Honeywell HZ-860 Use and Care Manual
Contents
1. AWARNING IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS OR PRODUCT LABELS PLEASE CALL OUR CUSTOMER REPRESENTATIVES AT 800 477 0457 FOR ASSISTANCE BEFORE USING THIS PRODUCT Warning Failure to follow any of these safety instructions could result in fire injury or death YOUR RESPONSIBILITIES Electrical appliances may expose people to hazards that can cause severe injury as well as death The use of electrical products may create hazards that include but are not limited to injury fire electrical shock and electrical system damage These instructions are intended to provide you with the information you need to use the product and to avoid such hazards When using electrical appliances basic precautions should always be followed to reduce risk of fire electric shock and injury to persons including the following Honeywell THERMAWAVE CERAMIC HEATER Model HZ 850 Series Model HZ 860 Series Warning Read all instructions before using this heater Warning This heater is hot when in use To avoid burns do not let bare skin touch hot surfaces If provided use handles when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 feet 0 9 m from the front of the heater and keep them away from the side2. This type of heating technology provides fast even heating The ThermaWave Ceramic Heater has an organic industrial design that maximizes heat output It is designed with fan power to improve convection in order to provide both all around or directional heating comfort to you and your room ASSEMBLY This heater requires simple no tool assembly Unpack Main Body and Mounting Base Fig 1 Place Mounting Base on a firm surface upright in any direction Place ThermaWave Main Body on Mounting Base so Mounting Tabs are aligned with Base Slots Press Main Body onto the Base until Tabs snaps secure into the Slots Fig 2 SET UP Place the heater on a firm level open surface free from obstructions and at least 3 feet 0 9m away from any wall or combustible material DO NOT use on an unstable surface such as bedding or deep carpeting BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS For best result place heater on the floor to create warming room convection and allow heater to run for 5 10 minutes to reach maximum heat output MOVING THE HEATER Turn off the heater Allow it to cool for ten 10 minutes Unplug heater and move This heater is equipped with a Cool Touch Handle for your convenience ie OPERATION NOTE NEVER LEAVE AN OPERATING UNIT UNATTENDED With the Power Knob or Power Button in the OFF O or l position plug the heater into a polarized 120V outlet DO NO
3. automatically turn the heater back on and then off as needed to maintain the selected temperature Turn the Power Knob to OFF O and unplug the heater when you are finished using it OPERATION CONTINUED Model HZ 860 Series EnergySmart ThermaWave Ceramic Heater Operation Turn heater on by pressing ON button Model H2 860 The heater will default to the Constant HI i mode and the Current Temp Indicator will energy Smar Current display the current room temperature Energy Usage Temp Indicator Indicator The Energy Usage Indicator will display the power consumption used by the heater EnergySmart The Energy Usage Indicator will display Mode STAND BY when the heater has reached the Desired Room Temperature At this point the heater is most efficient and is drawing only a few watts of energy while in STAND BY mode Power f Se Continuous Light Heat Mode Energy Usage Indicator Status e f HI the heater is drawing 1500 watts to quickly warm the room e f LO the heater is drawing 750 watts to slowly warm the room or maintain the temperature e In STAND BY the heater is drawing no power as the room has reached Power Button the Desired Temperature Model HZ 860C Canada To set the heater the digital control Po is equipped with two 2 modes Ses Current Energy Usage FERN Temp Constant Heat Mode _ Indicator _ Indicator there are two 2 heat settings f 1 For Constant Low
4. press LO this w ps setting uses 750 watts of power oe ee 2 For Constant High press HI this Mode setting uses 1500 watts of power NOTE Because the Low LO setting does J n not require as much electricity to operate Power eee Continuous it is more energy efficient and may be a Light f Heat Mode better option if you are concerned about the amperage draw on a circuit when the heater is on the High HI setting Power Button OPERATION CONTINUED EnergySmart Mode A smart thermostat that helps you save energy Press SET to choose four 4 comfort settings of 65 18 70 21 75 23 80 26 This is your desired room temperature The EnergySmart thermostat will automatically select the appropriate power level to best accommodate your Desired Temperature As the air temperature Current Temp in the room approaches the Desired Temperature the heater will automatically lower the power consumption to provide consistent warmth without wasting energy The Current Temp Indicator will display the current room temperature To override the EnergySmart function simply press SET to choose either OFF 1 LOW or HIGH Continuous Heat SAFETY FEATURES This heater is equipped with several devices and features for added protection e A tip over switch that disables the heater if it is accidentally tipped e Model HZ 850 Series 2 way shut off disabled heater if tipped front or back directio
