Kenroy Home 93324CHC Installation Guide
Contents
1. THE FOLLOWING TOOLS OR EQUIPMENT SCREWDRIVER PLIERS ADJUSTABLE WRENCH UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE BACKPLATE ASSEMBLY GLASS SHADE AND 2 SCREWS HARDWARE PACK MOUNTING PLATE 4 8 32 x 1 1 4 SCREWS 2 NUTS 3 WIRE CONNECTORS GREEN GROUND SCREW AND 2 BALL FINIALS TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE INSTALL THE FIXTURE 1 INSERT 2 8 32 x 1 1 4 SCREWS INTO MOUNTING PLATE TO LINE UP WITH HOLES IN BACKPLATE ATTACH MOUNTING PLATE TO OUTLET BOX USING TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 2 CONNECT THE WHITE OR RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED CONNECT THE BLACK OR SMOOTH FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 3 RAISE BACKPLATE ASSEMBLY TO THE WALL AND CAREFULLY TUCK THE WIRES INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE LINE UP SCREWS WITH HOLES IN BACKPLATE AND SECURE WITH 2 BALL FINIALS 4 SECURE THE GLASS SHADE T2. MODEL 93324CHC PACKING DIAGRAM STYROFOAM 12 KGS BACKPLATE ASSEMBLY AND OTHER PARTS MOUNTING HOLE 2 PCS BACKPLATE WIRE CONNECTOR 3 PCS BLACK 8 32 SCREWS FIXTURE SUPPLIED WITH BOX OUNTING PLATE 2 NUTS dump 2 8 32x1 1 4 22 SCREWS SUPPLY WIRE bi SHADE gt NY WHITE it SUPPLY WIRE SUPPLY GROUND WIRE GROUND OUTLET BOX BALL FINIAL 2 PCS WIRE GREEN SCREW 2 PCS GROUND SCREW SOCKET 2 PCS IXTURE WIRE FRONT VIEW INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS FIXTURE SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES IF YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR FIXTURE INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS FIXTURE IS TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE WEIGHT OF THIS FIXTURE THE OUTLET BOX MUST BE DIRECTLY SUPPORTED BY THE BUILDING STRUCTURE TOOLS YOU WILL NEED
3. O THE BRACKETS ON BACKPLATE WITH 2 SCREWS NOTE TO PREVENT BREAKING THE GLASS SHADE DO NOT OVER TIGHTEN THE SCREWS 5 INSTALL A 40 WATT MAXIMUM CANDELABRA BASE TYPE B BULB NOT INCLUDED INTO EACH SOCKET 6 RESTORE POWER YOUR NEW FIXTURE IS NOW READY FOR USE 03 2014 93324CHC INSTALLATION
Download Pdf Manuals
Related Search