DMI 539-1902-0099 Instructions / Assembly
Contents
1. gt C Footrest Base rubber latex h natural rubbe Meilghe Capacity 230D gt D Leg Assembly Screw 1 7 8 4 which may cause gt E Washers 8 allergic reactions gt F Handrail gt G Handrail Screw 2 1 4 4 Manufactured for Briggs Medical Service Company 1931 Norman Drive South Waukegan IL 60085 USA E If any parts are missing do not return to the place of purchase 2010 Briggs Medical Service Company Contact us at 800 622 4714 Safety Security Durability2. Daily Essentials DMI Foot Stoo WITH HANDRAIL Model 539 1902 0099 Assembly Instructions gt 1 In the upright position crisscross the leg assemblies so the center flattened areas are flush The legs labeled 1 and 3 should be on top Be sure the legs numbered 3 and 4 are on the same side Insert the 7 8 Base Screw A through both leg assemblies and secure with a Nut B as shown in Fig 1 Using a Philips head screwdriver tighten the screw DO NOT OVER TIGHTEN AS IT COULD STRIP THE THREADS gt 2 Place the Footrest Base C upside down on a flat surface with the screw holes facing up With the leg assembly upside down align the holes in the legs with the threaded sockets in the footrest next to the corresponding numbers as shown in FIG 2 Insert the 1 7 8 Leg Assembly Screw D through a Washer E and into each of the leg assemblies Using a Philips head screwdriver loosely tighten each of the screws p gt 3 Attach the Handrail F by aligning the four holes in the handrail with the four holes on legs 3 and 4 Insert the 2 1 4 Handrail Screw G through a Washer E into leg assembly On the back side add another Washer E and secure with a Nut B Do this for the remaining the three holes gt 4 Go back and tighten all screws and nuts DO NOT OVER TIGHTEN AS IT COULD STRIP THE THREADS Components List gt A Base Screw 7 8 1 WARNING gt B Nut 5 This product contains P
Download Pdf Manuals
Related Search