5. T FORCE THE POLARIZED PLUG INTO THE OUTLET it will only fit one way The ThermaWave Ceramic Heater is versatile and designed to be placed in the center of the room or closer to the wall at least 3 feet away for maximum convection room heating Model HZ 850 Series ThermaWave Ceramic Heater Operation The Power Knob is equipped with two 2 settings Model HZ 850 1 Low this setting uses 750 watts of power 2 High W this setting uses 1500 watts of power Power Knob NOTE Because the Low setting does not require as much electricity to operate it is more energy efficient and may be a better option if you are concerned about saving energy Power Light Turn heater on by turning the Power Knob to either Low 2 or High R the amber Power Light will come on Thermostat Because the Low setting does not require as much Control electricity to operate it is more energy efficient and may be a better option if you are concerned about the amperage draw on a circuit when the heater is on the High tt setting To set the Thermostat turn the Thermostat Control fully clockwise to the highest C setting When the room reaches a comfortable temperature slowly turn the Thermostat Control counter clockwise until both the heating element and fan go off the amber Power Light will remain on This is the point at which the Thermostat setting equals the room temperature At this setting the Thermostat will
6. T THIS SAFETY FEATURE 11 Warning This heater draws 12 5 amps during operation To prevent overloading a circuit do not plug the heater into a circuit that already has other appliances working 12 Warning It is normal for the plug to feel warm to the touch however a loose fit between the AC outlet receptacle and plug may cause overheating and distortion of the plug contact a qualified electrician to replace loose or worn outlet 13 Warning To disconnect the heater first turn off the product then grip the plug body and pull it from the wall outlet Never pull by the cord 14 Warning Do not insert or allow foreign objects to enter any ventilation or exhaust Opening as this may cause an electric shock or fire or damage the heater 15 Warning To prevent a possible fire do not block air intakes or exhaust in any manner Do not use on soft surfaces like a bed or where openings may become blocked 16 Warning A heater has hot and arcing or sparking parts inside Do not use it in areas where gasoline paint or flammable liquids are used or stored 17 Warning Use this heater only as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons 18 Warning Always plug heater directly into a wall outlet receptacle Never use with an extension cord or relocatable power tap outlet power strip 19 Warning Never tamper
7. THE HEATER TO THE ORIGINAL PLACE OF PURCHASE DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY N 3 YEAR LIMITED WARRANTY You should first read all instructions before C This warranty does not cover damage resulting attempting to use this product from any unauthorized attempts to repair A This 3 year limited warranty applies to repair or OF om any Use Pot IN acercan Neale replacement of product found to be defective in material or workmanship This warranty does not apply to damage resulting from commercial abusive unreasonable use or supplemental damage Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty KAZ USA INC IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you also may have other rights which vary from jurisdiction to jurisdiction This warranty applies only to the original purchaser of this product from the original date of purchase At it
8. dims HZ 850 HZ 860 Series 17 3 L x 8 5 W x 18 H assembled Amps 12 5 Unit Voltage 120V 60Hz Max Watts 1500 Max BTUs 5118 Operation Cost To estimate the cost to operate this heater multiply the watts used times 001 to convert into a kilowatts measure and multiple by your local kilowatt electric rate for however long you run the heater For example if your electric rate is 1196 per kilowatt hour and you ran this heater in constant high mode 1500 watts for 4 hours it would cost you 71 cents to run the heater 1500 watts x 4 hours x 001 x 1196kwp 71 cents NOTE Because the Low LO or EnergySmart HZ 860 Series settings do not require as much electricity to operate they are more energy efficient and may be better options if you are concerned about the amperage draw on a circuit when the heater is on the High HI setting Calculation Total Wattage x 001 x Cost per Kilowatt Hour Cost to operate Average Retail Price of Electricity to Ultimate Customer by End Use US Energy Information Administration August 11 2010 CONSUMER RELATIONS Mail questions or comments to Call us toll free at 1 800 477 0457 Kaz USA Inc E mail consumerrelations kaz com Pa SUE ea OUD Or visit our website at www kaz com 250 Turnpike Road i a Southborough MA 01772 Please be sure to specify a model number NOTE IF YOU EXPERIENCE A PROBLEM PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY DO NOT RETURN
