retain for future storage use Make sure there2. is no residual foam left in any of the components No tools will be required to assemble this evaporative cooler Filling the Water Tank a Remove the water tank by turning the water tank knob counterclockwise 90 b Before using the evaporative cooler for the first time we recommend cleaning the tank with a warm water and light detergent solution c Fill the tank with clean water Pay attention to the water level indicator located on the front of the cooler to avoid overfilling the evaporative cooler The approximate tank size of the EC110S is 1 5 gallons 5 5 liters d Replace the tank back onto the back of the unit Turn the water tank knob clockwise 90 This locks the water tank back into place i a me roti me he wi an rtm Using the Ice Pack a The EC110S evaporative cooler includes an optional ice pack for added cooling b Place the ice pack in the freezer until frozen Do not open the ice pack or ingest its contents c Put the ice pack into one of the water tank s chambers d The ice pack is not necessary for operation but will help enhance the cooling effect in higher temperatures e The ice pack will last approximately 4 hours before melting Using the Remote Control a o sa o0a0 The EC110S is equipped with a remote control A CR2032 3V coin type replacement battery is included for your convenience To use the remote control aim it at the unit and select one of the
3. IU MaQeee comfort Owner s Manual EC110S Portable Evaporative Cooler IMPORTANT SAFETY INFORMATION Please carefully read this manual before attempting to install or use this evaporative cooler For your safety comply with all safety instructions and warnings contained in this owner s manual to prevent personal injury or property damage To view the full line of Luma Comfort products please visit www lumacomfort com Contents WAU WON eerste see ce ndey ea ate noes ete a aN e lt ateeneesoceeceneatesseoescedeceaterciece 1 Prod ct SSIS cis oa ek eas sed eg eel een ered eee EE KEKEKE ees 1 Important Safety Information sac cses ics teh issatatectsnece dels adesadeleodetie deuaidayedeeaded ee ctatnedeadelecioadconas 1 Parts ISt ected igs tl cde in AE AEAEE NA artiste stem 2 Operating Instructions xs se52 ose cenioratdassdaacjannesanenedagegashnonbbapidenadanadanioepedaaigeapaadebandedhagntadice 3 Filling the Water Tank ch ican exasdeichacneti Socmaet cdetnatid aenmckndaaneselsd enmanedeenatadaumeabedannmennes 3 Using the lce PACK wicscccsctciniceciatsdthastinidecinindtiaddiniatninlaitinttaddsnidiclbinidisedtaddinotbcolindciecs 3 Using the Remote Control cccccccccccccceeececenecceeeeeeeeeeeecaaeeeeeeeeeeeeeeseaaaeeeeeeeeeeenenea 4 The Control amp Display Panels eccses ccctsrsccntecpteapttantpar Menten ddanican chants cuckanenceiiepinauelenenene 5 IVE Essien nndis tanina e ee a a ei e a eia aea iai 6 General Maintenance lInstruct
4. clone for a more focused cooling effect Additional Features a lf the water level in the tank drops below the minimum level the unit will produce an audible alert that will last for 10 seconds After 10 seconds the evaporative cooler will automatically turn off b If the water tank is removed while the unit is on it will automatically turn off Maintenance Regular cleaning and maintenance is an essential step in maintaining the longevity of your evaporative cooler and ensuring that it operates free of defects Maintain your evaporative cooler by following these steps General Maintenance Instructions e Always unplug the evaporative cooler from the power supply before servicing or cleaning e Useasoft cloth and a mild soap and warm water solution to clean the unit s exterior Do not use harsh cleaners gasoline paint thinner benzene etc as these substances can damage the evaporative cooler e Thoroughly dry all of the cooler s parts with a soft cloth before reconnecting the unit to the power supply e Empty the water tank after the evaporative cooler has been in use Regular scheduled cleaning of the water tank before each use is also recommended e If the evaporative cooler will not be in use for an extended period of time place the unit back in its original carton and keep it stored in a clean dry place e The evaporative cooler s filter tank and cooling pad will need to be removed prior to cleaning Once all of the diff
5. erent components have been cleaned place them back into the unit in this order water tank cooling pad and dust filter Cleaning the Dust Filter amp Cooling Pad e To prevent clogging of the dust filter we recommend cleaning the filter at least once a month e Toclean the dust filter remove it from the back of the unit by pushing down on the two tabs located above the filter and pull it out Gently scrub it with a soft brush and rinse with water Allow it to thoroughly air dry before placing it back in the unit e Toclean the cooling pad first remove the dust filter to expose the pad Turn the knob on the pad clockwise and pull it out from the back of the unit Rinse it with clean water and allow it to thoroughly air dry before placing it back in the unit i i Dust filter Cooling pad Cleaning the Water Tank Unplug the evaporative cooler from the power supply and empty the water tank after the evaporative cooler has been in use Regular scheduled cleaning of the water tank before each use is also recommended To clean the water tank rinse it in a warm water and light detergent solution or a water and vinegar solution Rinse it with clean water and dry it thoroughly before placing it back into the cooler Troubleshooting Problem Possible Cause s Possible Solution There is no airflow The unit is not plugged in The water tank is not locked into the unit Check to make sure the plug i
