DreamLine DL-6439L-01CL Installation Guide
Contents
1. 60 Rev 2 5 07 2013 c 7 Outline the position of the Wall bracket 12 on the wall Set Stationary glass A 01 aside Remove the Wall bracket from Stationary glass A and by replacing it to the outlined position mark the hole on the wall Drill the hole using 5 16 drill bit insert the Wall anchor 06 and fasten the Wall bracket to the wall 2 2 with the Round head screw ST4 2x55 07 2 5 Put Stationary glass A back into position and tight fus it up to the Wall Bracket foul See Fig 7 for details 8 Mount the Wall Bracket 12 on Stationary glass B 20 Slide the glass into the channel on the other side of v the Guide 03 we Ed See Fig 8 for details MIRAGE 60 Rev 2 Ver 5 07 2013 8 9 Butt up Stationary glass 20 against the wall and level it vertically See fig 9 for details 10 Outline the position of the Wall bracket 12 on the wall Set Stationary glass B 20 aside Remove the Wall bracket from Stationary glass B and by replacing it to the outlined position mark the hole on the wall Drill the hole using 5 16 drill bit insert the Wall anchor 06 and fasten the Wall bracket to the wall with the Round head screw 4 2 552. 5 16 drill bit insert the Wall anchor 06 and fasten the Support bar s wall A bracket to the wall with the Countersunk screw Sr ST4 2x40 16 6 Attach the Support bar back to its wall bracket and N Sliding Bracket assembly and tighten the screws to EN See Fig 22 for details Y MIRAGE 60 Rev 2 5 07 2013 15 20 the sealant along the connection of Stationary glasses A and B with the wall inside the shower as well as between the Guide rail 03 and the threshold outside the shower See Fig 23 and Fig 24 for details MIRAGE 60 Rev 2 Ver 5 07 2013 Fig 23 Fig 24 16 NOTICE The above installation steps are given for the right hand configuration Stationary glass A and B and attach the Sliding bracket assembly 12 to Stationary glass A For left hand configuration door please reverse See Fig 25 for details Fig 25 Product Maintenance To ensure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface
3. Installation of DreamLine product by anyone other than fully insured licensed professionals shall VOID THE WARRANTY DreamLine recommends that such licensed professionals have experience in the installation of bathroom products Installation of certain products including without limitation glass products i e shower and tub doors by an inexperienced installer may result in glass breakage and consequently cause personal injury or death PARTS ONLY WARRANTY This warranty is extensive in that it covers replacement of all defects LABOR CHARGES AND OR DAMAGE INCURRED IN INSTALLATION REPAIR OR REPLACEMENT AS WELL AS ANY OTHER KIND OF LOSS OR DAMAGE ARE EXCLUDED COMMERCIAL USE AND OTHER EXCLUSIONS This warranty excludes all industrial commercial and business usage whose purchasers are hereby extended a one 1 year limited warranty from the date of purchase for shower and tub doors a three 3 month limited warranty from the date of purchase for vanities and sinks with all other terms of this warranty applying except the duration of the warranty DREAMLINE JETTED AND STEAM SHOWER CABINS DREAMLINE SHOWER COLUMNS AND DREAMLINE SHOWER SEATS ARE NOT INTENDED FOR COMMERCIAL USE AND THERE IS NO WARRANTY EXTENDED FOR THESE PRODUCTS FOR COMMERCIAL USE DreamLine hereby disclaims all warranties for products sold as dealer or store displays DreamLine hereby disclaims all warranties for products used outside of the United States or Canada whether expresse
4. OREAMLINE ream in style Mirage Shower Door amp Base Kit SHOWER Door AND SHOWER KIT INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page STEP 1 Install Shower Base Shower Base Installation Instructions STEP 2 Install Shower Door Shower Door Installation Instruction Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Kit please visit www BathAuthority com dream in style MIRAGE SHOWER DOOR amp TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the rights to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page Please read these instructions carefully before installing If you hav
5. 07 Put Stationary glass B back into position and tight it up to the Wall Bracket See Fig 10 for details MIRAGE 60 Rev 2Ver 5 07 2013 Fig 9 22222 11 Push the Single side strip 13 between the groove of the 2 Guide rail 03 and both Stationary glasses A amp B using wooden shims or other piece of wood E See fig 11 for details 12 Glass shelves 19 are installed to Stationary x glass B 20 e Mark the Glass shelf position on the wall ms According to the measurements in Fig 12 1 mark drill holes for the shelf brackets Drill the holes using 5 16 drill bit and inset JU the Wall anchors 06 a LE Attach the Shelf brackets without nut 17 to A the wall with Countersunk screw ST4 2x40 0 5 16 16 and attach Shelf brackets with nut 18 SN 4 to Stationary glass Insert the Glass shelf into the Shelf brackets IN and tighten the screws at the bottom of the brackets Start installation with top Glass shelf and 3 i 6 repeat this step to install the bottom Glass ws Suc in CA YS IQ III 0 See Fig 12 and Fig 13 for details Fig 12 MIRAGE 60 Rev 2 5 07 2013 10 NOTE Please refer to Sli