9. ns e Model HZ 860 Series 4 way shut off disables heater if tipped front back or side to side directions e A high temperature safety control prevents overheating e Equipped with a thermal cut off fuse that will permanently shut down the heater should it operate at a higher than normal temperature e This heater was created using a high quality safety plastic CLEANING AND STORAGE We recommend that this heater be cleaned at least once a month and before off season storage e Turn the heater OFF O or 4 and unplug it Allow it to cool e Use a dry cloth only to clean the external surfaces of the heater DO NOT USE WATER WAXES POLISHES OR ANY CHEMICAL SOLUTIONS e Before storing clean the ThermaWave Heater using the above mentioned steps Wrap the cord around the unit Place in its original box and store it in a cool dry place e This heater does not disassemble O TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate one of your heater safety features may have been activated to prevent overheating e Be sure it is plugged in and that the electrical outlet is working e Check for any obstructions If you find an obstruction turn the heater OFF O or 4 and unplug it Allow the heater to cool completely then remove the obstruction Wait at least 10 minutes then plug the heater in and follow the OPERATION instructions PRODUCT SPECIFICATIONS Model s HZ 850 Series HZ 860 Series Unit
10. s and rear Warning Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended Warning Always unplug heater when not in use Warning Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Discard heater or return heater to manufacturer Warning For residential use only Warning Do not use outdoors Warning This heater is not intended for use in bathrooms laundry areas and similar indoor locations Never locate heater where it may fall into a bathtub or other water container Warning Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Arrange cord away from traffic area and where it will not be tripped over The Honeywell trademark is used by Kaz USA Inc under license from Honeywell International Inc Honeywell International Inc makes no representation or warranties with respect to this product 10 CAUTION THIS APPLIANCE HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER TO REDUCE THE RISK OF SHOCK THIS PLUG IS INTENDED TO FIT ONLY ONE WAY IN A POLARIZED OUTLET IF THE PLUG DOES NOT FIT SECURELY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN DO NOT ATTEMPT TO DEFEA
11. s option Kaz USA Inc will repair or replace this product if it is found to be defective in material or workmanship instruction manual D Return defective product to Kaz USA Inc with a brief description of the problem Include proof of purchase and a 10 US 15 50 CAN check or money order for handling return packing and shipping charges Please include your name address and a daytime phone number You must prepay shipping charges We suggest having tracking or delivery confirmation Send to In U S Kaz USA Inc Attn Returns Department 4755 Southpoint Drive Memphis TN 38118 USA In Canada Kaz Canada Inc Attn Returns Department 510 Bronte Street South Milton ON LOT 2X6 Canada Please go to www kaz com and register your product under the Customer Care Center and receive product information updates and new promotional offers
12. with this product or attempt to fix it Any tampering with or modification of this product can result in serious injury death or fire Risk of electric shock Do not open No user serviceable parts inside 20 Warning Do not remove product labels that contain warnings or safety instruction 21 Caution The output of this heater may vary and its temperature may become intense enough to burn exposed skin Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns 22 Caution Before cleaning or storage or when not in use turn the product s controls to the OFF position and unplug the heater from the electrical outlet and allow to cool 23 Caution Place the heater on a firm level open surface free from obstructions and at least 3 feet 0 9 m away from any combustible materials DO NOT use on an unstable surface such as bedding or deep carpeting Be sure the heater is not in a position where it may be tripped over by small children or pets The heater s rubber feet will hold it firmly in position 24 Caution If your home has aluminum wiring have a licensed electrician check your receptacle s connections When using a 1500 watt heater aluminum wire connections can cause a safety issue 5 SAVE THESE INSTRUCTIONS ABOUT CERAMIC TECHNOLOGY Ceramic heaters generate heat by passing electricity through heating wires embedded in ceramic plates
Download Pdf Manuals
Related Search