XEPA PSD3 Installation Guide
Contents
1. Power Supply DC12V Complies with FCC Part 15 Class B amp C Receiver Sensitivity S 85dBm Emission Frequency 2400 2483 5MHz Receiving Range up to 300ft Emission Power 14dBm Model NTSC Luminous Flux up to 600Im Product Size Lamp 230X125X195mm Color Temperature 6000K 7000K Solar Panel 180mmX150mmX15mm Motion Distance up to 50ft Receiver 91X45X120mm 13 Product Warranty amp Support Information For customer support call 800 284 8828 between 8 30am and 5 30pm Monday to Friday Pacific Time or visit www xepatech com This product comes with a limited warranty of 1 year from the day of purchase Proof of the date of purchase must be provided if the product is returned If the product is found to be defective in material or workmanship APEX will replace the defective part s If any of the product parts are found to be missing please contact APEX within ten 10 days of purchase XEPA TECHNOLOGIES by APEX DIGITAL INC 4401 Eucalyptus Avenue Suite 100 Chino California 91710 01 06 2012 Made in China2. appropriate settings are in place For a period of 6 minutes the camera will turn on and record 10 seconds of video or photography when motion is detected Be sure to switch the device to AUTO when testing is complete Recharging the Battery e Plug in the solar panel charger the battery will charge whether the switch is set to OFF AUTO or TEST positions e You can also charge the light with an approved power adapter 9V 2000mA adapter not included but available on website e Light will not work once battery is removed from the jacket 10 Please plug in the solar panel charger or any other approved power adaptor after put battery back to the jacket to reactivate the light Warning Do not mix old and new batteries and Do not mix alkaline standard carbonzinc or rechargeable ni cad ni mh etc batteries Only Xepa Technology rechargeable batteries should be used It is available on www xepatech com or contact 800 284 8828 FCC Part 15 Class B amp C CAUTION Modifications not approved by the party responsible for compliance could void user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and can radiate radio frequency energy and if not installed a
3. 3 Motion Sensor Lens 8 Vertical Adjust Knob 4 Built in Camera 9 Adjust Knob 5 Antenna Installation Recommendations The PSD3 light fixture should be installed on a flat and stable surface the higher the light is placed the larger the area of illumination Avoid installing the light near an air conditioner heater or high voltage system since quick changes in temperature may activate the motion detection system and run down the light s power Avoid positioning the motion sensor head towards street traffic or where other movements may trigger the light needlessly and drain the battery The solar panel should be installed facing the sky where direct sunlight can shine on the panel at least 6 8 hours per day Before initial use the panel will need 2 3 days of sunlight exposure to fully charge the battery The motion sensor is most sensitive to movement across the device and less sensitive to motion directly towards or away from it Periodically use a soft damp cloth to clean accumulated dust or snow Off of the solar panel This will preserve the panel s battery charging efficiency Installing the LED Security Light 1 Mark holes on the wall through the Installation template 2 Drill holes with a 3 16 drill bit 3 Gently tap the plastic anchors into the holes until they are flush with the mounting surface 4 Secure the screws into the plastic anchors leave approximately 3 16 of each screw exposed for mountin
4. Solar Powered LED Security Camera Light amp Wireless DVR MODEL PSD3 Please do not return this item to the store For service or questions about your solar light call our customer service at 800 284 8828 8 30am 5 30pm Monday to Friday Pacific Time or visit Introduction Thank you for purchasing the PSD3 Solar Powered Security Light with the digital wireless DVR security system the most cost effective way to illuminate and protect your home business and recreational areas With its easy setup and lightweight design this light conforms to most of your lighting needs and is especially useful where an electrical outlet is not accessible The PSD3 Solar Powered Security Light converts sunlight to electricity so lighting is available wnerever and whenever you desire Simply install the solar charging panel in an area where sun exposure is prevalent the attached 15 cable provides sufficient length for easy placement In AUTO mode normal operation setting the light illuminates at night only when motion is detected then automatically resets Important Safety Information Do not expose the light to fire or intense heat Do not immerse in water Never look directly into the light or shine it in another persons eyes Dispose of the battery in accordance with local state and federal regulations Do not burn or discard the battery in a municipal water system or other body of water Consult lo
