DreamLine DL-6205R-04CL Installation Guide
Contents
1. Style A Style B Style C Style D Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Doors and Enclosure please visit www BathAuthority com Preparation 1 After opening all boxes and packages read this introduction carefully Check that all of the needed parts are included in the package by marking all the components on the Detailed Diagram of Shower Door Components Examine boxes and packages for shipping damage If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions 2 Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project and will not accept any returns 3 Please ensure2. 27 Style 25 Please draw the vertical lines on the wall for the Glass door A and the Return panel B according to the size of your model in the size table below See Fig 27 for details Size Table 0B 1 __ 2 ___ SHDR GL2012 307210 29 1 2 48mm SHDR GL2012 327210 31 1 2 800 SHDR GL2012 347210 33 3 8 849mm Elegance Rev 4 Ver 1 07 2013 Style D 21 26 Apply clear silicone along the inner channel of the Glass profile 04 and push the Stationary glass 21 inside the channel NOTE If you have difficulty sliding the Glass profile over the Stationary glass you can slightly tap on the Glass profile with a rubber mallet and a piece of wood Please do not strike directly on the profile See Fig 28 for details 27 Place the Wall profile for glass door 01 on the shower base or the threshold vertically against the finished wall Adjust the Wall profile for glass door vertically using a level Mark the drill holes on the wall through the predrilled holes in the Wall profile for glass door Now drill holes in the wall and insert the Wall anchor 12 See Fig 29 for details Elegance Rev 4 Ver 1 07 2013 22 28 Push the Pivot retainers 08 into both ends of the Wall profile for glass door 01 See fig 30 for detai
3. ream in style Eleqance Shower Door amp Base Kit SHOWER Door AND SHOWER INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page STEP 1 Install Shower Base Shower Base Installation Instructions STEP 2 Install Shower Door Shower Door Installation Instruction Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Kit please visit www BathAuthority com DREAMLINE ELEGANCE SHOWER DOOR ENCLOSURE INSTALLATION INSTRUCTIONS MODEL STYLE SELECTOR _ Please choose your door model style and selector according to your order for easy installation IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page
4. Elegance Rev 4 Ver 1 07 2013 NOTICE The Glass door has 2 cuts for the Pivot assemblies The deeper cut must be on the top 6 Remove the Bolts L and Back plates K from the upper and bottom Pivot assemblies 07 Place the Glass door 03 to the Pivot assemblies attach Back plates K to its position and fasten tight the Bolts Make sure the clear rubber Spacers J are in between the glass and the metal parts Secure tide the Glass door to the Pivot assemblies See Fig 6 for details 7 Mount the Handle 06 onto the Glass door 03 See Fig 7 for details Elegance Rev 4 Ver 1 07 2013 8 Open the Glass door 03 See Fig 8 for details 9 Close the hole in the bottom Pivot retainer 08 with Flat head socket bolt M6x12 18 or you can attach the Pivot retainer to the Shower base or threshold using Big flat head screw ST4 2 x40 16 Apply silicone sealant over the Screw 16 or Bolt 18 to prevent leakage See Fig 9 for details Elegance Rev 4 Ver 1 07 2013 10 10 Push the Anti water strip 10 into the vertical groove of the Glass profile for glass door 02 Attach the Bottom anti water strip 11 onto the glass door You can cut the strips to size by using a knife See Fig 10 for details Elegance Rev 4 Ver 1 07 2013 11 ATTENTION Steps 11 16 Follow these steps if the width of your door is less than 3734 and you are installing the door without sta