6. 25 m DLT 2040400 40 22 5 16 14 3 8 DLT 2042420 arxar a SLIMLINE SHOWER Rev 3 Ver 5 07 2013 QUARTER ROUND SHOWER DLT 7033330 33 x33 21 5 8 DLT 7036360 36 36 21 5 8 DLT 7038380 38 x38 21 5 8 SLIMLINE SHOWER Rev 3 Ver 5 07 2013 DOUBLE THRESHOLD SHOWER BASE Corner Drain Configuration MODEL SPECIFICATION W in C in 00721032320 37x37 DLT 1036360 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Left Hand Drain Configuration WI1 D1 MODEL SPECIFICATION D1 in W1 in DLTA0M4B ir iX DLT 1036481 36 x48 DLT 1036601 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Right Hand Configuration W1 D1 DLT 1034482 34 x48 MODEL SPECIFICATION D1 in W1 in 6 DLT 1036482 36 x48 DLT 1036602 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 10 Diagram of the Shower Base a Cross Section Finished Wall ya board Shower Base OOOO Mortar Plaster 2 x4 Stud Drain 2 PVC Waste Pipe SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 11 Shower Base Installation Preparation 1 Ensure that the floor and the studs are at right angle Provide a 5 x5 opening in the sub floor for the drain The 2 PVC waste pipe should extend above the surface of the sub floor according to the drain installation instructions and the height of the Shower base Refer to
7. To ensure long lasting life for your glass shower products wipe them off after each use with a soft cloth Rinse and wipe off the glass using either soft cloth or squeegee to prevent soap buildup Never use abrasive cleaners and cleaning products that contain scouring agents as this may scratch the surface Never use bristle brushes or abrasive sponges To ensure a long lasting hardware finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corrosion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not against across the grain Never use an abrasive sponge or cloth steel wool or wired brushes MIRAGE 60 Rev 2 Ver 5 07 2013 17 lt BREAMLINE ream in style SLIMLINE SHOWER BASE SHOWER BASE DIMENSIONS AND INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page Please read these instructions carefully before installing If you have any questions regarding installation please call
8. EATH TO ANY PERSON OR FOR ANY DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE LOSS OF USE LOSS OF TIME LOSS OF PROFITS INCONVENIENCE INCIDENTAL EXPENSES LABOR OR MATERIAL CHARGES OR ANY OTHER COSTS RESULTING FROM THE USE OF ITS PRODUCTS OR PERTAINING TO THE APPLICATION OF THE PRESENT WARRANTY OR RESULTING FROM THE REMOVAL OR REPLACEMENT OF ANY PRODUCT OR ELEMENT OR PART COVERED BY THIS WARRANTY PRODUCT WARRANTY PERIODS DreamLine is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty DreamLine reserves the right to modify this warranty at any time such warranty modifications will not alter the warranty applicable at the time of sale of the products in question The warranty terms for specific products for consumer non industrial non commercial non business use only are SHOWER BACKWALL SHOWER CABINS JETTED amp STEAM DreamLine warrants shower backwalls and shower cabins to be free from defects in workmanship for a period of one 1 year from initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER amp TUB DOORS SHOWER ENCLOSURES DreamLine warrants shower doors tub doors and shower enclosures to be free from defects in workmanship and materials under normal residential use for a period of five 5 years from the initial date of purchase by the owner end user contractor or
9. builder from an authorized dealer Warranty for plastic strips shall be limited to one 1 year Warranty for any part in Oil Rubbed Bronze finish shall be limited to one 1 year SHOWER BASES DreamLine warrants shower bases to be free from defects in workmanship and materials under normal residential use for as long as the original consumer purchaser owns their home in which their product is installed SHOWER COLUMNS DreamLine warrants shower columns to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER SEATS DreamLine warrants shower seats to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer Warranty shall be VOID if the shower seat is not professionally installed on a properly reinforced wall VANITIES AND VESSEL SINKS DreamLine warrants bathroom vanities and vessel sinks to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer STATE LAWS AND THIS WARRANTY Some states provinces do not allow limitations on how long an implied warranty lasts or the exclusion or li
