Home Decorators Collection 1235700420 Installation Guide
Contents
1. up the cord and g Ceiling against the ceiling a _ QO FO Fig 4 To hold the canopy in place against the ceiling finger tighten the compression nut D by turning it clockwise A CAUTION Do not over tighten the compression nut D HELPFUL HINT If the canopy does notsit tight against the ceiling loosenthe compression nut D GENTLY pull down on the cord to flex the spring arm B then slide the canopy C back upand re tighten 5 Attach glass shade E to lamp cup G add spacer ring H if necessary and thenscrew on thesocket ring E clockwise until tight Spacer ring H is only needed if glass shade F is loose when using justthe socket ring E A CAUTION Do not over tighten as it may result in breaking the glass shade Bulb not included Fig 5 CARE AND MAINTENANCE Shut off light and let bulb and glass shade cool if necessary Wipe glass shade with soft cloth or household glass cleaner Do not use abrasive cleaners For replacement bulbs use 75 watt maximum Type Aor suitable medium base bulb not included including CFL bulbs A WARNINGS AND CAUTIONS WARNING e Risk of fire or electrical shock Do notalter relocate or remove wiring lampholders ballasts or any other electrical component e Risk of fire or electrical shock Install this kit only in the luminaries that have the construction features and dimensions shown in the photographs and or drawings CAUTION e Do not make or al2. HOME DECORATORS COLLECTION Instant Pendant Light Recessed Light Conversion Kit Assembly Instructions HDC 1235700420 MFG PBN 3524 1000 Please read over the instructions it will be a time saverin the long run PACKAGE CONTENTS Description Quantity Socket adapter Spindle bracket Canopy Compression nut Socket ring Glass shade Lamp cup Spacer ring optional Style and finish will vary by item Bulb notincluded Questions problems missing parts Before returning to your retailer call our customer service departmentat 1 866 384 9400 9 a m 5p m EST Monday Friday Include e mail address if applicable PREPARATION Before beginning assembly of product make sure all parts are present Compare parts with package contents listand diagram above If any partis missing or damaged Do not attempt to assemble the product Contact customer service for replacement parts Estimated Assembly Time 10 15 minutes Helpful Tools ASSEMBLY INSTRUCTIONS 1 Adjust excess cord by wrapping itaround spindle bracket B just belowthe socket adapter A Position the last wrap so the cord will hang in the center of your recessed light fixture 2 Screw the adapter A into the light bulb socket in your recessed light fixture 3 After finger loosening the compression nut D by turning it fee aaa counter clockwise slide the canopy C
3. stallation or the use of the product or any indirect damages with respect to loss of property revenue or costs for removal re installation As some states do not allow exclusions of limitations on an implied warranty the above exclusion and limitation may not apply This warranty gives you specific rights and you may also have other rights which may vary from state to state www WorthHP com U S Patent No 7 311 425 Printed in China
4. ter any open holes in an enclosure of wiring or electrical components during kitinstallation TROUBLESHOOTING Problem Possible Cause Corrective Action Loosen the compression nut D and GENTLY Cord has stretched out pull down on the cord to flex the spring arm B then slide the canopy C back up and re tighten Canopy does not fit tight against the ceiling Bulb is burned out Replace light bulb not included Power is off Make sure power supply is on Bad switch Test orreplace switch Bulb will not light WARRANTY The manufacturer warrants against defects in materials and workmanship for one 1 year from the date of purchase to the original purchaser If within this period the product is found to be defective take a copy of the bill of sale as a proof of purchase and the product in its original packaging to the place of purchase This warranty does not cover products becoming damaged or defective caused by abuse misuse accidents faulty installation improper handling and or maintenance or repairs not carried out by the manufacturer Items which are not covered by warranty are those considered as parts which are prone to failure due to general wear and tear for example lamps fuses glass materials There will be no obligations or liability on the part of the manufacturer for consequential damages arising from the use of the product or any indirect damages with respect to loss of property revenue or costs for removal In
Download Pdf Manuals
Related Search