5. using a level Mark the drill holes on the wall through the predrilled holes in the Wall profile for glass door Now drill holes in the wall and insert the Wall anchors 12 See Fig 1 for details Elegance Rev 4 Ver 1 07 2013 2 Push the Pivot retainers 08 into both ends of the Wall profile for glass door 01 See Fig 2 for details 3 Runa silicone bead along the holes on the wall Attach the Wall profile for glass door 01 and Pivot retainer 08 to the wall using Big flat head screws ST4 2x40 16 See Fig 3 for details Fig 3 Elegance Rev 4 Ver 1 07 2013 4 Attach the Pivot assem bly 07 to the t op an d the bottom ends 1 o of the Glass profile for glass door 02 with the Flat head ESS screws ST4 2x25 15 and M4x16 bolt 13 See Fig 4 for details NOTE The Back plate of the Pivot assembly should face 2 inside of your shower 5 Slide the Glass profile for glass door 02 with Pivot assemblies 07 into the groove of the Wall profile for glass door 01 and CR secure the upper Pivot retainer 08 to the upper Pivot assembly 07 with Round SS head socket bolt M6x12 17 See 5 for details
6. DreamLine warrants shower columns to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER SEATS DreamLine warrants shower seats to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer Warranty shall be VOID if the shower seat is not professionally installed on a properly reinforced wall VANITIES AND VESSEL SINKS DreamLine warrants bathroom vanities and vessel sinks to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer STATE LAWS AND THIS WARRANTY Some states provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of special incidental or consequential damages so these limitations and exclusions may not apply to you This warranty gives you specific legal rights You may also have other rights which vary from state province to state province WARRANTY SERVICE The following information will be required for you to file a Warranty claim 1 Your name address and telephone number 2 Product model number 3 Brief descr
7. PERIODS DreamLine is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty DreamLine reserves the right to modify this warranty at any time such warranty modifications will not alter the warranty applicable at the time of sale of the products in question The warranty terms for specific products for consumer non industrial non commercial non business use only are SHOWER BACKWALL SHOWER CABINS JETTED amp STEAM DreamLine warrants shower backwalls and shower cabins to be free from defects in workmanship for a period of one 1 year from initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER amp TUB DOORS SHOWER ENCLOSURES DreamLine warrants shower doors tub doors and shower enclosures to be free from defects in workmanship and materials under normal residential use for a period of five 5 years from the initial date of purchase by the owner end user contractor or builder from an authorized dealer Warranty for plastic strips shall be limited to one 1 year Warranty for any part in Oil Rubbed Bronze finish shall be limited to one 1 year SHOWER BASES DreamLine warrants shower bases to be free from defects in workmanship and materials under normal residential use for as long as the original consumer purchaser owns their home in which their product is installed SHOWER COLUMNS
8. any visual defects or shipping damages If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions Install all of the required plumbing and drainage before installing the shower Use a competent and licensed if required by local code plumber for all plumbing installation Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project Please insure that prior to the installation the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles While some adjustment in leveling of the tray is possible irregular installation surface level or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process IMPORTANT NOTE Dimensions provided for reference only You must measure the actual shower tray sizes before installation Allowed tolerance for ce
9. finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corrosion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not across the grain Never use abrasive sponge or cloth steel wool or wired brushes Elegance 4 Ver 1 07 2013 33 lt BREAMLINE ream in style SLIMLINE SHOWER BASE SHOWER BASE DIMENSIONS AND INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Bases please visit www BathAuthority com Preparation 1 Examine boxes and packages for shipping damage Carefully remove Shower base from the packaging and check for