10. d or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose WARRANTY TERMS DreamLine will at its election repair or replace the product found by DreamLine in its sole judgment to be defective within the warranty period under normal residential use and maintenance The replacement of a product is limited to supplying a replacement product or part same as existing or if not available comparable product DreamLine warranty obligation shall be discharged upon tender of parts replacement or repair of the product Purchaser s refusal to accept the tender terminates all warranty obligations and VOIDS THE WARRANTY Cost of freight for returning products to DreamLine for repairs or replacement under this limited warranty are the responsibility of the customer Cost of freight associated with shipping of replacement product or parts to the customer may be charged to customer Any product replaced or repaired during the warranty period will be covered only for the remaining period of the original warranty In no event will DreamLine be liable for costs of repair or replacement of any installation material including but not limited to tiles marble etc DREAMLINE IS NOT RESPONSIBLE FOR INSTALLATION REMOVAL OR REINSTALLATION COSTS OF ANY PRODUCT REQUIRING WARRANTY SERVICES Any modification or alteration of any DreamLine products will void the warranty DreamLine product installations and repairs must b
11. ding bracket assembly 09 diagram on Page 4 13 Disassemble the Sliding bracket assembly Mount the Face Plate A and Back Plate B on the top of Stationary glass 01 with the Head screw M6 X 16 C Use PVC gasket D and PVC washer E in between glass and metal parts NOTE Use only hand tools Do not over tighten the screws See Fig 14 and Fig 15 for details MIRAGE 60 Rev 2Ver 5 07 2013 Fig 13 Fig 14 14 Install the Stopper block 11 on the bottom of the Glass door 02 Fig 15 See fig 16 for details 4 MIRAGE 60 Rev 2 Ver 5 07 2013 Fig 16 12 15 Bring the Glass door 02 inside the shower Remove nuts from the Roller assembly 10 bolts and spread the rollers against the installation holes on the Glass door Fasten the Roller assembly to the Glass door through the predrilled holes NOTE Steps 15 and Steps 16 require 1 second person to hold Glass door The Glass door will not stay by itself until you finish the Step 16 See Fig 17 for details NOTE Please refer to Sliding bracket assembly 09 diagram on Page 4 16 Place the Slider over the top edge of the Glass door 02 and put the Sliding bracket assembly together using Head scr
12. e any questions regarding installation please call our technical support specialists Monday through Friday 9 00 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Doors and Tub Doors please visit www BathAuthority com Preparation 1 After opening all boxes and packages read this introduction carefully Check that all of the needed parts are included in the package by marking all the components on the Detailed Diagram of Shower Door Components Examine boxes and packages for shipping damage If the unit has been damaged has a finishing defect or is missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions 2 Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project and will not accept any returns 3 If this unit is going to be installed in a new construction install all of the required plumbing and drainage before installing the shower Use a competent and licensed if re
13. e performed by either a DreamLine authorized agent or a licensed insured and experienced professional contractor installation or repairs performed by any other party shall void the warranty This warranty shall not apply to breakage or damages caused by normal wear and tear fault carelessness abuse misuse misapplication improper maintenance alteration or modification of the unit as well as chemical or natural corrosion accident fire flood act of God or any other casualty Improper care and cleaning will void the warranty Use of cleaners containing abrasive cleansers ammonia bleach acids waxes alcohol solvents or other products not recommended for chrome or similar finish glass or acrylic will void the warranty For additional product maintenance instructions please refer to product installation manual DreamLine is not responsible for any issues arising in connection with errors or omissions in information provided on DreamLine s websites The warranty does not extend to any non DreamLine plumbing or components installed by installers end users or by any party other than DreamLine THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE BATH AUTHORITY LLC DREAMLINE AND OR SELLER DISCLAIMS ALL LIABILITY FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES DREAMLINE IS NOT LIABLE FOR PERSONAL INJURIES OR D