5. cal safety guidelines for installing the light fixture on a building Only use batteries from XEPA TECHNOLOGIES to ensure compatibility Refer to the product s original battery for correct size Always position the battery so it has the correct polarity and Light will not work once battery is removed from the jacket Please plug in the solar panel charger or any other approved power adaptor after put battery back to the jacket to reactivate the light What s Inside the Package PSD3 solar light with built in camera and rechargeable battery Solar charging panel with 15 cable DVR with adapter and a 2G SD card User manual including installation template sticker Quick Start Guide Screws and anchors Audio video connecting RCA cable Features e Solar powered lighting no electricity bill e 2 x SW super bright LEDs equal to 60W incandescent bulb e 2 4 GHz digital wireless transmission enables DVR to receive pictures and sound without any drops or interference e SD card enables storage of videos and photos Detects motion at a distance of up to 50 ft e Two lamp heads for dual direction illumination e Auto illumination from dusk to dawn e High efficiency rechargeable lithium battery produces zero emissions Product Profile o i 1 Lamp Head 6 Battery Housing 2 Motion Activated Indicator 7 Horizontal Adjust Knob
6. er approved power adaptor after put battery back to the jacket to reactivate The battery While in AUTO mode if there is frequent activity from dusk to does not fully dawn or consecutive overcast days the solar panel may not charge convert sufficient ambient daylight to recharge the battery Reposition solar panel to receive more sunlight Clean dust and debris from solar panel Make sure the solar panel cable is not damaged The light stays Check the motion detector to ensure that it is not directed towards on continuously street traffic or where other movements may trigger the light while in AUTO needlessly mode The lights on the Check DVR menu to ensure camera is registered and auto paired receiver do not work There is no e Check that the DVR power supply is working picture on the e Make sure the distance between the DVR and the monitor or the picture is not light camera unit does not exceed 50 100 feet clear e Check the connection between DVR and TV e Adjust DVR antenna direction to capture digital signal Motion has not Check the motion sensor lens for dust or damage been detected Avoid installing the light near an air conditioner central heater within the or hot air flow coverage area Specifications Rechargeable Battery 7 4V 2200mah Motion Range 160 Lithium lon battery Video coding H264 480 272 25fps Solar Charging Panel 12V 3W Mono Switch Model OFF AUTO TEST Crystalline Receiver
7. g the unit 5 Place the light camera unit over the screws gently push down on the unit to slide the screws into locking position pa 6 Rotate tilt the motion detection sensor camera towards the desired coverage area 1 Find a location for the solar panel that receives direct sunlight for a minimum of 6 8 hours a day and is within 15 of where the Security Light will be installed 2 Mark the holes through the mounting template 3 Using a 3 10 drill bit drill holes in the spots you marked Gently tap the mounting anchors into the holes until they are flush with the mounting surface Place the base of the solar panel over the drilled holes secure the screws through the base into the plastic mounting anchors Extend the cord from the solar panel to the light box completely insert the cable plug into the INPUT hole located on the bottom of the light unit Adjust the motion detection sensor and camera towards the desired coverage area Light Camera Functions OFF Neither the light nor the camera will function the product will be completely off but the solar panel will keep charging the battery AUTO The LED light will illuminate for 1 minute when motion is detected at night The camera will turn on when motion is detected during the day or night Motion will be recorded for 10 seconds each time TEST The LED light will illuminate continuously for 5 minutes and flicker for 1 minute to ensure the
8. nd used in accordance with the instructions may cause harmful interference to radio or television reception The source of the interference can be tested by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet circuit different from where the receiver is connected e Consult the dealer or an experienced radio TV technician for help wee the Wireless DVR Use the AV cable supplied with your unit to connect to it to a TV monitor 2 Insert the 5V AC power adapter into the power jack on the DVR power it on 3 Rotate the antenna if necessary to get a clear picture 4 See detailed instructions in DVR Operation Instruction Troubleshooting Tips pen The light will e Switch to TEST mode to check that the light can illuminate even not illuminate during the daytime Make sure battery is not drained and solar panel plug is fully inserted Make sure the battery plug is connected inside the battery compartment Set switch to OFF or AUTO mode and allow the solar panel to absorb direct sunlight for two or more days to recharge the battery Make sure there is no other brighter light source near the unit at night time Once battery is removed from the jacket Make sure plug in the solar panel charger or any oth
Download Pdf Manuals
Related Search