10. injury or death PARTS ONLY WARRANTY This warranty is extensive in that it covers replacement of all defects LABOR CHARGES AND OR DAMAGE INCURRED IN INSTALLATION REPAIR OR REPLACEMENT AS WELL AS ANY OTHER KIND OF LOSS OR DAMAGE ARE EXCLUDED COMMERCIAL USE AND OTHER EXCLUSIONS This warranty excludes all industrial commercial and business usage whose purchasers are hereby extended a one 1 year limited warranty from the date of purchase for shower and tub doors a three 3 month limited warranty from the date of purchase for vanities and sinks with all other terms of this warranty applying except the duration of the warranty DREAMLINE JETTED AND STEAM SHOWER CABINS DREAMLINE SHOWER COLUMNS AND DREAMLINE SHOWER SEATS ARE NOT INTENDED FOR COMMERCIAL USE AND THERE IS NO WARRANTY EXTENDED FOR THESE PRODUCTS FOR COMMERCIAL USE DreamLine hereby disclaims all warranties for products sold as dealer or store displays DreamLine hereby disclaims all warranties for products used outside of the United States or Canada whether expressed or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose WARRANTY TERMS DreamLine will at its election repair or replace the product found by DreamLine in its sole judgment to be defective within the warranty period under normal residential use and maintenance The replacement of a product is limited to supplying a replacement product or part same as exist
11. 0 37x37 DLT 1036360 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Left Hand Drain Configuration WI1 D1 MODEL SPECIFICATION D1 in W1 in DLTA0M4B ir iX DLT 1036481 36 x48 DLT 1036601 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Right Hand Drain Configuration W1 D1 DLT 1034482 34 x48 MODEL SPECIFICATION D1 in W1 in 6 DLT 1036482 36 x48 DLT 1036602 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 10 Diagram of the Shower Base in a Cross Section Finished Wall board Shower Base OOOO Mortar Plaster 2 x4 Stud Drain 2 PVC Waste Pipe SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 11 Shower Base Installation Preparation 1 Ensure that the floor and the studs are at right angle Provide a 5 x5 opening in the sub floor for the drain The 2 PVC waste pipe should extend above the surface of the sub floor according to the drain installation instructions and the height of the Shower base Refer to the product drawings in these installation instructions for the drain location See Fig 1 and Fig 2 for details SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 2 PVC Waste Pipe 5 5 Opening See Product Chart for Drain Location Fig 1 x 2 PVC Waste Pipe 5 x5 Opening See Product Chart for Drain Location Fig 2 12 2 Install the shower drain NOT PROVIDED according to t
12. along the inner channel of the Glass profile 04 and push the Stationary glass 21 inside the channel NOTE If you have difficulty sliding the Glass profile over the Stationary glass you can slightly tap on the Glass profile with a rubber mallet and a piece of wood Please do not strike directly on the profile NEVER use the metal hammer or hit the profile without the wood bumper Push the Stationary glass with attached Glass profile inside the Wall profile 05 See Fig 17 for details NOTE Please note that the hole in the corner of the Glass panel should be at the bottom farther from the wall Press the Anti Water strip 28 onto the vertical edge of the Stationary glass 21 Align the Stationary glass with the Glass Door 03 and then close the Glass door If needed adjust the position of the Stationary glass to make sure the Anti water strip and the Glass door work well See Fig 18 for details Elegance Rev 4 Ver 1 07 2013 Fig 18 16 19 Draw a line along the inner edge of the Wall profile 05 on the wall Detach the Wall profile from the Stationary glass 21 and the Glass profile 04 assembly Place the Wall profile to the outlined position and mark the drilling holes through the predrilled holes in the Wall profile Now drill the holes using O 5 16 drill bit in the wall See Fig 19 for details 20 Insert the Wall anchors 12 into the holes and apply silicone along the Wall profil
