Home Decorators Collection 1157420930 Instructions / Assembly
Contents
1. DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 15 e ATTACH THE DOUBLE HOOK I TO THE TOP MIRROR FRAME C BY USING THE 1 2 L FLAT HEAD SCREW j 5 15 e INTALL THE WOOD DOWEL a INTO THE UPPER LEFT SIDE PANEL A AND THE UPPER RIGHT SIDE PANEL B e JOIN THE TOP MIRROR FRAME C TO THE UPPER LEFT SIDE PANEL A AND THE UPPER RIGHT SIDE PANEL B 6 15 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE TOP PANEL E e JOIN THE TOP PANEL E TO THE ASSEMBLED PART BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE LONG PLASTIC COVER k e TIGHTEN THE TOP PANEL E AND THE TOP MIRROR FRAME C BY USING THE 1 1 2 L FLAT HEAD SCREWS h 7 15 e INSTALL THE WOOD DOWEL a INTO THE BACK SUPPORT SLAT D e JOIN THE BACK SUPPORT SLAT D TO THE ASSMEBLED PART 8 15 e ATTACH THE MAGNET i INTO BOTTOM OF THE FIXED PANEL F BY USING THE 5 8 L ROUND HEAD SCREW d 9 15 e INSTALL THE WOOD DOWEL a INTO TOP OF THE FIXED PANEL F e JOIN THE FIXED PANEL F TO THE ASSEMBLED PART BY USING THE WOOD DOWEL a FIRST e TIGHTEN THE FIXED PANEL F TO THE ASSEMBLED PART BY U2. HOME DECORATORS COLLECTION SK17012 SHUTTER HALL TREE SINGLE 74 Hx29 5 Wx19 D INV 11574 ASSEMBLY INSTRUCTIONS Made In China 1 15 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembiv PARTS LIST UPPER LEFT UPPER RIGHT SIDE PANEL 1PC SIDE PANEL 1PC BACK SUPPORT SLAT 1PC TOP PANEL 1PC FIXED SHELF 1PC LOWER SIDE PANEL 2PCS BOTTOM PANEL 1PC LEFT DOOR 1PC J e K J RIGHT DOOR 1PG ADJUSTABLE SHELF 1PC UPPER BACK PANEL 2PCS 2 15 5 8 L ROUND HEAD SCREW 47PCS KNOB BOLT 2PCS J L 1 2 L FLAT HEAD SCREW 12PCS METAL PLATE 5PCS 1 1 2 FLAT HEAD SCREW 6PCS MAGNET 1PC LONG PLASTIC COVER 4PCS DOUBLE HOOK 2PCS SHELF PIN 4PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 15 NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE
3. SING THE 1 1 2 L FLAT HEAD SCREW h FROM BOTTOM OF PRE DRILLED HOLES ON THE FIXED PANEL F 10 15 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE BOTTOM PANEL H e JOIN THE LOWER SIDE PANEL G TO THE BOTTOM PANEL H BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE SHORT PLASTIC COVER e 11 15 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO BOTTOM OF THE FIXED PANEL F e JOIN TWO ASSEMBLED PARTS BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE SHORT PLASTIC COVER e 12 15 e TIGHTEN THE UPPER BACK PANEL L AND THE LOWER BACK PANEL M BY USING THE METAL PLATE m AND THE 5 8 L ROUND HEAD SCREW d 13 15 e ATTACH THE LEFT DOOR I AND THE RIGHT DOOR J INTO THE ASSEMBLED PART BY USING THE 1 2 L FLAT HEAD SCREW j e TIGHTEN THE KNOB f TO THE LEFT DOOR I AND THE RIGHT DOOR J BY USING THE KNOB BOLT g 14 15 LIT N e PLACE THE SHELF PIN n IN DESIRED POSITION AND PLACE THE ADJUSTABLE SHELF K ABOVE THE SHELF PIN n 15 15
Download Pdf Manuals
Related Search