Kenroy Home 32709ORBC Installation Guide
Contents
1. SJOW SJOW A SJTW SJTW A OR SJTOW SJTOW A 11 2014 327090RBC INSTRUCTIONS PAGE 2 22. MODEL 327090RBC PACKING DIAGRAM CARDBOAR es CA TITLE 2 CARDBOAR a POLE LOWER POLE DOME STYROFOAM 12 KGS GLASS DOME SBULBSHIELD REPLACEMENT SHADE 32709SHORBC REPLACEMENT PART STAINLESS STEEL STAINLESS STEEL SCREWS 2 PCS SHADE_DETAILS AVAILABLE PARTS ARE 32709SHORBC SHADE GSBULBSHIELD GLASS DOME 11 2014 327090RBC INSTRUCTIONS PAGE 1 2 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED WARNING WHEN USING FOR OUTDOOR USE FOLLOW IMPORTANT SAFETY INSTRUCTIONS LISTED AT BOTTOM OF PAGE TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK AND PERSONAL INJURY UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE SHADE SCREW GLASS DOME COLUMN ASSEMBLY 2 POLES AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 SCREW THE LOWER POLE TO TOP OF THE BASE 2 SCREW THE UPPER POLE TO TOP OF THE LOWER POLE 3 SCREW THE COLUMN ASSEMBLY TO TOP OF THE UPPER POLE 4 INSERT THE TWO SCREWS ON TOP OF CUP INTO THE TWO KEYHOLES IN GLASS DOME HOLDER AND TWIST THE SHADE CLOCKWISE 5 SECURE THE SHADE TO THE CUP WITH A SCREW THEN TIGHTEN THE OTHER 2 SCREWS 6 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 7 SCREW GLASS D
3. OME TO THE GLASS DOME HOLDER 8 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE GLASS DOME AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW GLASS DOME AND EXISTING BULB REPLACE WITH A NEW BULB AND RECOVER THE GLASS DOME PLUG POWER SUPPLY CORD BACK INTO OUTLET CLEANING THE SHADE WASH THE SHADE WITH A SOFT BRUSH AND MILD DETERGENT SUCH AS DISHWASHING SOAP AND THEN THOROUGHLY RINSED TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS 1 USE ONLY THREE WIRE OUTDOOR EXTENSION CORDS THAT HAVE THREE PRONG GROUNDING PLUGS AND GROUNDING RECEPTACLES THAT ACCEPT THE APPLIANCE S PLUG 2 GROUND FAULT CIRCUIT INTERRUPTER GFCI PROTECTION IS TO BE PROVIDED ON THE CIRCUIT OR OUTLET TO BE USED FOR THE WET LOCATION PORTABLE LUMINAIRE RECEPTACLES ARE AVAILABLE HAVING BUILT IN GFCI PROTECTION AND ARE ABLE TO BE USED FOR THIS MEASURE FOR THIS MEASURE OR SAFETY 3 USE ONLY WITH AN EXTENSION CORD FOR OUTDOOR USE SUCH AS AN EXTENSION CORD OF CORD TYPE SW SW A SOW SOW A STW STW A STOW STOW A SJW SUW A
Download Pdf Manuals
Related Search