13. e 05 and around the holes Fasten the Wall profile to the wall with the Big flat head Screw 514 2 40 16 Push the Stationary glass 21 with the Glass profile 04 back into the Wall profile See Fig 20 for details Elegance Rev 4 Ver 1 07 2013 Fig 19 Fig 20 17 21 Adjust the Stationary glass 21 position to ensure that when the Glass door 03 is closed there is a gap 1 16 1 8 between the two glass panels To adjust and secure the Stationary glass in place install the Bottom Bracket 27 to the Stationary glass Mark the drilling hole for the bracket Make sure the mark is clear and visible and drill the hole using 01 8 drill bit Use the Round head screws ST4 2X 35 25 to attach the Bottom Bracket to the shower base or the threshold Cover the screw head with Decorative screw cover 26 See Fig 21 for details 22 After final adjustments of the Assembled unit drill the holes in the Glass profiles 2 and 4 through predrilled holes in the Wall profiles 1 and 5 using O 1 8 drill bit NOTE You only need to drill through the first layer of the Glass Profiles Use Round head screws ST4 2x10 14 to secure the Glass profiles inside of the Wall profiles Cover the exposed screw holes with Decorative cover 09 See Fig 22 for details Elegance Rev 4 Ver 1 07 2013 23 Apply silicone sealant between the tray or thresh
14. he drain installation manual supplied with the drain See Fig 3 for details 3 Place the tray the designated position so that the Drain Body drops around the Drain Pipe and butt the Shower Base up against the studs See Fig 4 for details Lift and lower base over the center of The drain pipe and set it into the place Fig 4 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 13 4 Level the tray and place marks on the studs above the upper edge of the tile flange See Fig 5 for details Level base in two directions Fig 5 5 Mix the bedding material Mortar Plaster etc Concrete is not recommended Apply enough bedding material to support the entire bottom of the shower base See Fig 6 for details Mortar Plaster Fig 6 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 14 6 After the bedding material has been poured and before it sets place the shower base into the position with the drain assembly sliding over the PVC waste pipe It will be necessary to push the shower base until the top of the tile flange aligns with the marks drawn on the studs and the front edge is contacting the rough floor along the entire length of the shower base Ensure that the base is level in all directions You may need to use shims to hold the tray in the level until the bedding settles and supports the tray Remove all extra mortar See Fig 7 for details Fig 7 Waterpr
15. ing or if not available comparable product DreamLine warranty obligation shall be discharged upon tender of parts replacement or repair of the product Purchaser s refusal to accept the tender terminates all warranty obligations and VOIDS THE WARRANTY Cost of freight for returning products to DreamLine for repairs or replacement under this limited warranty are the responsibility of the customer Cost of freight associated with shipping of replacement product or parts to the customer may be charged to customer Any product replaced or repaired during the warranty period will be covered only for the remaining period of the original warranty In no event will DreamLine be liable for costs of repair or replacement of any installation material including but not limited to tiles marble etc DREAMLINE IS NOT RESPONSIBLE FOR INSTALLATION REMOVAL OR REINSTALLATION COSTS OF ANY PRODUCT REQUIRING WARRANTY SERVICES Any modification or alteration of any DreamLine products will void the warranty DreamLine product installations and repairs must be performed by either a DreamLine authorized agent or a licensed insured and experienced professional contractor installation or repairs performed by any other party shall void the warranty This warranty shall not apply to breakage or damages caused by normal wear and tear fault carelessness abuse misuse misapplication improper maintenance alteration or modification of the unit as well as chemical or natural corrosio