6. fort products are warranted to be free from defects in workmanship or materials for one 1 year from the date of purchase If the product is found to be defective within this period Luma Comfort at its sole option will repair or replace any components that fail during normal operation The repairs or replacement will be made at no charge to the customer for parts and labor assuming that the customer shall be responsible for all transportation costs to and from Luma Comfort Luma Comfort retains the right to repair or replace with a new or newly refurbished replacement product the appliance at its sole discretion This warranty does NOT apply to the following Products without a proof of purchase Products purchased from a source other than an authorized Luma Comfort dealer Cosmetic damage such as scratches or dents Damage caused by service performed by anyone who is not an authorized service provider of Luma Comfort Damage in transit e Damage caused by accident abuse misuse water flood fire improper installation maintenance negligence commercial use for a non commercial unit acts of God or any other acts of nature or external causes e Damage to a product caused by modifications or alterations without the written permission of Luma Comfort e Normal wear and tear of parts that are designed to be replaced such as filters or batteries e Power failure and improper power supply such as low voltage defective wiring or inadequate fu
7. functions on the remote control The effective distance is approximately 24 ON SPEED Power ON and adjusts speed OFF Power OFF TIMER Timer function of up to 7 5 hours SWING Swinging air louvers COOLER HUMIDIFIER Controls cooling humidification function MODE Adjusts the airflow mode COOLER HUMIDIFIER lumase e E The Control amp Display Panels ON COOLER SPEED HUMIDIFIER MODE TIMER SWING OFF ON SPEED amp OFF Buttons a After the tank is filled with water connect the evaporative cooler to a power outlet The unit will beep twice indicating that the power source is connected The cooler will be in standby mode at this time Press the ON SPEED button to turn on the evaporative cooler To adjust the fan speed press the ON SPEED button again until your desired speed has been reached The current fan speed will be indicated on the display panel To turn the unit off and revert back to standby mode press the OFF button COOL HUMIDIFIER Button a After the desired fan speed has been selected press the COOLER HUMIDIFIER button to activate the cooling humidifying function This powers the water pump and will cool and add moisture to the air at the same time The blue cooling icon will also be visible on the display panel b Please note that if the initial fan speed is set to 3 the unit will revert back to the second speed setting for 5 minutes After 5 minutes the unit will automatically switc
8. h to the third fan speed This is to allow the cooling pad to be thoroughly absorbed with water which results in optimized cooling The cooler will not revert back to other speeds if the initial fan speed was set to either 1 MODE Button a The EC110S has 2 different automatic airflow modes Setting the airflow mode is optional b ue set the airflow mode press the MODE button Natural Mode Indicated by the palm tree icon on the display panel this setting will adjust the airflow speed between 1 2 and 3 Sleep Mode Indicated by the moon icon on the display panel this setting will gradually lower the speed at different intervals depending on the selected fan speed If the fan speed is set to 3 the cooler will run for 30 minutes on high speed 30 minutes on medium speed and then continue to operate on low speed If the fan speed is set to 2 the cooler will run for 30 minutes on medium speed and then continue to operate on low speed If the fan speed is set to 1 the cooler will continuously run on low speed TIMER Button a This evaporative cooler is equipped with a 7 5 hour programmable timer To set the timer press the TIMER button Each press of this button will add 0 5 hours to the set time b The set time will be indicated in the middle of the display panel SWING Button To activate the oscillation feature press the SWING button The fan head will automatically oscillate counterclockwise which directs cool air into a cy
9. ions esseeesenneeeeeeeeeennenrrreeseerenrrnnrrreseerrrnrnnnneeneee 6 Cleaning the Dust Filter amp Cooling Pad ccccccccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 6 Cleaning the Water Tank scccicncutesacucetcnntuintnestneneneadnintvsntnsuencuduasdweniednenenducudnenduendndenes 7 MrouDleSNOOtN Geirr a ener erat pty Ea ee reentry 8 Technical Support 3isc sires dnseeccateoeeseetasienostcperevadnniewostapeeecucesienidnseecvabeneeeretejepeostspieeoigedigede 9 Product Specifications ic seas cat boncmeucdaunedend auger deunaseasaemeueneutectnacutuaaaauamtcoemeuuageneatie 9 Waranty ascinsioni eiae E aE EEE E EA E iiS 10 Introduction Thank you for purchasing this evaporative cooler from Luma Comfort the world leader in home appliances and home comfort products This owner s manual provides specific operating instructions for your evaporative cooler Use the evaporative cooler only as instructed in this owner s manual Product Benefits Designed for cooling small to medium size bedrooms living rooms sunrooms patios and offices Sleek modern design makes it an attractive addition to your home High efficiency rigid cooling pad holds more water Removable water tank makes refilling and emptying easy Powerful motor results in more powerful airflow faster evaporation and cooler air Consumes about as much electricity as your typical 100 watt light bulb Eco friendly evaporative cooling system cools the air by the natural
