Laura Ashley WAME0255 Instructions / Assembly
Contents
1. Assembly Instructions Aimee Wall Light WAME0255 WARNING BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE NOTE Before installing consult local electrical codes for wiring and grounding requirements _7 Wire Nut Q Fixture Grounding Wire lt Outlet Box T Back Plate Glass Cap X ANN Housing Grounding Wire j i he p j Candle Cover C3 Fixture Wire x Mounting Plate EAT gt Green endase Mounting Screw a Set Screw Socket Holder Nipple Rubber Pad Glass Holder Cap Finial S Pearl Strand _ Attach the mounting plate to the outlet box by using two mounting screws 2 Pull out the outlet wires and the house grounding wire from the outlet box Make wire connections using the wire nuts Connect the black wire from the fixture to the black wire from the power source Connect the white wire from the fixture to the white wire from the power source Attach the fixture grounding wire to the mounting plate with the green grounding screw Then connect it to the house grounding wire with a wire nut Carefully put the wires back into the outlet box 3 Attach the back plate to the mounting plate by aligning the holes then secure it with two set screws 4 Attach the candle covers and glass caps onto the sockets then install bulbs not included See relamping label at socket area or packaging2. for maximum allowed wattage 5 Attach two rubber pads and glass holder to the holder then secure them with the cap and finial 6 Install the crystal drops and pearl strands as shown in diagram Note To replace broken crystal drops Open the pins to remove the crystal drops hook the new crystal drops and then close back pins Avoid bending the pins into sharp angle 7 Turn on the power at the main fuse or circuit breaker box
Download Pdf Manuals
Related Search