Kenroy Home 32408ORB Installation Guide
Contents
1. ING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS AVAILABLE PARTS ARE THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS 32408GSORB GLASS SHADE WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 07 2014 324080RB INSTRUCTIONS2. MODEL 324080RB PACKING DIAGRAM u STYROFOAM 12 KGS PPER POLE ASSEMBLY MIDDLE POLE amp LOWER POLE ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE GLASS SHADE 3 FINIALS UPPER POLE ASSEMBLY MIDDLE POLE LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM GLASS SHADE 32408GSORB A 3 SCREW MIDDLE POLE TO TOP OF LOWER POLE 2 SCREW LOWER POLE TO TOP OF THE BASE MIDDLE 4 PULL THE EXCESS POWER CORD THROUGH THE BASE POLE 5 SCREW UPPER POLE ASSEMBLY TO TOP OF THE MIDDLE POLE 6 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 7 PLACE GLASS SHADE TO BOTTOM OF THE CUP AND SECURE WITH 3 FINIALS 8 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 DISASSEMBLE THE GLASS SHADE UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB REPLACE THE GLASS SHADE AND PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOT
Download Pdf Manuals
Related Search