Hampton Bay PN-1MYA-TRK Instructions / Assembly
Contents
1. proceed to the electrical connection O Unscrew the two side screws HH and pull the track head H out o Unscrew the wire nuts AA and unlace the knot K Pull out the cable C from the track adapter E 3 Installing the crossbar Turn off the power at the main fuse box before installation Attach the crossbar BB to a junction box with the outlet box screws CC provided HAMPTONBAY COM Please contact 1 877 527 0313 for further assistance Installation Surface Mounting continued 4 Connecting the wires to connect wires and push all excess wires and connections NOTE Always use wire nuts AA or marrettes included A back into the junction box O Connect the ground wire from the branch circuit to the ground screw EE on the crossbar BB o Connect the pendant cable C as follows WHITE WIRE FROM FIXTURE FROM HOUSE I I I I TRANSPARENT WIRE il BLACK WIRE I I I I I ri TRANSPARENT WIRE MARKED WITH A WHITE LINE FROM FIXTURE FROM HOUSE TRANSPARENT WIRE MARKED WITH A GREEN LINE FROM FIXTURE GROUND WIRE CONNECTING TERMINAL FROM CROSSBAR 1 o Insert the mounting screws DD through the holes in sides of the canopy A to attach the canopy A to the crossbar BB 5 Installing the bulb o Insert the GU10 50W shielded bulb GG and rotate2. 143 or CAUTION To reduce the risk of a burn during relampimg remove from the track before relampimg IMPORTANT Do not install any part of this system less than 5 feet above floor SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT The proper method of mechanically securing and electrically connecting each electrical fitting to the track shall be clearly described WARNING Disconnect electrical power before adding to or changing the configuration of the track or modifying the light system IMPORTANT Inspect the wire insulation for any cuts abrasions or exposed copper that have occurred during IMPORTANT Do not install any luminaire assembly closer UPC 77354624171 7 than 6 inches from any curtain or similar combustible material shipping If there is a defect in the wire do not continue the assembly process Please call our Customer Service Team at 1 877 527 0313 Warranty LIMITED WARRANTY WHAT IS COVERED The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion p
3. it clockwise using the suction cup FF Care and cleaning o Clean the light fixture carefully with a soft dry cloth Do not use any cleaner with chemicals solvents or harsh abrasives Troubleshooting Problem Possible Cause Solution o The bulb will not light o The bulb is burned out o Replace the light bulb Ensure that the power supply is turned on The power is off O Ensure that the circuit breaker is set to o The circuit breaker is off the ON position o The fuse blows or the circuit O There are too many items on O Unplug the other items on the circuit breaker trips when the light one circuit a o is turned on Contact a gualified electrician or call the Customer Service Team at 1 877 527 0313 9 HAMPTONBAY COM Please contact 1 877 527 0313 for further assistance Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 877 527 0313 HAMPTONBAY COM Retain this manual for future use
4. Item 141 143 Model PN 1MYA TRK USE AND CARE GUIDE MYA CONVERTIBLE TRACK PENDANT Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 877 527 0313 HAMPTONBAY COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this convertible track pendant We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Hampton Bay Table of Contents Table of Contents ccsscseeeeeeiee 2 Package Conte nts ssssssssseseeees Safety Information scscscssceseeees 2 UnstallatiOnesecincssssecicscsscecaesssccscetssesecesssteed Warranty Track Adapter Mounting Pre Installation Planning Installation ccccceeed Gare amp ClAMiNng eeccecsseseeeeees Tools Required Hardware Included sssssssssseeee 3 Safety Information O Read all instructions before installing O Consult a qualified electrician for installation of this fixture o For use with EC or H Series Hampton Bay track system IMPORTANT Do not install this lighting system in damp or O If you have any non electrical questions about this fixture please contact our Customer Service Team at 1 877 527 0313 or visit www hamptonbay com Please reference your SKU 141