16. ion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not across the grain Never use abrasive sponge or cloth steel wool or wired brushes SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 16 DREAMLINE EXCLUSIVE LIMITED WARRANTY AS OF 6 2013 This warranty extends only to the original owner end user for household use only and is not transferable to a subsequent owner This warranty extends for a designated period of time so long as it remains in use in its original place of installation This warranty applies only to DreamLine products purchased from an authorized dealer in United States or Canada Proof of purchase original sales receipt from the original consumer purchase must be provided with all warranty claims IN NO EVENT SHALL THE LIABILITY OF DREAMLINE EXCEED THE PURCHASE PRICE OF THE UNIT DreamLine products must be installed by a fully insured and licensed professional Installation of DreamLine product by anyone other than fully insured licensed professionals shall VOID THE WARRANTY DreamLine recommends that such licensed professionals have experience in the installation of bathroom products Installation of certain products including without limitation glass products i e shower and tub doors by an inexperienced installer may result in glass breakage and consequently cause personal
17. iption of problem please note that additional information such a photos may be required to fully process your warranty claim 4 Proof of purchase You may submit this information by e mail mail or fax to DreamLine Warranty Service Center 75 Hawk Road Warminster PA 18974 F 1 866 857 3638 T 1 866 731 2244 Warranty bathauthority com dream in style TEL 866 731 2244 FAX 866 227 1533 WWW BATHAUTHORITY COM For more information on DreamLine Shower Doors please visit www BathAuthority com
18. legance Rev 4 Ver 1 07 2013 31 Style D Glass Shelves Assembly and Installation NOTE Use parts from Diagram B for the Glass Shelves assembly and installation 43 Mark the Glass shelf 22 position on the wall According to the measurements in Fig 46 1 mark the drilling holes for the Shelf brackets without nut 31 Drill the holes using O 5 16 drill bit and insert the Wall anchors 23 Attach the Shelf brackets without nut to the wall using the Countersunk screw ST4 2X40 32 and attach the Shelf brackets with nut 30 to the Stationary glass 21 Insert the Glass shelves into the Shelf brackets and fasten the screws at the bottom of the brackets See fig 46 for details Elegance Rev 4 Ver 1 07 2013 32 Maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface To insure long lasting life for your glass shower products wipe them off after each use with a soft cloth Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup Never use abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface Never use bristle brushes or abrasive sponges To assure a long lasting
19. ls 29 Run a silicone bead along the holes on the wall Attach the Wall profile for glass door 01 and Pivot retainer 08 to the wall using Big flat head screws ST4 2x40 16 See fig 31 for details Elegance Rev 4 Ver 1 07 2013 23 30 Attach the Pivot assembly 07 to the top and the bottom ends of the Glass profile for glass door 02 with the Flat head screws ST4 2x25 15 and M4x16 bolt 13 See Fig 32 for details NOTE The Back plate K of the Pivot assembly should face inside of your shower 31 Slide the Glass profile for glass door 02 with Pivot assemblies 07 into the groove of the Wall profile for glass lie door 01 and secure the upper Pivot retainer 08 to the upper Pivot assembly 07 with Round head socket bolt M6x12 17 See fig 33 for details Elegance Rev 4 Ver 1 07 2013 24 NOTICE The Glass door has 2 cuts for the Pivot assemblies The deeper cut must be on the top 32 Remove the Bolts L and Back plates K from the upper and bottom Pivot assemblies 07 Place the Glass door 03 to the Pivot assemblies attach Back plates K to its position and fasten tight the Bolts Make sure the clear rubber Spacers J are in between the glass and the metal parts Secure tide the Glass door to the Pivot assemblies See fig 34 for details 33 Mount the Ha
