Kenroy Home 20123BS Instructions / Assembly
Contents
1. MODEL 20123 PACKING DIAGRAM CA TITLE 2 SHADE BOX J ARDBOARD ARM ASSEMBLY amp SOCKET RING POLE 2 PCS STYROFOAVM 12 KGS ARDBOARD ASSEMBLY INSTIRUCITIONS ma _ SOCKET RING READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH _PRIOR TO ASSEMBLY SHADE 20123SHBS THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO REPLACEMENT ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENVED THE FOLLOWING PARTS IN THE PACKAGE SOCKET RING SHADE ARM ASSEMBLY WITH SOCKET HANDLE UPPER POLE LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM 2 SCREW LOWER POLE TO TOP OF BASE 3 SCREW UPPER POLE TO TOP OF LOWER POLE ARM ASSEMBLY 4 INSERT PIN OF ARM ASSEMBLY INTO UPPER POLE AND TWIST THE ARM ASSEMBLY COUNTER CLOCKWISE TO SECURE 5 SCREW HANDLE TO BOTTIOM OF SOCKEI 6 PLACE HARP OF SHADE OVER SOCKET AND SECURE WITH SOCKET RING 7 INSTALL A 150 WATT MAXIMUM MEDIUM BASE 3 WAY TYPE A BULB NOT INCLUDED INTO SOCKET 8 YOU CAN ADJUST THE LAMP HEIGHT TO GET THE DESIRED POSITION 9 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCRE2. W EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUILET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT AVAILABLE PART IS CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN 20123SHBS SHADE EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 04 2012 20123BS INSTRUCTIONS
Download Pdf Manuals
Related Search