Home Decorators Collection 93080COP Instructions / Assembly
Contents
1. READY USE 10 2013 93080 INSTALLATION2. MODEL 95080 PACKING DIAGRAM STYROFOAM 12 KGS UI ACKPLATE ASSEMBLY STYROFOAM 12 KGS WIRE CONNECTOR 3 PCS 8 32 SCREWS SUPPLIED WITH BOX OUNTING PLATE 2 NUTS BACKPLATE AVAILABLE PART IS BLACK 93080GS GLASS SHADE SOCKET BALL F 2 PCS BLACK SUPPLY WIRE WHITE SUPPLY WIRE GLASS SHADE SUPPLY 93080GS GROUND WIRE REPLACEMENT GROUND OUTLET BOX PART WIRE GREEN GROUND SCREW WHITE FIXTURE WIRE SOCKET INSTALLATION _ INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRST TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES IF YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR FIXTURE INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS FIXTURE IS BE MOUNTED UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE WEIGHT OF THIS FIXTURE THE OUTLET BOX MUST BE DIRECTLY SUPPORTED BY THE BUILDING STRUCTURE TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT SCREWDRIVER PLIERS ADJUSTABLE WRENCH UNPACK THE FIXTURE YOU SHOULD HA
3. VE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE BACKPLATE ASSEMBLY GLASS SHADE AND SOCKET RING HARDWARE PACK 2 8 32 x 1 1 4 SCREWS 3 WIRE CONNECTORS TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE INSTALL THE FIXTURE 1 REMOVE THE MOUNTING PLATE FROM BACK OF THE BACKPLATE ASSEMBLY BY UNSCREWING 2 BALL FINIALS 2 ATTACH THE MOUNTING PLATE TO OUTLET BOX USING TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 3 CONNECT THE WHITE OR RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE 5 WIRE CONNECTOR PROVIDED CONNECT THE BLACK OR SMOOTH FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 4 RAISE BACKPLATE ASSEMBLY TO THE WALL AND CAREFULLY TUCK THE WIRES INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE LINE UP SCREWS WITH HOLES IN BACKPLATE AND SECURE WITH 2 BALL FINIALS 5 PLACE GLASS SHADE OVER SOCKET AND SECURE WITH SOCKET RING 6 INSTALL A 60 WATT MAXIMUM MEDIUM BASE TYPE A BULB INTO SOCKET 0 7 RESTORE POWER YOUR NEW FIXTURE IS
Download Pdf Manuals
Related Search