Glomar HD-896 Installation Guide
Contents
1. ASSEMBLY INSTRUCTION NOTE Please consult a qualified electrician if you are not certain of the installation CAUTION Before starting the installation disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box l Fasten Cross Bar onto Outlet Box using 2 Outlet Box Screws Make sure the thread of the mounting screws is facing outside when the Cross Bar is attached to the Outlet Box 2 Using 2 pliers twist opens the links at two ends of the Chain Hook one link to the Loop of the Canopy and close the link Hook the other link to the Loop of the fixture and close the link Wave the fixture wires up through the chain links the Loop and the Canopy in the Cross Bar 3 Connect wires with white to white and black to black cover the connections by using the Wire Connectors provided Tie the ground wire from Outlet Box and from fixture to the Ground Screw on the Cross Bar 4 Fasten the Canopy onto the ceiling using the Lock Nuts provided 5 Unscrew the Bottom Finial from the Shade Install candle tube and bulb Not included then fasten the Shade onto the Fixture Body by screwing the Finial 6 Turn on the power E pew Outlet Box Wire Connector Ground Screw Outlet Box Screw Mounting Screw Loop Bulb Shade f inial
Download Pdf Manuals
Related Search