14. efully and inspect it Lay it out and identify all parts using parts diagram and part list in your manual as a reference Before discarding the carton check for small hardware bags that tend to fall to the bottom of the box If any parts are damaged or missing please contact DreamLine for replacement NOTE Retain these installation instructions for future reference MIRAGE 60 Rev 2 Ver 5 07 2013 3 Sliding Bracket Assembly 1 F HemiscewMdxih _____ Head screw M6x16 pcs C D 1 67 2pes I 1 8 woostip 4ps 17167 PVCwasher 2pes 3 Plastic bulkhead ________ Bpcs MIRAGE 60 Rev 2 Ver 5 07 2013 4 Shower Tub Door Installation NOTE The installation of this door requires two installers NOTE The door can be installed on the shower base tub or custom threshold 1 Measure the distance between two walls This distance is marked as W See Fig 1 for details 2 Your Guide rail 03 has been precut for your Shower model opening width 60 If W width of your wall to wall opening is equal to 60 it is unnecessary to cut the Guide rail and you can continue to Step 3 If W width of your wall to wall opening is less than 60 you will need to cut the Guide rail from one side The length to cut off will be D D Subtract W from 60 FOR EXAMPLE If your wall opening Wz59 Yo
15. ew 4 X 10 F NOTE Sliding bracket assembly 09 can be installed for either left or right hand configurations These directions are written for right hand configuration See Page 17 for left hand configuration See Fig 18 and Fig 19 for details MIRAGE 60 Rev 2Ver 5 07 2013 17 Press the Magnetic strip 14 on the vertical edge of the Glass door 02 and Stationary glass B 20 Push the Seal gasket 15 into the channel of the Guide rail 03 See Fig 20 for details MIRAGE 60 Rev 2 Ver 5 07 2013 Fig 19 2 T Fig 20 18 Install the Handle 04 onto the Glass door 02 19 Locate the Support bar 05 and temporarily fasten 2 2 it to the Sliding bracket assembly 09 with the Lau Head screw 6 8 Adjust the bar to a proper position and level horizontally Hold it firmly and outline the wall bracket of the Support to mark wall with nu position 2 gt 5 Remove the Support bar and detach its wall bracket m Place the wall bracket of the Support bar against its co S outlined position on the wall and mark the hole for o drilling Drill the hole using
16. mitation of special incidental or consequential damages so these limitations and exclusions may not apply to you This warranty gives you specific legal rights You may also have other rights which vary from state province to state province WARRANTY SERVICE The following information will be required for you to file a Warranty claim 1 Your name address and telephone number 2 Product model number 3 Brief description of problem please note that additional information such a photos may be required to fully process your warranty claim 4 Proof of purchase You may submit this information by e mail mail or fax to DreamLine Warranty Service Center 75 Hawk Road Warminster PA 18974 F 1 866 857 3638 T 1 866 731 2244 Warranty bathauthority com dream in style TEL 866 731 2244 FAX 866 227 1533 WWW BATHAUTHORITY COM For more information on DreamLine Shower Doors please visit www BathAuthority com
17. our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Bases please visit www BathAuthority com Preparation 1 Examine boxes packages for shipping damage Carefully remove Shower base from the packaging and check for any visual defects or shipping damages If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions Install all of the required plumbing and drainage before installing the shower Use a competent and licensed if required by local code plumber for all plumbing installation Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project Please insure that prior to the installation the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles While some adjus
18. quired by local code plumber for all plumbing installation 4 Prior to installation ensure that the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles Irregular installation surface level or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process 5 This unit must be installed against finished walls and floor 6 Please NOTE This door does not have out of plumb adjustment Make sure your walls are vertical and your shower base or threshold is leveled Tools Required ad Tape Phillips Drill bit Caulk Measure Pencil Screwdriver 5 16 5 Level Gun EET Hammer Wrench MIRAGE 60 Rev 2 Ver 5 07 2013 2 Detailed Diagram of Shower Tub Door Components 20 17 Parts List 02 Glass door i2 Walbrket Guider 13 Singlesidestip 1 _ 05 Supportbar ipe 15 Sealgasket 06 Wall anchor 16 Countersunk screw 5142540 ipc 08 Guide rail connector 18 Shelf bracket with nut 2pcs 09 Siding bracket assembly __ 19 pcs 110 Roller assembly 2pcs 20 StationaryglassB ipe NOTE Unpack your unit car
19. se abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface Never use bristle brushes or abrasive sponges To assure a long lasting finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corrosion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not across the grain Never use abrasive sponge or cloth steel wool or wired brushes SLIMLINE SHOWER Rev 3 Ver 5 07 2013 16 DREAMLINE EXCLUSIVE LIMITED WARRANTY AS OF MAY 6 2013 This warranty extends only to the original owner end user for household use only and is not transferable to a subsequent owner This warranty extends for a designated period of time so long as it remains in use in its original place of installation This warranty applies only to DreamLine products purchased from an authorized dealer in United States or Canada Proof of purchase original sales receipt from the original consumer purchase must be provided with all warranty claims IN NO EVENT SHALL THE LIABILITY OF DREAMLINE EXCEED THE PURCHASE PRICE OF THE UNIT DreamLine products must be installed by a fully insured and licensed professional