20. n accident fire flood act of God or any other casualty Improper care and cleaning will void the warranty Use of cleaners containing abrasive cleansers ammonia bleach acids waxes alcohol solvents or other products not recommended for chrome or similar finish glass or acrylic will void the warranty For additional product maintenance instructions please refer to product installation manual DreamLine is not responsible for any issues arising in connection with errors or omissions in information provided on DreamLine s websites The warranty does not extend any non DreamLine plumbing or components installed by installers end users or by any party other than DreamLine THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE BATH AUTHORITY LLC DREAMLINE AND OR SELLER DISCLAIMS ALL LIABILITY FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES DREAMLINE IS NOT LIABLE FOR PERSONAL INJURIES OR DEATH TO ANY PERSON OR FOR ANY DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE LOSS OF USE LOSS OF TIME LOSS OF PROFITS INCONVENIENCE INCIDENTAL EXPENSES LABOR OR MATERIAL CHARGES OR ANY OTHER COSTS RESULTING FROM THE USE OF ITS PRODUCTS OR PERTAINING TO THE APPLICATION OF THE PRESENT WARRANTY OR RESULTING FROM THE REMOVAL OR REPLACEMENT OF ANY PRODUCT OR ELEMENT OR PART COVERED BY THIS WARRANTY PRODUCT WARRANTY
21. ndle 06 onto the Glass door 03 See fig 35 for details Fig 35 Elegance Rev 4 Ver 1 07 2013 25 34 Press the Anti water strip 29 onto the vertical edge of 3 Ul the Stationary glass 21 Carefully butt the Stationary glass up against the wall vertically according to the measurements in size table While securely holding the Stationary glass close the Glass Door 03 and align the Stationary glass to it If needed adjust the position of the Stationary glass to make sure the Anti Water strip makes tight contact to the Glass Door from top to bottom Outline the position of the Wall profile 05 on the wall from inside the shower See fig 36 for details Detach the Wall profile 05 from the Glass profile 04 Place the Wall profile to the outlined position and mark the drilling holes through the predrilled holes in the Wall profile Drill the holes using 5 16 drill bit in the wall Insert the Wall anchors 12 into the holes and apply silicone along the Wall profile and around the holes Fasten the Wall profile to the wall with the Big flat head Screw 5 4 2 40 16 Push the Stationary glass 21 with the Glass profile 04 back into the Wall profile See fig 37 amp 38 for details Elegance Rev 4 Ver 1 07 2013 Fig 37 26 36 Push the Anti water strip 10 into the vertical groove of the Glass profile for glass door 02 Attach the Bott
22. nter of the drain is 1 2 Tools Required Tape Measure Pencil L evel SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 2 SINGLE THRESHOLD SHOWER BASE Center Drain Configuration MODEL SPECIFICATION D1 in in DLT 1132320 32x37 DLT 1136360 36 x36 DLT 1136480 36 x48 30760 327x607 Mex i9 3 _ 60 3 i9 30 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Left Hand Drain Configuration i MODEL SPECIFICATION D1 in WT1 in 30 i19 32 15 DLT 1132601 32 x60 L 82 T 86027 d5 wq 12 DLT 1134601 34 x 60 34 60 DLT 1136601 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 Right Hand Drain Configuration WI D1 MODEL SPECIFICATION D1 in W1 in 30 x 60 mo ox ow ode oam omaa 36x59 1 i17 _ 36 6 ix _ SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 NEO SHOWER BASE 01722036360 36736 18 5 16 DLT 2088380 38538 38 20516 25 m DLT 2040400 40 22 5 16 14 3 8 DLT 2042420 4254 4X SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 QUARTER ROUND SHOWER BASE DLT 7033330 33 33 21 5 8 DLT 7036360 36 x36 21 5 8 DLT 7038380 38 x38 21 5 8 SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 DOUBLE THRESHOLD SHOWER BASE Corner Drain Configuration MODEL SPECIFICATION W in C in DLT 103232
23. old and the pivot bracket Also apply silicone between the wall and the wall profiles See Fig 23 and Fig 24 for details NOTE If you need to install the door on the right wall simply exchange the position of the wall profile for glass door 01 and the wall profile 05 Elegance Rev 4 Ver 1 07 2013 RS Fig 23 Fig 24 19 Style B and D Stationary Glass Assembly and Installation NOTE Use parts from Diagram B or C depends on your model style for the Stationary Glass assembly and installation Glass shelves installation 24 Mark the Glass shelf 22 position on the wall According to the measurements in Fig 25 1 mark the drilling holes on the wall for the Shelf brackets 31 Drill the holes using O 5 16 drill bit and insert the Wall anchors 23 Attach the Shelf brackets 31 to the wall using the Countersunk screw 4 2 40 32 and attach the Shelf brackets 30 to the Stationary glass 21 Insert the Glass shelves into the Shelf brackets and fasten the screws at the bottom of the brackets See Fig 25 and Fig 26 for details Elegance Rev 4 Ver 1 07 2013 20 Style C and Shower Enclosure Assembly and Installation NOTE Use parts from Diagram A and Diagram B or C depends on your model style for the Shower Enclosure assembly and installation
