Kenroy Home 32310GFBR Instructions / Assembly
Contents
1. AT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE REDUCE THE RISK ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 32310 INSTRUCTIONS2. MODEL 525 1 PACKING DIAGRAM SHADE BOX INIAL HARP amp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
Download Pdf Manuals
Related Search