20. the product drawings in these installation instructions for the drain location See Fig 1 and Fig 2 for details SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 2 PVC Waste Pipe 5 x5 Opening See Product Chart for Drain Location Fig 1 x 2 PVC Waste Pipe 5 x5 Opening See Product Chart for Drain Location Fig 2 12 2 Install the shower drain NOT PROVIDED according to the drain installation manual supplied with the drain See Fig 3 for details 3 Place the tray into the designated position so that the Drain Body drops around the Drain Pipe and butt the Shower Base up against the studs See Fig 4 for details Lift and lower base over the center of The drain pipe and set it into the place Fig 4 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 13 4 Level the tray and place marks the studs above the upper edge of the tile flange See Fig 5 for details Level base in two directions Fig 5 5 Mix the bedding material Mortar Plaster etc Concrete is not recommended Apply enough bedding material to support the entire bottom of the shower base See Fig 6 for details Mortar Plaster Fig 6 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 14 6 After the bedding material has been poured and before it sets place the shower base into the position with the drain assembly sliding over the PVC waste pipe It will be necessary to push the sho
21. tment in leveling of the tray is possible irregular installation surface level or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process IMPORTANT NOTE Dimensions provided for reference only You must measure the actual shower tray sizes before installation Allowed tolerance for center of the drain is 1 2 Tools Required Tape Measure Pencil L evel SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 2 SINGLE THRESHOLD SHOWER BASE Center Drain Configuration U MODEL SPECIFICATION D1 in DLT 1132320 32 32 DLT 1136360 36 x36 DLT 1136480 36 x48 30760 327x607 Mex i9 3 _ 60 3 60 i9 30 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Left Hand Drain Configuration MODEL SPECIFICATION D1 in WT1 30 i7 32 15 DLT 1132601 32 x60 L 82 T 60 4 12 DLT 1134601 34 x 60 34 60 DLT 1136601 36 x60 SLIMLINE SHOWER Rev 3 Ver 5 07 2013 Right Hand Configuration WI D1 MODEL SPECIFICATION D1 in W1 in 30 x 60 mo ox ow ode oam omaa 36x59 1 i17 _ 36 6 ix _ SLIMLINE SHOWER Rev 3 Ver 5 07 2013 NEO SHOWER 01722036360 36736 185 16 DLT 2088380 38538 38 20516
22. ur shower model is 60 D 60 59 1 You have to cut 1 off from the rail See Fig 2 for details MIRAGE 60 Rev 2Ver 5 07 2013 Fig 2 3 Fasten the Guide rail connector 08 to one J 4 C of the sides of the Guide rail 03 A Slide in two Roller assemblies 10 from the other end of the Guide rail Fasten another Guide rail connector to the other side of the Guide rail Position the Guide rail on base or threshold and trace through predrilled holes of Guide oz 5 rail connector flange to mark wall Drill the j holes using 5 16 drill bit and insert the Wall anchor 06 Apply a layer of waterproof silicone to the bottom side of the Guide rail Place the Guide rail back on base or threshold and secure it with the Round head screw E du ST4 2x55 07 See Fig 3 for details Fig 3 4 View of the installed Guide rail 03 with the Guide rail connectors 08 See Fig 4 for details Fig 4 MIRAGE 60 Rev 2Ver 5 07 2013 6 5 Mount the Wall bracket 12 to Stationary glass A 01 Slide the glass into the channel of the Guide rail 03 See Fig 5 for details 6 Butt up Stationary glass 01 against the wall and level it vertically See Fig 6 for details MIRAGE
23. wer base until the top of the tile flange aligns with the marks drawn on the studs and the front edge is contacting the rough floor along the entire length of the shower base Ensure that the base is level in all directions You may need to use shims to hold the tray in the level until the bedding settles and supports the tray Remove all extra mortar See Fig 7 for details Fig Waterproof Drywall Waterproof Drywall 7 Allow the bedding material to completely harden before applying weight to the bottom of the shower base Install the cement board or the wallboard above the tile flanges and secure it to the studs Put the tiles or other finishing material over the cement board leaving 1 8 gap between the bottom of the tile and the Caulk Ceramic Tile splash rim of the shower base Use caulk to fill that gap See Fig 8 and Fig 9 for details SLIMLINE SHOWER Rev 3 Ver 5 07 2013 15 Product maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface To insure long lasting life for your glass shower products wipe them off after each use with a soft cloth Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup Never u
Download Pdf Manuals
Related Search