24. om anti water strip 11 onto the glass door You can cut the strips to size by using a knife See Fig 39 for details Elegance Rev 4 Ver 1 07 2013 2 37 Adjust the width of the opening section of the Glass door 03 by loosen the holding screws on the Pivot assemblies 07 Level the Glass door and the Stationary glass 21 position to ensure the Glass door has a tight contact to the flange of the Anti water strip 10 from top to bottom Install the Bracket 27 onto the Stationary glass and drill the hole using O 1 8 drill bit Use Round head screws ST4 2x25 25 to attach the Bracket to the shower base or the threshold Cover the screw location with Decorative cover 26 See fig 40 for details 38 Close the hole in the bottom Pivot retainer 08 with Flat head socket bolt M6x12 18 or you can attach the Pivot retainer to the Shower base or threshold using Big Flat head screw ST4 2x40 16 Apply silicone sealant over the Screw 16 or Bolt 18 to prevent leakage See fig 41 for details Elegance Rev 4 Ver 1 07 2013 28 39 Do the final adjustment if necessary Make sure the Glass door 03 closes tight to the Anti Water strip 29 See fig 42 for details 40 After final adjustments of the Assembled unit drill the holes in the Glass profiles 02 and 04 through predrilled holes in the Wall profiles 01 and 05 using O 1 8 drill bit NOTE You only need to drill through the firs
25. oof Drywall Waterproof Drywall 7 Allow the bedding material to completely harden before applying weight to the bottom of the shower base Install the cement board or the wallboard above the tile flanges and secure it to the studs Put the tiles or other finishing material over the cement board leaving 1 8 gap between the bottom of the tile and the Caulk Ceramic Tile splash rim of the shower base Use caulk to fill that gap See Fig 8 and Fig 9 for details SLIMLINE SHOWER BASE Rev 3 Ver 5 07 2013 15 Product maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface To insure long lasting life for your glass shower products wipe them off after each use with a soft cloth Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup Never use abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface Never use bristle brushes or abrasive sponges To assure a long lasting finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corros
26. s profile 04 assembly back into the Wall profile See Fig 13 for details Elegance Rev 4 Ver 1 07 2013 13 14 Adjust the width of the Glass door 03 by pulling out the Glass profiles 02 and 04 if it necessary for size of your door Adjust the Glass door using a level and tighten in place with the Round head socket bolt M6x12 17 Close the glass door and make sure that there is 1 16 1 8 gap between the glass door and the anti water strip See Fig 14 for details 15 After final adjustments of the Assembled unit drill the holes in the Glass profiles 02 and 04 through predrilled holes in the Wall profiles 01 and 05 using O 1 8 drill bit NOTE You only need to drill through the first layer of the Glass Profiles Use Round head screws ST4 2x10 14 to secure the Glass profiles inside of the Wall profiles Cover the exposed screw holes with Decorative cover 09 See Fig 15 for details Elegance Rev 4 Ver 1 07 2013 Fig 14 14 16 Apply silicone sealant between the tray or threshold and the pivot bracket Also apply silicone between the wall and the wall profiles See Fig 16 for details Elegance Rev 4 Ver 1 07 2013 Fig 16 T3 Style B Stationary Glass Assembly and Installation NOTE Use parts from Diagram B and C for the Stationary Glass assembly and installation 17 18 Apply clear silicone
