Pegasus PGVCL-B Installation Guide
Contents
1. Cat No PGVCS 36 PGVCL 42 Versailles Console INSTALLATION INSTRUCTIONS Tools Needed e Screwdriver Drill amp Bits e 2 Lag Screws or Large Molly Bolts NOT Included e Level e One Tube White or Clear Silicone Wrench Pencil e 3 people are needed to install the console The console top weighs approximately 120 pounds Mounting hardware must be adequate for the type of wall Be sure to re inforce wall before installation We recommend a 2 x12 securely fastened to wall studs at the required height for your installation E 1 Place the large console top upside down on a piece wi m of packing cardboard to prevent scratching Be Me Al _ 2 Place a bead of silicone around the top of each leg n k a 3 Place each leg into the sockets in the front of the console top Make sure the legs are firmly set into h each socket It is best to let the silicone dry for 24 hours to let the legs set 4 After 24 hours stand the console assembly up and support it against the wall 5 Two people should hold the console top in place The other n person should use a level on the back and side edges to help position the top both side to side and front to back correctly 6 Use the pencil to mark the mounting hole positions on the wall 7 Remove the console top and set aside Drill the holes through the 2 x12 re inforced wall 8 Install lag screws molly bolts or other mounting hardware in the wall as2. appropriate 9 Place the console top with legs against the wall and install using the hardware selected then tighten 10 Two people should slightly lift up the front of the console and legs The second person should apply a small amount of silicone to the bottom of each leg to prevent the legs from moving after installation 11 Completely tighten the 2 connections of the console to the wall being careful not to over tighten NOTE DO NOT tighten too much or you may damage console 7 26 10 P 847 244 1234 www barclayproducts com
Download Pdf Manuals
Related Search