Home Decorators Collection 3063000310 Instructions / Assembly
Contents
1. ASSEMBLE THE SHELF SUPPORTS Q AND CAM LOCK CAPS X e INSERT 4 SHELF SUPPORTS Q INTO THE HOLES IN THE SIDE PANEL B C e ATTACH THE CAM LOCKSIK USING 4 CAM LOCK CAPSIX 8 ASSEMBLE THE SHELF D PUT THE SHELF D ONTO THE SHELF SUPPORTS Q 9 10 SAA A ON e A A A 9 ASSEMBLE THE SHEETIRON T DRILL 5 HOLES INTO THE WALL PLEASE REFER TO THE REAR BACK PANEL S HOLE DISTANCE AND HEIGHT e TAP 5 GECKOS V INTO THE HOLES ON THE WALL THEN ROTATE 5 SCREWS U INTO THE GECKOSIV e HANG THE CABINET ONTO THE SHEETIRON T 10 102. HOME DECORATORS COLLECTION 25337 RIDGEMORE MIRROR 30 Hx24 Wx6 5 D INV 30630 ASSEMBLY INSTRUCTIONS Made In China Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Custormer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly STRUCTURAL DIAGRAM 2 10 PARTS LIST TOP PANEL IPC LEFT SIDE PANEL 1PC RIGHT SIDE PANEL IPC SHELF 1PC DOOR 1PC L x 5 8 SCREWS 11PCS smnx 1 2 SCREWS 8PCS HANDLE 1PC SCREW 1PC S 6mmx 3 4 wi SHELF SUPPORTS 4PCS EVA MATS 2PCS SCREWS 5PCS SHEET IRONS 2PCS 3 10 U 7mm x 7 8 V W SCREWS 5PCS GECKOS 5PCS DOWELS 6PCS CAM LOCKS CAPS 4PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 4 10 NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL
3. THEY ARE TIGHT THE SHOULDER SHOULD BE D ie DER AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL ARROW NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 5 10 1 ASSEMBLE THE RIGHT SIDE PANEL C 6 CAM BOLTS J AND INSERT 3 DOWELS W INTO THE HOLES IN THE RIGHT SIDE PANEL C e PLACE THE CAM BOLTS J INTO THE HOLES IN THE AND ATTACH USING 6 CAM LOCKSIK 2 ASSEMBLE THE LEFT SIDE PANEL B e ROTATE 6 CAM BOLTS J AND INSERT 3 DOWELS W INTO THE HOLES IN THE LEFT SIDE PANEL B e PLACE THE CAM BOLTS J INTO THE HOLES IN THE PANEL WE F AND ATTACH USING 6 CAM LOCKSIK 6 10 3 ASSEMBLE THE BACK PANEL G e ATTACH THE BACK PANEL G USING 11 SCREWSIL 4 ASSEMBLE THE SHEETIRON T e ATTACH THE SHEETIRON T TO BACK PANEL G USING 5 SCREWS S e ATTACH 2 EVA MATS R TO BACK PANEL G 7 10 5 ASSEMBLE THE DOOR H e ATTACH THE HANDLE O TO DOOR H USING 1 SCREW P ATTACH 2 HINGES M TO DOOR H USING 4 SCREWS N 6 ASSEMBLE THE DOOR H ATTACH THE DOOR H TO RIGHT SIDE PANEL C USING 4 SCREWS N 8 10 7
Download Pdf Manuals
Related Search