Rod Desyne 100-69-666-D Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS FOR ROD SET NOTE Finial shown is for illustration purpose only It may not represent the style of finial purchased If screws are going directly into wood trim or wall stubs drill a 1 8 pilot hole at pencil marks l Assemble rod and sheer drapery If screwing into drywall follow drywall anchor treatment onto rod instruction in the bottom of the page Place brackets against wall at desired locations Mark screw holes with pencil Be sure marks are level across opening oetme jst Measure R PD eaa MOUNTING FINIALS PIC1 PIC 2 There are two diameters of screw finials onto rod rotate finial on rod lineout base arthe finial white inserts included For a __ for proper alignment if required is sung to insert face three piece rod there is only one diameter of white insert Turn the end of the finial screw clockwise Turn the end of the finial into flatted end of the white insert screw clockwise into flatted end of the white insert until base of the finial is sung to insert face see PIC 1 2 Push each insert into the corresponding size end of the pole with the fins of the insert going into the pole clockwise i FLATTED END Extend rod to desired width Lift rod with drapery and drop into brackets Adjust draperies to desired position Lock rods into position by tightening leveling screw by hand until finger tight this will prevent the rod from moving I2. f screws are going directly into wood trim or wall studs drill 1 8 3mm holes and install screws through bracket If screws are going into hollow wall drill 3 16 5mm holes and push or lightly hammer plastic anchors into holes Then install screws through brackets Do not tighten screws too much just snug is best DRYWALL ANCHOR INSTALLATION
Download Pdf Manuals
Related Search