Hampton Bay 17100 Installation Guide
Contents
1. 16 Connector Assemble 17 Wire Connector 18 Wire Grip 3 Wire Page 4 Track Construction Cont Notice When installing or using this track system basic safety precautions should always be followed including the following a Read all instructions b Do not install this track in damp or wet locations c For track lighting systems other than those that comply with Section 31 Field Cutting Do not cut any track sections d Do not install any part of a track system less than 7 feet above the floor e Do not install any luminaire assembly closer than 6 inches from any curtain or similar combustible material f Disconnect electrical power before adding to or changing the configuration of the track g Do not attempt to energize anything other than lighting track luminaires on the track To reduce the risk of fire and electric shock do not attempt to connect power tools extension cords appliances on like items to the track h For installation with HAMPTON BAY EC series track only When the adapter is secured and ready for install 1 Hold down the Lock Lever turn Adapter 2 in a clockwise direction to Track 1 Twist ground side of connector towards ground side of track until connector snaps into place Release Lock Lever Install the proper Light bulb not included in accordance with the _ fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Installation2. and the black wire from the fixture to the black wire from the outlet box 13 Cover the two wire connections using the two provided wire connectors large 14 Wrap the two wire connections with electrical tape for a more secure connection If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it using the wire connector large 14 Otherwise connect the ground wire from the fixture to Ground screw 12 on the Crossbar 11 Note If you have electrical questions consult your local electrical code for approved grounding methods 7 Tuck these wire connections neatly into the ceiling outlet box and then raise the canopy all the way to the ceiling Secure the Canopy 7 against the ceiling with Mounting Screws 8 8 Install the light bulb not included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Installation is complete Turn on the power at the circuit breaker or fuse box Turn the light switch on to activate the fixture 7 Canopy 9 Set Screw 3 Wire 4 Metal Tube 19 Socket Cup 20 Screw 5 Shade Black wire White wire 14 Wire connector Large 12 Ground Screw 13 Outlet box Ground wire 11 Crossbar TCE Exe E 10 Outlet Box a Screw N 8 Mounting Screw 7 Canopy 9 Set Screw Page 6 TROUBLESHOOTING Possible Cause Correc
3. is complete Turn on the power at the circuit breaker or fuse box Turn the light switch on to activate the fixture 1 Connector is designed to lock into track section by turning connector in one direction only 2 Turn Ground indicator tab towards the ground groove on track to align ground tab with ground conductor Lock Lever Push down and twist to remove from track 19 Socket Cup 20 Screw 5 Shade 6 Bulb Page 5 Hardwire Installation Instructions 1 Secure the Metal Tube 4 to top of Socket Cup 19 2 Align the holes on the Shade 5 and Socket Cup 19 secure them with Screws 20 3 Determine the length of wire needed for proper hanging height Use a wire cutter to discard un wanted wire Note keep 2 additional length of wire for wire connection Carefully cut and remove approximately 2 of the outer sheathing from cord end and strip 3 8 of the wire ends bare to expose the copper strands CAUTION Be careful not to cut or damage the insulation on the inside wires when removing the outer insulation 4 Place the Wire 3 through the Canopy 7 and secure with Set Screw 9 Note Maintain the proper length of wire for wire connects 5 Attach the Crossbar 11 to the Outlet Box 13 with Outlet Box Screws 10 The side of the Crossbar marked GND must face out 6 Connect the white wire from the fixture to the white wire from the outlet box 13
4. product has not been damaged through misuse abuse accident modifications alterations neglect or mishandling This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse abuse negligence alteration or faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Page 7
5. INSTRUCTION MANUAL 1 Light Track Pendant in Brushed Nickel Finish Home Depot SKU 720 879 UPC 718212171004 Brushed Nickel fixture Track Construction Hardwire Construction LA 1599E S F Page 1 Thank you for purchasing this Hampton Bay Track Lighting This product has been manufactured with the highest standards of safety and quality FEATURES 1 Traditional 1 Light Track Pendant in Brushed Nickel Finish 2 Install as a Hardwire Mini Pendant or Track Pendant 3 Easy to assemble and install QUESTIONS PROBLEMS MISSING PARTS Before returning to your local Home Depot please call our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 720 879 Brushed Nickel fixture or UPC 718212171004 Brushed Nickel fixture Page 2 CAUTION 1 Before starting installation of this fixture or removal of a previous fixture disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box 2 CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS 3 If you have any non electrical questions about this fixture please contact our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 720 879 Brushed Nickel fixture or UPC 718212171004 Brushed Nickel fixture 4 Keep your receipt and these Instructions for Proof of Purchase TOOLS REQUIRED FOR ASSEMBLY amp INSTALLATION not included
6. f Light Bulb 60 watt maximum Safety goggles Step Ladder Wire strippers v o 6 n Flathead screwdriver Phillips screwdriver Electrical tape Wire cutters Page 3 PARTS INCLUDED FOR ASSEMBLY parts are not to scale 1 Canopy 7 3 Screw 20 1 Shade 5 PARTS INCLUDED FOR INSTALLATION parts are not to scale 1 Crossbar 11 2 Out Box Screw 10 1 Ground Screw 12 2 Mounting Screw 8 3 Wire Connector 14 INSTALLATION INSTRUCTIONS Track Construction 1 Secure the Metal Tube 4 to top of Socket Cup 19 2 Align the holes on the Shade 5 and Socket Cup 19 secure them with Screws 20 3 Please follow these instructions if you need to adjust the length of the wire before installation a Begin by determining the length of wire needed for proper hanging height Use a wire cutter to discard un wanted wire Note keep 2 additional length of wire for wire connection Carefully cut and remove approximately 2 of the outer sheathing from cord end and strip 3 8 of the wire ends bare to expose the copper strands CAUTION Be careful not to cut or damage the insulation on the inside wires when removing the outer insulation b Loosen the Screw 15 at the top of adapter using a screwdriver then take out the connector assembly 16 Wire Connectors 17 Wire Grip 18 and pass through the Wire 3 from the inside of the adapter 2 as shown in Fig 1 c Make wire connections 15 Screw
7. tive Action Bulb will not light 1 Bulb is burned out 1 Replace light bulb 2 Power is off 2 Make sure power supply is on 3 Faulty wire connection 3 Check wiring 4 Faulty switch 4 Test or replace switch Fuse blows or circuit Crossed wires or power wire Check wire connections breaker trips when light is grounding out is turned on PRODUCT MAINTENANCE 1 To clean the outside of the fixture use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the shade and surface of the fixture 2 To clean the inside of the fixture first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box Next use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the inside of the shade and exterior surface of the fixture 3 Do not use any cleaners with chemicals solvents or harsh abrasives Use only a dry soft cloth to dust or wipe carefully LIMITED WARRANTY The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the
Download Pdf Manuals
Related Search