Warehouse of Tiffany RL5676 Instructions / Assembly
Contents
1. ASSEMBLY INSTRUCTIONS MODEL RL5676 NOTE Only the technical personnel can be allowto fix and eaintain IMPORTANTI Make sure that the power is switch off at the electricity mains supply before commencing vork FIXING INSTRUCTIONS 1 Take out screw 4 and rotate it into crystal lifting ring 7 at least 6am and then tightened with washer 6 hexagonal nut 5 2 Rotate the nut of screw 4 till close to the first nut and then rotate screw 4 into batten 13 Make sure screw 4 should go through batten 13 3 Use outlet box screws 12 to fix batten 11 on outlet box 1 4 Tighten the nut to fix on batten 11 in the right position l 5 Ground Connection See picture 1 there are one tapping hole amp two dimples Find the supply ground wire 2 on the green ground screw 15 and then put it into tapping hole Connect the fixture ground wire 3 with supply ground wire 2 by connecting terminal 10 Caution DO NOT connect ground wire with supply pover wire 6 Connect fixture supply wire 7 with power supply wire 9 Caution Reaeaber to distinguish the positive and negative charges See picture 2 T Push canopy 8 up to the ceiling 8 Screw bulb 16 in the holder REPLACEMENT BULB Do not exceed the maximum wattage Light bulbs recommended RL5676 GU10 5 x 50W Max CLEANING CARE Clean with a soft dry cloth SAFETY INFORMATION 1 Lamp used must in rated voltage and do not touch the bulb with2. bare hands Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs 2 If the external cables have been denaged Pls change or repair by manufacturer or service agency or professional electrician In order to avoid the danger 10 Connecti 11 Batten 12 Outlet b 13 Screws 14 Batten 15 Groon gr 16 Bulb Waive Sapir Wire
Download Pdf Manuals
Related Search