10. nd vinegar solution and pour it in the tank Turn the cooler on and let the solution run through the pads to break up any buildup that may be clogging the cooling pad Contact customer service if there is an issue with the water tank There is an odor coming out of the evaporative cooler The unit is brand new and has never been used before There is algae buildup in the tank or on the cooling pad If the evaporative cooler has never been used before the unit may emit a slight odor upon initial use This odor will dissipate within a week If the evaporative cooler is not new there may be algae buildup in the tank or on the cooling pad Clean the tank out with a vinegar water solution and or call customer service for a new replacement pad Technical Support Luma Comfort is committed to providing a premier service experience If you are experiencing any technical issues with your product related to either setup or operation please contact our product support team at 1 866 737 6390 or support lumacomfort com Product Specifications Model EC110S Product Dimensions 12 75 x 11 25 x 34 5 Product Weight 16 2 pounds Voltage 110V 120V Wattage 110W Coverage Area Up to 250 square feet Tank Size 1 76 gallons Fan Speeds 3 Noise Level dB 66 Airflow 500 CFM Oscillation Yes Warranty 1 year manufacturer s warranty Warranty Luma Com
11. process of evaporating water with no Freon or harmful chemicals Adds moisture to dry environments and eliminates airborne dust particles Covers up to 250 square feet Important Safety Information These instructions are not meant to cover every possible condition and situation that may occur Please read all instructions before using this evaporative cooler Failure to carefully read all instructions may result in possible electric shock or fire hazard and will void the manufacturer s warranty 1 2 3 4 OO Use this evaporative cooler only as instructed in this owner s manual Other uses may cause electric shock injury or fire Close supervision is required if this cooler is used near children or pets To protect against electric shock do not immerse this cooler or its plug and cord in water If the cooler is being transported or will not be in use disconnect it from the power supply by tightly gripping the plug and pulling it from the power outlet Do not disconnect the power supply by pulling on the evaporative cooler s power cord Avoid contact with any of the evaporative cooler s moving parts Place the evaporative cooler on a level surface This evaporative cooler is intended to fit into a matching receptacle Under no circumstances should the plug be altered in any way An improper connection can result in electric shock If possible avoid using extension cords with this evaporative cooler If an extension cord is
12. s plugged into an outlet The unit should beep twice once the power supply is connected Make sure the water tank is locked into the back of the unit The unit does not cool There is insufficient water in the tank The cooler humidifier button was not pressed The pump is defective Check the water level in the tank and make sure there is enough water Press the COOLER HUMIDIFIER button Contact customer service if there is an issue with the water pump The unit does not cool on high speed The cooling pad is not sufficiently saturated with water If speed 3 is selected when in cooling mode the unit will automatically revert to speed 2 for 5 minutes to allow the pad to be fully soaked The cooler will automatically turn to speed 3 when the pad is soaked Water is coming out of the vents The cooling pad may be clogged with debris Clean the cooling pad by rinsing it in water and allowing it to thoroughly dry You can also clean it with a water and vinegar solution If the problem persists contact customer service The full tank indicator turns on when there is still enough water in the tank There is an issue with the water pump s sensor Clean the water pump by wiping it down with a damp cloth or try rinsing it with a water and vinegar solution The water tank is leaking There is mineral buildup on the cooling pads The water tank is damaged Mix together a water a
13. ses e Use of force or damage caused by external influences e Complete or partially dismantled appliances THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS IMPLIED OR STATUTORY INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE STATUTORY OR OTHERWISE THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS WHICH MAY VARY FROM STATE TO STATE IN NO EVENT SHALL LUMA COMFORT BE LIABLE FOR ANY INCIDENTAL SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER RESULTING FROM THE USE MISUSE OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU If you believe your product is defective contact Luma Comfort for warranty service at 1 866 737 6390 or support lumacomfort com In your correspondence with Luma Comfort please describe the problem and request a return material authorization RMA number You will also need to provide the proof of purchase return shipping address and a daytime phone number After a Luma Comfort representative confirms that your product is defective and is still under warranty you will receive an RMA and return shipping instructions Products sent to our headquarters without an RMA will be refused 10
Download Pdf Manuals
Related Search