27. sing the detailed diagram and packing list in your manual as a reference Before discarding the carton check for small hardware bags that tend to fall to the bottom of the box If any parts are damaged or missing please contact DreamLine for replacement STYLEA Single Shower door 2514 373A Diagram A must be used for assembly Pages 6 15 STYLE B Shower door with 12 or 24 Stationary glass and Glass Shelves Diagram A and Diagram B must be used for assembly Pages 6 11 16 20 STYLEC Shower Enclosure with 30 or 34 Return Stationary glass and Support Arm Diagram A and Diagram C must be used for assembly Pages 21 31 STYLE D Shower Enclosure with 30 or 34 Return Stationary glass and Glass Shelves Diagram A and Diagram B must be used for assembly Pages 21 30 32 Elegance Rev 4 Ver 1 07 2013 4 Self Closing Pivot Assembly Parts List B _ ip H Spn ape D WaheA ip J Spacer aps t Water ipe k _ Pvotbody i Bo Elegance Rev 4 Ver 1 07 2013 Style A Single Shower Door Assembly and Installation NOTE Use parts from Diagram A for the Single Shower door assembly and installation 1 Place the Wall profile for glass door 01 on the shower base or the threshold vertically against the finished wall Adjust the Wall profile for glass door vertically
28. t layer of the Glass Profile Use Round head screws ST4 2x10 14 to secure the Glass profiles inside of the Wall profiles Cover the exposed screw holes with Decorative cover 09 See fig 43 for details Elegance Rev 4 Ver 1 07 2013 29 41 Apply silicone sealant between the tray or threshold the stationary glass and the accessory Also apply silicone between the wall and the wall profiles See fig 44 for details Elegance Rev 4 Ver 1 07 2013 AG AP 30 Style C Support Bar Assembly and Installation NOTE Use parts from Diagram C for the Support Bar assembly and installation 42 Locate the Support bar 22 Adjust the bar to a proper position on the glass and the wall Level it horizontally Hold it firmly and outline the bracket s position on the wall Remove the Support bar and detach the wall bracket from it Place the wall bracket against its outlined position on the wall and mark the drilling hole Drill the hole using 5 16 drill bit insert the Wall anchor 23 and fasten the wall bracket to the wall with the Big flat head screws ST4 2X40 24 Attach the Support bar to the wall as shown on Fig 45 6 and tighten the set screws and the glass holding screw to secure the glass See fig 45 for details Fig 45 E
29. that prior to the installation the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles Irregular installation surface level or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process 4 Please NOTE The door has 1 out of plumb adjustment on each side Tools Required C Tape Philips Drill bit Drill bit Caulk Measure Pencil Screwdriver 2 5 16 2 1 8 Wood Level Gun Electric Hammer Mallet Knife Drill Elegance Rev 4 Ver 1 07 2013 2 Detailed Diagrams of Shower Door Components Diagram A Diagram B Diagram C E 14 Cus 6 y 27 25 md Diagram A 06 Hade 16 BigfltheadscrewSTA2X40 13pcs 08 Pivot retainer upper and bottom ipai 18 Flat head socket bolt M6x12 1pc 09 Decortivecovr __________ 8 19 Hexwenh 10 Antiwaterstip s Diagram B 27 e Diagram C Elegance Rev 4 Ver 1 07 2013 NOTE Unpack your unit carefully and inspect it Lay it out and identify all parts u
30. tionary glass and you only need to refer to Diagram A with Packing List A to complete the installation Steps 17 24 Follow these steps if the width of your door is 374 and over and you are installing the door and the stationary glass with glass shelves and you have to use Diagram A and B with Packing List A and B to complete the installation 11 Push the Glass profile 04 into the groove of the Wall profile 05 and push the Anti water strip 10 into the groove of the Lee Glass profile Close the Glass door 03 Adjust the position of the Glass T I door and position of the Wall profile on the wall to ensure the Glass door has a tight contact with the flange of the Anti water strip from top to bottom E _ See Fig 11 for details EC Fig 11 Elegance Rev 4 Ver 1 07 2013 12 12 Use a level to ensure that the Glass door 03 and the Wall profile 05 is absolutely vertical Draw a line along the vertical edge of the Wall profile on the wall Detach the Wall profile from the Glass profile 04 Place the Wall profile to the outlined position and mark the drilling holes through the predrilled holes in the Wall profile Drill the holes using 5 16 drill bit in the wall See Fig 12 for details 13 Insert the Wall anchors 12 into the holes and apply silicone along the Wall profile 05 and around the holes Fasten the Wall profile to the wall with the Big flat head Screw 4 2 40 16 Push the Glas
Download Pdf Manuals
Related Search