Kenroy Home 32558MCLY Installation Guide
Contents
1. MODEL 32558 PACKING DIAGRAM CARDBOAR CARDBOAR CA TITLE 20 FINIAL HARP amp RUBBER WASHER STYROFOAM 12 KGS SOCKET ASSEMBLY STYROFOAM 12 KGS ASSEMBLY INSIRUCIIONS O READ AND SAVE THESE INSTRUCTIONS RUBBER READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO WASHER ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE SHADE ASSEMBLY DIAGRAM 32558SHMCLY REPLACEMENT 2 PULL THE EXCESS POWER CORD THROUGH THE BASE PART 3 SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY 22 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE REPLACEMENT TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 58 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATI MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT ASSEMBLY SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CO2. RD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS AVAILABLE PARTS ARE WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK T7TaT psSipi y aEsw am ri s OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED 55 OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 05 2014 32558MCLY INSTRUCTIONS
Download Pdf Manuals
Related Search