5. ing Keep your receipt and these instructions for proof of purchase TOOLS REQUIRED Safety goggles Flathead screwdriver Wire strippers Wire cutters Ladder Electrical tape HARDWARE INCLUDED A NOTE Hardware not shown to actual size Wire nut Crossbar Outlet box screw Mounting screw Ground screw Suction cup GU10 50W bulb 3 HAMPTONBAY COM Please contact 1 877 527 0313 for further assistance Pre Installation continued PACKAGE CONTENTS Part Desorption SSCS Cty a emy i y O o Ce wenom SCS o e Peame SSCS SC Cd Fixture body Track adapter Installation Track Adapter Mounting 1 Adjusting the cable length Connecting the track adapter wires IMPORTANT This fixture is provided with 6 ft of cable If a shorter length is desired follow these steps carefully Failure to follow these instructions will result in the failure of this product If length is suitable proceed to step 3 NOTE Always use wire nuts AA or marrettes included to A connect wires and push all excess wire and connections back into the track adapter housing E Unscrew the two side screws HH and pull the track head H out o Unscrew the wire nuts AA and unlace the knot K Pull out the cable C from the track adapter E o Cut the pendant cable C to the desired length o Pass the
6. pendant cable C through the wire clamp B and the track adapter E housing o Tie a knot K in the pendant cable C The shortest height allowed is 17 in o Separate a portion of the pendant cable C from the interior insulated wire and expose about 1 2 in of the insulated wire o Connect the pendant cable C as follows using wire nuts AA TRANSPARENT WIRE 1 MARKED WITH A WHITE LINE WHITE WIRE FROM FIXTURE FROM TRACK HEAD TRANSPARENT WIRE A BLACK WIRE l I I PROMFIXTURE FROM TRACK HEAD TRANSPARENT WIRE I MARKED WITH A GREEN LINE GROUND WIRE x FROM FIXTURE FROM TRACK HEAD s o Secure the pendant cable C by tightening the screw II on the wire clamp B o Fix the track head H to the track adapter E housing and secure with the two side screws HH HAMPTONBAY COM Please contact 1 877 527 0313 for further assistance Installation Track Adapter Mounting continued 3 Installing the track adapter to the track system CAUTION To reduce the risk of fire and electric shock use only luminaire assemblies marked for use with EC or H Series Hampton Bay track NOTE For proper connection the contact pins JJ on the A side of the track head H should be positioned against the contact points on each side of the track ensuring they are touching o Push
7. rovided that the product has not been damaged through misuse abuse accident modification alteration neglect or mishandling WHAT IS NOT COVERED This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse abuse negligence alteration faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Contact Customer Care at 1 877 527 0313 or visit www hamptonbay com Pre Installation PLANNING INSTALLATION Read all instructions before assembly and installation To avoid damaging this product assemble it on a soft non abrasive surface such as carpet or cardboard Inspect each part for defects that may have occurred during shipp
8. the track adapter E into the track opening and twist it to lock it in place Removing the track pendant lamp from the track system Hold the track adapter E and push down the unlock handle I on the track adapter E Twist to unlock the track adapter E 4 Installing the bulb Insert the GU10 50W shielded bulb GG and rotate it clockwise using the suction cup FF Installation Surface Mounting Disconnecting the cables from the track adapter 2 Connecting the pendant cables o Remove the crossbar BB from the canopy A by loosening the mounting screws DD on the canopy A Loosen the screw on the wire clamp B Measure the desired length of the pendant cable and add 6 in for re attachment o Pass the pendant cable C through the wire clamp B and the canopy A o Tie a knot K in the pendant cable C The shortest height allowed is 17 in o Separate a portion of the pendant cable C from the interior insulated wire and expose about 1 2 in of the insulated wire o Secure the pendant cable C to the canopy A by turning the screw on the wire clamp B IMPORTANT This fixture is provided with 6 ft of cable If a shorter length is desired follow these steps carefully Failure to follow these instructions will result in the failure of this product If length is suitable
Download Pdf Manuals
Related Search